Sony BKSR-2020 User manual

SDI MPEG ENCODER BOARD
BKSR-2020
ANALOG MPEG ENCODER BOARD
BKSR-2021
MPEG HD ENCODER BOARD
BKSR-2025
SDI MPEG DECODER BOARD
BKSR-2030
ANALOG MPEG DECODER BOARD
BKSR-2031
MPEG HD DECODER BOARD
BKSR-2035
•ご使用にあたっては、マルチアクセスビデオ &オーディオサー
バーVSR-2000/2000Aに付属の取扱説明書の「安全のために」
をよくお読みください。
•ボードやディスクユニットを誤って装着すると、火災・感電やその
他の事故により、けがをしたり周辺の物品に損害を与えたりする
ことがあります。危険を避けるため、装着はサービストレーニング
を受けた技術者にご依頼ください。
本機を装着する技術者へ
装着のしかたについては、BKSR-2021/2025/2030/2035/2070/
U2000はそれぞれに付属の「インストレーションマニュアル」を、その
他の機種はVSR-2000
/2000A に付属の「インストレーションマニュア
ル」をご覧ください。
3-867-801-06(1)
取扱説明書
Operating Instructions
 1999 Sony Corporation rinted in Japan
概要
これらの製品は、マルチアクセスビデオ&オーディオサーバー
VSR-2000/2000A用のオプション基板、HDDユニット、アップグ
レードキット、およびラックマウントキットです
（BKSR-2070、BKSR-
U2000はVSR-2000専用、BKSR-2025、BKSR-2035、BKSH-272Gは
VSR-2000A専用です）。
◆VSR-2000/2000Aに付属の「取扱説明書」を併せてご覧ください。
注意 (BKSR-2020/2021/2025/2030/2031/2035/2070)
この装置は、情報処理装置等電波障害自主規制協議会（VCCI）の
基準に基づくクラスA情報技術装置です。この装置を家庭環境で使
用すると電波妨害を引き起こすことがあります。この場合には使用
者が適切な対策を講ずるよう要求されることがあります。
100BASE-T INTERFACE BOARD
BKSR-2070
UPGRADE KIT
BKSR-U2000
36GB HDD UNIT
BKSH-236G
73GB HDD UNIT
BKSH-272G
RACK MOUNT KIT
RMM-2000

For the customers in the USA (BKSR-2020/2021/2025/
2030/2031/2035/2070)
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to art 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority
to operate this equipment.
The shielded interface cable recommended in this manual
must be used with this equipment in order to comply with the
limits for a digital device pursuant to Subpart B of art 15 of
FCC Rules.
This Class A digital device complies with art 15 of the FCC
Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Precautions
If these products are installed incorrectly, personal
injury or damage to peripheral items may occur due to
fire, shock, or other accidental circumstances. To
avoid such risks, installation should be performed by
trained service technicians.
To technician installing the boards/units
For the BKSR-2021/2025/2030/2035/2070/
U2000 ,
please refer to the installation manual supplied with
that model for installation instructions. For other
models, please refer to the installation manual of the
VSR-2000/2000A Multi Access Video and Audio
Server.
Introduction
These products are optional boards, upgrade kit, hard
disk units, upgrade kit and rack mount kit designed for
the VSR-2000/2000A Multi Access Video and Audio
Server. (The BKSR-2070 and BKSR-U2000 are
exclusive for the VSR-2000, and the BKSR-2025,
BKSR-2035, and BKSH-272G are exclusive for the
VSR-2000A.)
Please refer to the operating insturctions supplied with the VSR-
2000/2000A for your assistance.
For customers in Canada
This Class A digital apparatus complies with Canadian ICES-
003.
Pour les utilisateurs au Canada
Cet appareil numérique de la classe A est conforme à la
norme NMB-003 du Canada.
For the customers in Europe (BKSR-2020/2021/2025/
2030/2031/2035/2070/U2000, BKSH-236G/272G)
This product with the CE marking complies with the EMC
Directive (89/336/EEC) issued by the Commission of the
European Community.
Compliance with this directive implies conformity to the
following European standards:
• EN55103-1: Electromagnetic Interference (Emission)
• EN55103-2: Electromagnetic Susceptibility (Immunity)
This product is intended for use in the following
Electromagnetic Environment(s):
E1 (residential), E2 (commercial and light industrial),
E3 (urban outdoors) and E4 (controlled EMC environment,
ex. TV studio).
Pour les clients européens (BKSR-2020/2021/2025/2030/
2031/2035/2070/U2000, BKSH-236G/272G)
Ce produit portant la marque CE est conforme à la Directive
sur la compatibilité électromagnétique (EMC) (89/336/CEE)
émise par la Commission de la Communauté Européenne.
La conformité à cette directive implique la conformité aux
normes européennes suivantes:
• EN55103-1: Interférences électromagnétiques (émission)
• EN55103-2: Sensibilité électromagnétique (immunité)
Ce produit est prévu pour être utilisé dans les
environnements électromagnétiques suivants:
E1 (résidentiel), E2 (commercial et industrie légère),
E3 (urbain extérieur) et E4 (environnement EMC contrôlé,
ex. studio de télévision).
Für Kunden in Europa (BKSR-2020/2021/2025/2030/2031/
2035/2070/U2000, BKSH-236G/272G)
Dieses rodukt besitzt die CE-Kennzeichnung und erfüllt die
EMV-Direktive (89/336/EEC) der EG-Kommission.
Die Erfüllung dieser Direktive bedeutet Konformität für die
folgenden Europäischen Normen:
• EN55103-1: Elektromagnetische Interferenz (Emission)
• EN55103-2: Elektromagnetische Empfindlichkeit
(Immunität)
Dieses rodukt ist für den Einsatz unter folgenden
elektromagnetischen Bedingungen ausgelegt:
E1 (Wohnbereich), E2 (kommerzieller und in beschränktem
Maße industrieller Bereich), E3 (Stadtbereich im Freien) und
E4 (kontrollierter EMV-Bereich, z.B. Fernsehstudio).