Sony NXL-IP55 User manual

NXL-IP55
IP Live Production Unit
Sony proudly introduces a powerful IT solution for HD live production with the NXL-IP55 IP Live Production Unit,
designed to alleviate the cumbersome task of arranging several cables between two locations.
For use in multiple-camera live productions, the NXL-IP55 allows you to transmit up to four video streams (three
downstream and one upstream, or two downstream and two upstream) in less than one field delay time, even
over a local area network (LAN)*.
Along with video and audio signals, the NXL-IP55 transmits all essential signals such as tally, GPIO, intercom and
even genlock signals through a single LAN cable (available separately). In this way, the NXL-IP55 achieves a
never-seen-before IP live production system that provides far greater flexibility for professional live operation.
Next-generation IP Network Technology Ushers In
a New Era of Live Multi-camera Production
* Please contact Sony for the required network connection.

Sony is taking live production into a new era with the all-new NXL-IP55.
Broadcast Quality
The NXL-IP55 utilizes unique technologies to transmit broadcast-quality multi-channel video and
audio via 1-Gbps link with very low latency of less than one field (1/2 frame)* of video signals.
* Depending on network connection.
Mutiple Inputs & Outputs
This new system can handle up to four HD-SDI video sources (three downstream and one
upstream, or two downstream and two upstream) with a maximum of 10 (eight upstream, two
downstream) audio channels, including intercom. In addition to these fundamental signals,
the NXL-IP55 also transports tally and GPIO (General Purpose Input and Output) signals on the
same link. The NXL-IP55 has a genlock function as well, which allows all of the video sources to
be synchronized over an IP network.
Flexibility
By utilizing standard IP technology, the remote production environment can be drastically
simplified compared to a conventional system with coaxial cables. Another advantage of using
IP technology is flexibility. The NXL-IP55 can transmit all signals over a LAN infrastructure, enabling
signals to be transmitted miles away*. Also, the compact design of the NXL-IP55 helps you to
take live production capabilities everywhere you need.
* Please contact Sony for details.
The NXL-IP55 provides powerful functions to simplify your production.
Simulated image
Live Production Made Simple with
Widely Used IP Technology

Available signals:
- Up to four HD-SDI channels (three downstream and one upstream, or two downstream and two upstream signals)
- Up to ten channels of audio + intercom (up to eight upstream signals)
- Tally signal: three red tally signals and three green signals; direction of transition can be selected by color
- GPIO: eight channels; direction of transition can be selected by each four-channel
KEY FEATURES
Configuration Example: 3+1 Mode
*1 Please contact Sony for details on compatible remote camera controllers, which are available separately.
*2 An optical fiber cable can be used for long-distance transmission when Ethernet switches are configured in the system.
Remote Camera Control*1
NXL-IP55
(Transmitter Side)
REF OUT
HD-SDI IN 1
REF OUT
HD-SDI IN 2
REF OUT
HD-SDI IN 3
HD-SDI OUT 1
MAIN
BRC-H900
VPL-FH500L
MCS-8M
Ethernet*2
Return
Ethernet Switch*2
NXL-IP55
(Receiver Side)
HD-SDI OUT 1
HD-SDI OUT 2
HD-SDI OUT 3
REF IN
HD-SDI IN 1
MAIN
Return
REF IN
Ethernet Switch*2
RM-IP10 Remote
Camera Controller*1
BRC-H900
BRC-H900
Remote Cameras Switcher
Master Reference Signal
Configuration Example: Combination with HDC-2000 Series’ Network Trunk function
*3 Network Trunk is a function of HDC/HDCU-2000 Series to transmit up to 1 Gbps IP data between a camera and a CCU.
NXL-IP55
(Transmitter Side)
MAIN
MVS-6500 Series
Ethernet
Ethernet Network Trunk function*3
3G Optical Fiber Camera Cable
Ethernet Switch
NXL-IP55
(Receiver Side)
HD-SDI OUT 1
HD-SDI OUT 2
HD-SDI OUT 3
MAIN
SDI
Ethernet Switch
HDC-2000 Series HDCU-2000/2500
REF OUT
HD-SDI IN 1
REF OUT
HD-SDI IN 2
REF OUT
HD-SDI IN 3
HDC-P1
Remote Cameras
Switcher
*3
REF IN REF IN
Master Reference Signal
HDC-P1
HDC-P1
MSU-1500 RCP-1500

©2012 Sony Corporation. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Features, design, and specications are subject to change without notice.
The values for weight and dimension are approximate.
“SONY” and “make.believe” are trademarks of Sony Corporation.
All other trademarks are the trademarks of their respective owners.
The NXL-IP55 is produced at Sony EMCS
Corporation’s Tokai Technology Center, which
has received ISO14001, the Environmental
Management System certication.
SPECIFICATIONS
Rear panel
Front panel
NXL-IP55
General
Power requirements DC 19.5 V / 2.2 A
Operating temperature 41°F to 104°F (5°C to 40°C)
Storage temperature -4°F to +140°F (-20°C to +60°C)
Dimensions (W x H x D) 8 2/5x 1 3/5x 12 1/3inches (214 x 42.2 x 313 mm, 1U rack-mount size)
Weight 5 lb 8.2 oz (2.5 kg)
Supporting format 1920 x 1080/59.94i, 50i, 1280 x 720/59.94p, 50p
Input / Output
Reference input
BNC (x1)
HD:Tri-level sync, 0.6 Vp-p, 75Ω
SD: Sync (NTSC: 0.286 Vp-p, 75Ω / PAL: 0.3 Vp-p, 75Ω)
HD-SDI input BNC (x3)
SMPTE 292M
Reference output
BNC (x3)
HD:Tri-level sync, 0.6 Vp-p, 75Ω
SD: Sync (NTSC: 0.286 Vp-p, 75Ω / PAL: 0.3 Vp-p, 75Ω)
HD-SDI output BNC (x5)
SMPTE 292M
Audio / Intercom
D-sub 25-pin (x1)
Audio:Line level, Max. 6ch Input or Output
Intercom:4 W or 2 W
Tally / GPIO
D-sub 25-pin (x1)
Tally: Red x 3 and Green x 3,12 V or contact
GPIO: 8ch (Tx or Rx at each 4ch)
Main RJ-45 (x1)
1000BASE-T for signal transmission
Control RJ-45 (x1)
10Base-T /100Base-TX for setup and control of the NXL-IP55
DC input 19.5 V
Supplied accessories
Operating Instructions,Power Plug Clamp,AC Adaptor
HD-SDI Output (Monitor)Reference Input
HD-SDI OutputHD-SDI InputReference Output
Audio / Intercom MAIN Control DC Input 19.5VTally / GPIO
Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
sony.com/professional
V-2550 (MK10969V1) Printed in USA (12/12)