Sony KDL-32EX301 - 32" Class Bravia Ex301 Hdtv Owner's manual

LCD STAND FOR TELEVISIONS
SERVICE MANUAL LCD STANDS
Stand_Assembly_01
HISTORY INFORMATION FOR THE FOLLOWING MANUAL:
6/28/2010 01 No revisions
STAND ASSEMBLY INFORMATION
ORIGINAL MANUAL ISSUE DATE: 6/2009
REVISION DATE MANUAL PN SUFFIX SUBJECT

KDL-32EX301/32EX400/40EX400/40EX401 12
Components not identified by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts ofan assembly are indicatedby the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
* Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE:Les composantsidentifies per un trameet
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
ARemove 4 screws from Table-Top Stand Assembly
BLift TV set up to detach from Table-Top Stand Assembly
CGently place the TV set face down onto a soft cloth
1 4-166-866-01 COVER,STAND(M3B)
(KDL-32EX301/32EX400 ONLY)
1 4-166-870-01 COVER,STAND(ML3B)
(KDL-40EX400/40EX401 ONLY)
2 X-2546-639-1 BASE (M3B) ASSEMBLY
(KDL-32EX301/32EX400 ONLY)
2 X-2546-640-1 BASE (ML3B) ASSEMBLY
(KDL-40EX400/40EX401 ONLY)
3 2-580-608-01 SCREW, +PSW M5X16
4 4-166-867-01 COVER,NECK(M3B)
(KDL-32EX301/32EX400 ONLY)
4 4-166-871-01 COVER,NECK(ML3B)
(KDL-40EX400/40EX401 ONLY)
5 4-166-864-01 NECK(M3B)
(KDL-32EX301/32EX400 ONLY)
5 4-166-868-01 NECK(ML3B)
(KDL-40EX400/40EX401 ONLY)
2-580-608-01 SCREW, +PSW M5X16
(SCREWS TOATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
51
2
3
4
A
B
Soft Cloth
C

KDL-32EX500/40EX500/40EX501/46EX500/46EX501 12
Components not identified by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts ofan assembly are indicatedby the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
* Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE:Les composantsidentifies per un trameet
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
ARemove 4 screws from Table-Top Stand Assembly
BLift up TV set to detach from Table-Top Stand Assembly
CGently place the TV set face down onto a soft cloth
1 X-2546-644-1 TABLE-TOP STAND ASSEMBLY (L3) [2-6]
(KDL-46EX500/46EX501 ONLY)
2 X-2546-642-1 BASE (M3) ASSEMBLY [3]
(KDL-32EX500 ONLY)
2 X-2546-643-1 BASE (ML3) ASSEMBLY [3]
(KDL-40EX500/40EX501 ONLY)
3 4-166-874-01 COVER,STAND(M3)
(KDL-32EX500 ONLY)
3 4-166-884-01 COVER,STAND(ML3)
(KDL-40EX500/40EX501 ONLY)
3 4-167-476-01 COVER, STAND (L3)
(KDL-46EX500/46EX501 ONLY)
4 4-166-875-01 COVER,NECK(M3 FRONT)
5 4-166-876-01 COVER,NECK(M3 REAR)
6 4-166-872-01 NECK(M3)
(KDL-32EX500 ONLY)
6 4-166-882-01 NECK(ML3)
(KDL-40EX500/40EX501/46EX500/46EX501 ONLY)
7 2-580-608-01 SCREW, +PSW M5X16
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
2-580-608-01 SCREW, +PSW M5X16
5
6
7
1
2
3
4
B
Soft Cloth
C
A
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]

KDL-46EX400/46EX401 12
Components not identified by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts ofan assembly are indicatedby the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
* Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE:Les composantsidentifies per un trameet
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
ARemove 4 screws from Table-Top Stand Assembly
BLift up TV set to detach from Table-Top Stand Assembly
CGently place the TV set face down onto a soft cloth
1 X-2546-641-1 TABLE-TOP STAND ASSEMBLY (L3B) [2-4]
2 4-167-479-01 COVER, STAND (L3B)
3 4-166-871-01 COVER,NECK(ML3B)
4 4-166-868-01 NECK(ML3B)
5 2-580-608-01 SCREW, +PSW M5X16
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
2-580-608-01 SCREW, +PSW M5X16
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
5
1
2
3
4
A
B
Soft Cloth
C

