Sony Super HAD CCDII User manual

Thank you for purchasing our product.
Please read this User’s Manual before
using the product. Change without Notice
WDR Tube Camera
User’s manual
SONY Super HAD CCDⅡ

2
Specification
Model typeA typeB
Pick up device 1/3" double-density CCD
Total Pixels NTSC:1028(H) x 508(V) / PAL:1028(H) x 596(V)
Effective Pixels NTSC:976 (H) x 494(V) / PAL:976 (H) x 582(V)
Resolution 700 TV lines
Synchronizing System 2:1 Internal
Scanning System NTSC: 525Lines/60Fields;PAL:625Lines/50Fields
S/N Ratio More than 52dB (AGC OFF, Weight on)
Electronic Shutter Auto 1 / 60 (1/50) ~1/100,000 sec
Min. Illumination 0.1Lux@ F1.0, Sense-up:
[email protected]
0.1Lux@ F1.6, Sense-up:
[email protected]
Video Output 1.0 Vp-p / 75 ohm
IR Distance 50M (36pcs IR LED : 18pcs Piranha / 18pcs Reflection)
IR Trigger 3.1lux / 3.7lux IR On / Off
WDR Function ON / OFF
AGC Auto
BLC WDR / BLC / OFF
White Balance Auto / Manual / Outdoor / Indoor / CRS
Lens Type Varifocal Lens: 6 ~ 50 mm / F1.6
IR Cut Auto
OSD Control Button / Control keyboard / Remote controller
1.SONY WDR (Wide Dynamic Range) Total Solution.
2.700 TV Lines High Resolution.
[email protected]; Sense-up: 0.001Lux@F1.0.
4.OSD Control by Button / Keyboard / Remote Controller.
5.RS485 Interface OSD Control by Pelco-D, Pelco-P.
6.Ideal for Backlight Environments.
7.2D/3D Noise Reduction & Sense Up (512x) Functions.
8.Shutter Mode (SCHEDULE / DAY&NIGHT).
9.Face Detection of up to 4 faces.
10.Privacy Mask 8 Zones Programmable.
11.Advanced Motion Detection Function.
12.Auto Zoom by face tracking or motion detection
13.Picture-Effect : Mirror / Flip / E-Zoom 1~16x.
14.Alarm relay out : NO + COM / NC + COM.

3
Face Detection 4 Face Detection
Motion Detection ON / OFF (24x16 Zones)
Picture-Effect Mirror / Flip / E-Zoom 1~16x
Auto-Zoom Optional Under auto face tracking or motion detection
Alarm relay out NO + COM / NC + COM
Privacy ON / OFF (8 Zones Programmable, Mosaic)
RS485 Protocol Pelco-D, Pelco-P
Power Source DC12V; DC12/AC24V DC12V; DC12/AC24V; AC110V~240V
Power Consumption
Standard :
DC12V ±10% / 1.5 A
Optional :
DC12V ±10% / 1.5 A ;
AC24V±10% / 1.5 A
Standard :
DC12V ±10% / 1.5 A / AC 24V
Optional :
DC12V ±10% / 1.5 A ; AC 110V~240V
Current 1.5A (Max)
Operating Temperature -10℃~ 50℃(14℉~ 122℉)
Storage Temperature -20℃~ 70℃(-4℉~ 158 ℉)
Dimension 100(W) x 203(H) x 222(D)mm 100(W) x 203(H) x 167(D)mm
Weight N.W./G.W.: 1.74kg / 2.15kg N.W./G.W.: 1.4kg / 1.85kg
Weatherproof IP67
Dimension
BEFORE ATTEMPTING TO HOOK UP AND OPERATE, PLEASE READ THIS
MANUAL.
CAUTIONS
(1) To reduce the risk of electric shock, do not remove cover(or back). No user
serviceable parts inside. Refer servicing to qualified service personnel.
(2) Never point the camera toward the sun and do not expose the lens directly
to sun or strong light as this may damage the pick-up device.
(3) Handle this camera with care. Avoid any shock or impact to the camera as
it contains sensitive parts which can be damaged by improper handling.
(4) Requires a proper operating environment this camera is designed for
indoor use. This allowable temperature range for operation of this camera
is between 14℉to 122℉and the allowable humidity is 85% maximum. If
the camera is to be placed in an extremely dusty location, a special
housing may be necessary to protect the camera and lens.
Please use suitable adapter DC12V ± 10 %,1A. Otherwise, this product will be damaged.

4
DIP Switcher
OSD MENU
Main Menu Tree
Main Menu
General
AE
WB MODE
D/N MODE
Face / Motion
Mask Setup
Reset Camera
EXIT & SAVE
1. N/A
2. DN, day and night. On(auto)/off(day)
3. N/A
4. Reflection LED on/off switch
5. Piranha LED high/low power switch
6. Reflection LED high/low power switch
7. LED light

5
General
RS485 ID 1 ~ 254
Baud Rate 4800 9600
14400
Flip/Mirror
OFF
FLIP
MIRROR
ROTATE180
DNR 2D-NR ON
OFF
3D-NR ON
OFF
PTZ SPEED 1 ~ 15
RETURN
EXIT & SAVE
RS485 ID and baud rate depends on keyboard. Camera’s protocol Pelco P and D are embedded.
Image effect: Flip / Mirror / Rotate180
DNR (Digital noise reduce)
The image performance would be improved when the DNR mode on.
PTZ Speed, auto zoom speed under face or motion detect mode
Camera Keyboard
RS485