KDL-55EX500/55EX501/60EX500 12
Components not identified by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts ofan assembly are indicatedby the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
* Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE:Les composantsidentifies per un trameet
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
ARemove 4 screws from Table-Top Stand Assembly
BLift up TV set to detach from Table-Top Stand Assembly
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
CGently place the TV set face down onto a soft cloth
B
A
Soft Cloth
C
1 X-2514-983-1 BASE (LL3) ASSEMBLY [2]
(KDL-55EX500/55EX501 ONLY)
1 X-2514-984-1 BASE (LLL3) ASSEMBLY [2]
(KDL-60EX500 ONLY)
2 4-158-387-01 COVER, STAND (LL3)
(KDL-55EX500/55EX501 ONLY)
2 4-158-388-01 COVER, STAND (LLL3)
(KDL-60EX500 ONLY)
3 X-2546-542-1 COVER (LL3) ASSEMBLY [4-5]
(KDL-55EX500/55EX501 ONLY)
4 4-158-397-01 COVER, NECK (LL3 FRONT)
(KDL-55EX500/55EX501 ONLY)
4 4-158-398-01 COVER, NECK (LLL3 FRONT)
(KDL-60EX500 ONLY)
5 4-158-403-01 COVER, NECK (LL3 REAR)
(KDL-55EX500/55EX501 ONLY)
5 4-158-404-01 COVER, NECK (LLL3 REAR)
(KDL-60EX500 ONLY)
6 4-158-351-01 NECK (LL3)
(KDL-55EX500/55EX501 ONLY)
6 4-158-352-01 NECK (LLL3)
(KDL-60EX500 ONLY)
7 2-580-608-01 SCREW, +PSW M5X16
(SCREWS TOATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
2-580-608-01 SCREW, +PSW M5X16
7
6
1
2
4
3
5

KLV-32BX300/40BX400 11
Components not identified by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts ofan assembly are indicatedby the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
* Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE:Les composantsidentifies per un trameet
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
ARemove 4 screws from Table-Top Stand Assembly
BLift up TV set to detach from Table-Top Stand Assembly
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
(Check the Sony Electronics Service Information website for any additional service related issues for this model.)
1 X-2514-986-1 BASE (M3B) ASSEMBLY
(KLV-32BX300 ONLY)
1 X-2546-144-1 BASE (ML3B) ASSEMBLY
(KLV-40BX400 ONLY)
2 4-174-813-01 COVER, NECK (M3B)
(KLV-32BX300 ONLY)
2 4-171-882-01 COVER, NECK (ML3B)
(KLV-40BX400 ONLY)
3 4-174-808-01 NECK (M3B)
(KLV-32BX300 ONLY)
3 4-171-839-01 NECK (ML3B)
(KLV-40BX400 ONLY)
4 2-580-608-01 SCREW, +PSW M5X16
(SCREWS TOATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
2-580-608-01 SCREW, +PSW M5X16
4
1
2
3
A
B
Soft Cloth
C
CGently place the TV set face down onto a soft cloth

KDL-40HX701/46HX701/55HX701 11
Components not identified by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts ofan assembly are indicatedby the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
* Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE:Les composantsidentifies per un trameet
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
ARemove 4 screws from Table-Top Stand Assembly
BLift up TV set to detach from Table-Top Stand Assembly
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
CGently place the TV set face down onto a soft cloth
A
B
(Check the Sony Electronics Service Information website for any additional service related issues for this model.)
Soft Cloth
C
1
4
52
3
1 X-2514-977-1 BASE (ML2) ASSEMBLY
(KDL-40HX701 ONLY)
1 X-2514-978-1 BASE (L2) ASSEMBLY
(KDL-46HX701 ONLY)
1 X-2514-979-1 BASE (LL2) ASSEMBLY
(KDL-55HX701 ONLY)
2 X-2546-547-1 COVER (M3) ASSEMBLY
(KDL-40HX701/46HX701 ONLY)
2 X-2546-552-1 COVER (LL2) ASSEMBLY
(KDL-55HX701 ONLY)
3 X-2546-340-1 NECK (ML2) ASSEMBLY
(KDL-40HX701/46HX701 ONLY)
3 4-158-348-01 NECK (LL2)
(KDL-55HX701 ONLY)
4 4-158-407-01 COVER, EDGE (LL2)
(KDL-55HX701 ONLY
5 2-580-608-01 SCREW, +PSW M5X16
(SCREWS TOATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
2-580-608-01 SCREW, +PSW M5X16

KDL-46NX800/52NX800/60NX800/60NX801 13
Components not identified by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts ofan assembly are indicatedby the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
* Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE:Les composantsidentifies per un trameet
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
Check the Sony Electronics Service Information website for any additional service related issues for this model.)
SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
ALift up Bottom Cover to detach from Rear Cover
BRemove 4 screws from Table-Top Stand Assembly
CLift up TV set to detach from Table-Top Stand Assembly
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
DGently place the TV set face down onto a soft cloth
1 X-2546-092-1 BASE (L1A) ASSEMBLY
(KDL-46NX800 ONLY)
1 X-2546-093-2 BASE (LL1A) ASSEMBLY
(KDL-52NX800 ONLY)
1 X-2546-094-2 BASE (LLL1A) ASSEMBLY
(KDL-60NX800/60NX801 ONLY)
2 4-170-474-01 COVER, NECK (ML1 FRONT)
(KDL-46NX800 ONLY)
2 4-170-475-01 COVER, NECK (LL1 FRONT)
(KDL-52NX800 ONLY)
2 4-170-476-01 COVER, NECK (LLL3A FRONT)
(KDL-60NX800/60NX801 ONLY)
3 4-170-481-01 COVER, NECK (ML1 REAR)
(KDL-46NX800 ONLY)
3 4-170-482-01 COVER, NECK (LL1 REAR)
(KDL-52NX800 ONLY)
3 4-170-483-01 COVER, NECK (LLL1 REAR)
(KDL-60NX800/60NX801 ONLY)
4 4-170-445-01 NECK (ML1)
(KDL-46NX800 ONLY)
4 4-170-446-01 NECK (LL1)
(KDL-52NX800 ONLY)
4 4-170-452-01 NECK (LLL3A)
(KDL-60NX800/60NX801 ONLY)
5 2-580-608-01 SCREW, +PSW M5X16
(SCREWS TOATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
2-580-608-01 SCREW, +PSW M5X16
B
A
C
Soft Cloth
D
1
4
2
3
5

KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703/ 12
52EX700/52EX701/52EX703/60EX700/60EX701/60EX703
Components not identified by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts ofan assembly are indicatedby the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
* Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE:Les composantsidentifies per un trameet
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
ARemove 4 screws from Table-Top Stand
Assembly
BLift up TV set to detach from Table-Top Stand
Assembly
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
(Check the Sony Electronics Service Information website for any additional service related issues for this model.)
1 X-2547-875-1 BASE (M3A) ASSY
(KDL-32EX700 ONLY)
1 X-2547-876-1 BASE (ML3A) ASSY
(KDL-40EX700/40EX703/46EX700/46EX701/46EX703 ONLY)
1 X-2547-877-1 BASE (LL3A) ASSY
(KDL-52EX700/52EX701/52EX703 ONLY)
1 X-2546-099-1 BASE (LLL3A) ASSY
(KDL-60EX700/60EX701/60EX703 ONLY)
2 4-170-477-01 COVER, NECK (M3A FRONT)
(KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703 ONLY)
2 4-170-479-01 COVER, NECK (LL3A FRONT)
(KDL-52EX700/52EX701/52EX703 ONLY)
2 4-170-476-01 COVER, NECK (LLL3A FRONT)
(KDL-60EX700/60EX701/60EX703 ONLY)
3 4-170-485-01 COVER, NECK (M3A REAR)
(KDL-32EX700/40EX700/40EX703/46EX700/46EX701/46EX703 ONLY)
3 4-170-487-01 COVER, NECK (LL3A REAR)
(KDL-52EX700/52EX701/52EX703 ONLY)
3 4-170-488-01 COVER, NECK (LLL3A REAR)
(KDL-60EX700/60EX701/60EX703 ONLY)
4 4-170-449-01 NECK (M3A)
(KDL-32EX700 ONLY)
4 4-170-450-01 NECK (ML3A)
(KDL-40EX700/40EX703/46EX700/46EX701/46EX703 ONLY)
4 4-170-451-01 NECK (LL3A)
(KDL-52EX700/52EX701/52EX703 ONLY)
4 4-170-452-01 NECK (LLL3A)
(KDL-60EX700/60EX701/60EX703 ONLY)
5 2-580-608-01 SCREW, +PSW M5X16
(SCREWS TOATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
1
4
2
3
5
B
A
Soft Cloth
C
CGently place the TV set face down onto a soft cloth
2-580-608-01 SCREW, +PSW M5X16