6
AE
WDR/BLC Set
OFF DC LEVEL 80 ~ 240
SHUTTER 1/60~1/10000(PAL 1/50)
WDR WDR LEVEL L 50 ~ 250 WDR LEVEL S 10 ~ 250
L/S POINT 200 ~ 1200
BLC AUTO DC LEVEL 80 ~ 240
SHUTTER 1/60~1/10000(PAL 1/50)
BLC FIX
BLC Level 0 ~ 31
BLC Window
CENTER_LEFT
CENTER
CENTER_RIGHT
BOT_LEFT
BOT_CENTER
BOT_RIGHT
TOP_LEFT
TOP_CENTER
TOP_RIGHT
DC LEVEL 80 ~ 240
SHUTTER 1/60~1/10000(PAL 1/50)
DSS MAX OFF,1~20,40,60,80,100,200
AGC MAX 80 ~ 120
FLICKER ON
OFF
RETURN
EXIT & SAVE

7
WBMODE
User can adjust white balance effect, the function like asAuto Tracking White balance (ATW), Auto
White Balance adjust (AWB), Indoor or outdoor environment.
AUTO
Manual R Gain -5 ~ 5
B Gain -5 ~ 5
RETURN
EXIT & SAVE
Outdoor
Indoor
CRS
D/NMODE
EXT DELAY 1 ~ 10
RETURN
EXIT & SAVE

8
Face/Motion
DETECT
MODE
AUTO FACE FACE MODE SINGLE FACE(only one face zoom)
MULTI FACE(balance all face zoom)
RETURN
EXIT & SAVE
BY LABEL
LABEL1~4 SETUP
FACE
LABEL FRAME ON
OFF
LABEL COLOR
Red
Green
Blue
Pink
Yello
w
Cyan
Coffee
White
H Start 0 ~ 23
H End 0 ~ 23
V Start 0 ~ 15
V End 0 ~ 15
RETURN
EXIT & SAVE
Motion
LABEL FRAME ON
OFF
LABEL COLOR
Red
Green
Blue
Pink
Yello
w
Cyan
Coffee
White
H Start 0 ~ 23
H End 0 ~ 23
V Start 0 ~ 15
V End 0 ~ 15
RETURN
EXIT & SAVE
DISABLE
FR. AUTO OFF ON(frame window auto hide)
OFF(frame window off)
HOLD DELAY 1 ~ 5
RETURN
EXIT & SAVE
DISABLE
AUTO ZOOM ON
OFF
SENSITIVITY
MD THRESHOLD 0 ~ 20
FD THRESHOLD 0 ~ 40
RETURN
EXIT & SAVE
ALARM SETUP
MD ALARM ON
OFF
MD ALARM SET NORMAL OPEN
NORMAL CLOSE
FD ALARM ON
OFF
FD ALARM SET NORMAL OPEN
NORMAL CLOSE
NIGHT COLOR ON
OFF
RETURN
EXIT & SAVE
RETURN
EXIT & SAVE

9
Special Features
Detect mode:
Auto face:
There are two choices available:
-Single face which means just one frame will appear and the camera will track the face
within his field of view
-Multi face which means it can track up to 4 different face in the same windows
If auto zoom is enabled, it will make a digital zoom on the face
By label
User select an area and draw a frame which will be the detect label area 1 or maximum 4
area. Each label owns single detect mode, face or motion. Motion and face detect only
available on frame window of lens view.
Sensitivity
Motion or face threshold. Lower figure means detection is more sensitive.
Alarm setup
To active alarm relay when face or motion is detected. Can be set to normally open or
normally close. Example it can be connected to a buzzer or light for immediate action

10
Mask Setup
Mask1 ~ 8
MASK ON
OFF
Color Red
Green
Blue
Pink
Yellow
Cyan
Coffee
White
H START 0 ~ 500
H END 0 ~ 500
V START 0 ~ 280
V END 0 ~ 280
RETURN
EXIT & SAVE
Reset Camera
Back to factory default.
EXIT
Menu Quit.

11
Face/Motion reference setting form
DETECT
MODE DISABLE
A
UTO FACE BY LABEL
A
UTO
ZOOM ON/OFF OFF ON OFF ON
Will
automati
cally
ZOOM
IN
Will automaticall
y
ZOOM IN
FR. AUTO
OFF
(frame
window
auto off)
No option No
option No option OFF ON OFF ON
The LABEL
frame
setting
display
frame
A
fter quit OSD it
automatically
hides all frame
(if available)
The LABEL
frame setting
display frame
A
fter quit OSD it
automatically
hides all frame
(if available)
A
dditional
notice Disable FACE/
MOTION
feature
Internal
frame
display
Internal
cover
frame
Manual
frame
setting by
user can’t
be hidden
A
fter entered
OSD Menu if
enter in BY
LABEL menu
page will
automatically
open frame,
helping user
confirm location
Manual frame
setting by user
can’t be hidden
A
fter entered
OSD Menu if
enter in BY
LABEL menu
page will
automatically
open frame,
helping user
confirm location

12
Detect flow
EXIT OSD (SAVE) and start to detect END
Detect mode
Detect action
Detect area only
BY LABEL
Detect area frame window
PS. face and motion detect
DISABLE
AUTO FACE
Only face detect
Auto zoom
Enlarge
AUTO ZOOM : OFF
Auto zoom
Enlarge
AUTO ZOOM : ON
AUTO ZOOM : OFF
frame window display
AUTO ZOOM : ON
No frame window display
N
Y
START
N
Y
N
Y N
Y
Frame window
auto hide
Y
N
EXIT OSD (SAVE) and start to detect
FR. AUTO OFF：OFF
FR. AUTO OFF：ON
LABEL detect mode, position, color
Y
N

13
Optional with power box
Power Box Pin defines:
Pin
1. power+
2. power -
3. face + (RS485+)
4. face - (RS485-)
5. alarm + (Audio+)
6. alarm - (Audio-)
7. video +
8. video -
85-CT7W11-A002G-A