KDL-40NX700/46NX700 11
Components not identified by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts ofan assembly are indicatedby the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
* Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE:Les composantsidentifies per un trameet
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
(Check the Sony Electronics Service Information website for any additional service related issues for this model.)
SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
ARemove 4 screws from
Table-Top Stand Assembly
BLift up TV set to detach from
Table-Top Stand Assembly
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
CGently place the TV set face down onto a soft cloth
1 X-2546-759-1 BASE (L1) ASSEMBLY (GM)
(KDL-46NX700 ONLY))
1 X-2546-758-1 BASE (ML1) ASSEMBLY (GM)
(KDL-40NX700 ONLY))
2 4-170-474-21 COVER, NECK (ML1 FRONT)
3 4-170-481-21 COVER, NECK (ML1 REAR)
4 4-170-445-01 NECK (ML1)
5 2-580-608-01 SCREW, +PSW M5X16
(SCREWS TOATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
2-580-608-01 SCREW, +PSW M5X16
B
A
Soft Cloth
C
1
4
2
3
5

KDL-22EX308/32EX308 11
Components not identified by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts ofan assembly are indicatedby the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
* Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE:Les composantsidentifies per un trameet
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
A
Remove screws from Table-Top Stand Assembly
3 from KDL-22EX308 ONLY
4 from KDL-32EX308 ONLY
B
Lift up TV set to detach from Table-Top Stand Assembly
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
C
Gently place the TV set face down onto a soft cloth
(Check the Sony Electronics Service Information website for any additional service related issues for this model.)
1 X-2514-989-1 BASE (S3B) ASSY
(KDL-22EX308 ONLY)
1 X-2514-986-1 BASE (M3B) ASSY
(KDL-32EX308 ONLY)
2 4-158-399-01 COVER, NECK (S3B)
(KDL-22EX308 ONLY)
2 4-174-813-01 COVER, NECK (M3B)
(KDL-32EX308 ONLY)
3 4-158-353-01 NECK (S3B)
(KDL-22EX308 ONLY)
3 4-174-808-01 NECK (M3B)
(KDL-32EX308 ONLY)
4 2-580-608-01 SCREW, +PSW M5X16
(SCREWS TOATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
2-580-608-01 SCREW, +PSW M5X16
A
B
Soft Cloth
C
4
1
2
3

KDL-22BX300/32BX300 11
Components not identified by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts ofan assembly are indicatedby the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
* Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE:Les composantsidentifies per un trameet
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
(Check the Sony Electronics Service Information website for any additional service related issues for this model.)
1 X-2547-393-1 BASE (S3B) ASSEMBLY
(KDL-22BX300 ONLY)
1 X-2547-390-1 BASE (M3B) ASSEMBLY
(KDL-32BX300 ONLY)
2 4-166-863-01 COVER,NECK(S3B)
(KDL-22BX300 ONLY)
2 4-175-850-01 COVER, NECK (M3B)
(KDL-32BX300 ONLY)
3 4-166-860-01 NECK(S5)
(KDL-22BX300 ONLY)
3 4-175-852-01 NECK(M3B)
(KDL-32BX300 ONLY)
4 4-159-298-01 SCREW, +PSW M4X10
(SCREWS TO ATTACH NECK TO BASE ASSEMBLY)
5 2-580-608-01 SCREW, +PSW M5X16
(SCREWS TOATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
2-580-608-01 SCREW, +PSW M5X16
A
Remove screws from Table-Top Stand Assembly
3 from KDL-22BX300 ONLY
4 from KDL-32BX300 ONLY
B
Lift up TV set to detach from Table-Top Stand Assembly
A
B
C
Gently place the TV set face down onto a soft cloth
Soft Cloth
C
1
2
3
5
4

KDL-32EX600/40EX600/46EX600 11
Components not identied by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts of an assembly are indicated by the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
* Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE: Les composants identies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specie.
NOTE: The components identied by shading
and
!
mark are critical for safety. Replace only
with part number specied.
NOTE: The components identied by a red outline and a mark contain
condential information. Specic instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
ARemove 4 screws from Table-Top Stand Assembly
BLift up TV set to detach from Table-Top Stand Assembly
CGently place the TV set face down onto a soft cloth
1 X-2548-131-1 TABLE-TOP STAND ASSEMBLY (L3C) [2-6]
(KDL-46EX600 ONLY)
2 X-2548-130-1 BASE (M3A) ASSEMBLY [3]
(KDL-32EX600/40EX600 ONLY)
3 4-179-849-01 COVER, STAND (M3A)
(KDL-32EX600/40EX600 ONLY)
3 4-179-850-01 COVER, STAND (L3C)
(KDL-46EX600 ONLY)
4 4-179-851-01 COVER, NECK (M3A FRONT)
5 4-179-852-01 COVER, NECK (M3A REAR)
6 4-179-853-01 NECK (M3A)
(KDL-32EX600 ONLY)
6 4-179-854-01 NECK (ML3A)
(KDL-40EX600/46EX600 ONLY)
7 2-580-608-01 SCREW, +PSW M5X16
(SCREWS TOATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
2-580-608-01 SCREW, +PSW M5X16
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
B
A
Soft Cloth
C
1
3
2
6
4
5
7

KDL-32EX40B/40EX40B 13
Components not identified by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts ofan assembly are indicatedby the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
* Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE:Les composantsidentifies per un trameet
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
ARemove 4 screws from Table-Top Stand Assembly
BLift up TV set to detach from Table-Top Stand Assembly
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
CGently place the TV set face down onto a soft cloth
(Check the Sony Electronics Service Information website for any additional service related issues for this model.)
1 X-2514-980-1 BASE (M3) ASSEMBLY
(KDL-32EX40B ONLY)
1 X-2514-982-1 BASE (L3) ASSEMBLY
(KDL-40EX40B ONLY)
2 X-2546-540-1 COVER (M3) ASSEMBLY
3 4-158-349-01 NECK (M3)
(KDL-32EX40B ONLY)
3 4-158-350-01 NECK (ML3)
(KDL-40EX40B ONLY)
4 2-580-608-01 SCREW, +PSW M5X16
(SCREWS TOATTACH NECK TO BASE)
5 2-580-608-01 SCREW, +PSW M5X16
(SCREWS TOATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
2-580-608-01 SCREW, +PSW M5X16
2
1
3
4
5
B
A
Soft Cloth
C

XBR-46HX909/52HX909 13
Components not identified by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts ofan assembly are indicatedby the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
* Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE:Les composantsidentifies per un trameet
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
ARemove 4 screws from Table-Top Stand Assembly
BLift up TV set to detach from Table-Top Stand Assembly
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
CGently place the TV set face down onto a soft cloth
(Check the Sony Electronics Service Information website for any additional service related issues for this model.)
1 X-2546-760-2 BASE (LL1) ASSEMBLY (GM)
2 4-170-475-21 COVER, NECK (LL1 FRONT)
3 4-170-484-21 COVER, NECK (LL1B REAR)
4 4-170-448-01 NECK (LL1B)
5 2-580-608-01 SCREW, +PSW M5X16
(SCREWS TOATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
2-580-608-01 SCREW, +PSW M5X16
1
4
2
3
5
B
A
Soft Cloth
C

KDL-40HX800/46HX800/55HX800 13
Components not identified by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts ofan assembly are indicatedby the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
* Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE:Les composantsidentifies per un trameet
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specifie.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
ARemove 4 screws from Table-Top Stand Assembly
BLift up TV set to detach from Table-Top Stand Assembly
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
CGently place the TV set face down onto a soft cloth
(Check the Sony Electronics Service Information website for any additional service related issues for this model.)
1 X-2547-875-1 BASE (M3A) ASSEMBLY
(KDL-40HX800 ONLY)
1 X-2547-878-1 BASE (L3C) ASSEMBLY
(KDL-46HX800 ONLY)
1 X-2547-877-1 BASE (LL3A) ASSEMBLY
(KDL-55HX800 ONLY)
2 4-170-477-01 COVER, NECK (M3A FRONT)
(KDL-40HX800/46HX800 ONLY)
2 4-187-664-01 COVER, NECK (LL3A FRONT)
(KDL-55HX800 ONLY)
3 4-170-485-01 COVER, NECK (M3A REAR)
(KDL-40HX800/46HX800 ONLY)
3 4-187-665-01 COVER, NECK (LL3A REAR)
(KDL-55HX800 ONLY)
4 4-170-450-01 NECK (ML3A)
(KDL-40HX800/46HX800 ONLY)
4 4-170-451-01 NECK (LL3A)
(KDL-55HX800 ONLY)
5 2-580-608-01 SCREW, +PSW M5X16
(SCREWS TOATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
2-580-608-01 SCREW, +PSW M5X16
1
4
2
3
5
B
A
Soft Cloth
C

XBR-40LX900/46LX900/52LX900/60LX900 13
Components not identied by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts of an assembly are indicated by the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
* Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE: Les composants identies per un trame et
une marque
!
sont critiques pour la securite.
Ne les remplacer que par une piece portant le
numero specie.
NOTE: The components identied by shading
and
!
mark are critical for safety. Replace only
with part number specied.
NOTE: The components identied by a red outline and a mark contain
condential information. Specic instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
Check the Sony Electronics Service Information website for any additional service related issues for this model.)
SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
ARemove 4 screws from Table-Top Stand Assembly
BLift up TV set to detach from Table-Top Stand Assembly
REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES] REF. NO. PART NO. DESCRIPTION [ASSEMBLY INCLUDES]
CGently place the TV set face down onto a soft cloth
1 X-2546-087-1 BASE (ML1) ASSEMBLY
(XBR-40LX900 ONLY)
1 X-2546-088-1 BASE (L1) ASSEMBLY
(XBR-46LX900 ONLY)
1 X-2546-089-2 BASE (LL1) ASSEMBLY
(XBR-52LX900 ONLY)
1 X-2546-090-3 BASE (LLL1) ASSEMBLY
(XBR-60LX900 ONLY)
2 4-170-474-01 COVER, NECK (ML1 FRONT)
(XBR-40LX900/46LX900 ONLY)
2 4-170-475-01 COVER, NECK (LL1 FRONT)
(XBR-52LX900 ONLY)
2 4-170-476-01 COVER, NECK (LLL3A FRONT)
(XBR-60LX900 ONLY)
3 4-170-481-01 COVER, NECK (ML1 REAR)
(XBR-40LX900/46LX900 ONLY)
3 4-170-482-01 COVER, NECK (LL1 REAR)
(XBR-52LX900 ONLY)
3 4-170-488-01 COVER, NECK (LLL3A REAR)
(XBR-60LX900 ONLY)
4 4-170-446-01 NECK (LL1)
(XBR-52LX900 ONLY)
4 4-170-452-01 NECK (LLL3A)
(XBR-60LX900 ONLY)
4 4-170-445-01 NECK (ML1)
(XBR-40LX900/46LX900 ONLY)
5 2-580-608-01 SCREW, +PSW M5X16
(SCREWS TOATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
2-580-608-01 SCREW, +PSW M5X16
B
A
Soft Cloth
C
1
4
2
3
5