Sony SRS-XB2 User manual
English Personal Audio System
Before operating the system, please read this guide thoroughly and retain it for future reference.
WARNING
To reduce the risk of fire or electric shock, do not expose the USB AC adaptor to rain or
moisture.
To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers,
tablecloths, curtains, etc.
Do not expose the appliance to naked flame sources (for example, lighted candles).
To reduce the risk of fire or electric shock, do not expose the USB AC adaptor to dripping or
splashing, and do not place objects filled with liquids, such as vases, on the USB AC adaptor.
Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.
Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine,
fire or the like for a long time.
As the main plug of the USB AC adaptor is used to disconnect the USB AC adaptor from the mains,
connect it to an easily accessible AC outlet. Should you notice an abnormality in it, disconnect it
from AC outlet immediately.
The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall
outlet, even if the unit itself has been turned off.
If your skin touches the USB AC adaptor or this product for a long time when the power is on, it may
cause a low temperature injury.
Precautions
Note when using with a mobile phone
For details on operation of your mobile phone when receiving a telephone call while transmitting
the sound using the BLUETOOTH connection, refer to the operating instructions supplied with the
mobile phone.
On safety
The nameplate and important information concerning safety are located on the bottom exterior
of the main unit and on the surface of the USB AC adaptor.
Before operating the system, be sure that the operating voltage of the system is identical with
that of your local power supply.
Where purchased Operating voltage
All countries/regions 100 V – 240 V AC, 50 Hz/60 Hz
Notes on the USB AC adaptor
When connecting or disconnecting the USB AC adaptor, turn off the system beforehand.
Otherwise, it may cause malfunction.
Use only the supplied USB AC adaptor and micro-USB cable. To avoid damaging the system, do
not use any other USB AC adaptor.
Polarity of the USB port of the USB AC adaptor
Plug the USB AC adaptor into a nearby wall outlet (mains). In the case of a problem, unplug it
from the wall outlet (mains) immediately.
Do not install the USB AC adaptor in a confined space, such as a bookcase or built-in cabinet.
To reduce the risk of fire or electric shock, do not expose the USB AC adaptor to dripping or
splashing, and do not place objects filled with liquids, such as vases, on the USB AC adaptor.
On placement
Do not set the speaker in an inclined position.
Do not leave the system in a location near heat sources, or in a place subject to direct sunlight,
excessive dust, moisture, rain or mechanical shock.
On operation
Do not insert any small objects, etc. into the jacks or ventilation hole on the rear of the system.
The system may short out or malfunction.
On cleaning
Do not use alcohol, benzine, or thinner to clean the cabinet.
Others
Two units are required when using the Speaker Add function. Only the SBC codec is supported
while using the Speaker Add function.
If you have any questions or problems concerning this system that are not covered in this
manual, please consult your nearest Sony dealer.
On Copyrights
LDAC™ and LDAC logo are trademarks of Sony Corporation.
The BLUETOOTH® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such
marks by Sony Corporation is under license.
The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in
other countries.
Other trademarks and trade names are those of their respective owners.
Notes on water resistant feature
(Read before using the system)
Water resistant performance of the system
This system has a water resistant specification*1,*2of IPX5*3as specified in “Degrees of protection
against ingress of water” of the IEC60529 “Ingress Protection Rating (IP Code).” However, this
system is not completely water-tight.
Do not drop the system into hot water in a bathtub or purposely use it in water. Depending on
usage, water entering the system may cause fire, electric shock or malfunction.
Use the system with full understanding of the following.
Liquids that the water resistant performance specifications apply to
Applicable : fresh water, tap water, sweat
Not applicable : liquids other than the above (soapy water, water with
detergent or bath agents, shampoo, hot spring water, hot
water, pool water, seawater, etc.)
*1Requires that the cap is fastened securely.
*2The supplied accessories are not water resistant.
*3IPX5 (Degree of protection against jets of water): The system has been tested and found to
remain functional after exposure to direct jet streams of water using a nozzle of 6.3 mm internal
diameter from any direction where approximately 12.5 L/ min of water is applied for a period of
more than 3 minutes from a distance of about 3 meters.
The water resistant performance of the system is based on our measurements under
the conditions herein described. Note that malfunctions as a result of water immersion
caused by misuse by the customer are not covered by the warranty.
To avoid the deterioration of the water resistant performance
Check the following and use the system correctly.
Do not use or leave the system in an extremely hot or cold environment (temperature outside the
range of 5 °C – 35 °C). If the system is used or left in outside the above range, the system may
automatically stop to protect internal circuitry.
Be careful not to drop the system or subject it to mechanical shock. Deformation or damage may
cause deterioration of the water resistant performance.
Do not use the system in a location where large amount of water or hot water may splash on it.
The system does not have a design that is resistant to water pressure. Use of the system in the
above location may cause a malfunction.
Do not pour high-temperature water or blow hot air from a hair dryer or any other appliance on
the system directly. Also, never use the system in high temperature locations such as in saunas or
near a stove.
Handle the cap with care. The cap plays a very important role in maintenance of the water
resistant performance. When using the system, make sure that the cap is closed completely.
When closing the cap, be careful not to allow foreign objects inside. If the cap is not closed
completely the water resistant performance may deteriorate and may cause a malfunction of the
system as a result of water entering the system.
Cap
How to care for the system when wet
If the system gets wet, first remove the water from the system, and then wipe off the moisture on the
system using a soft, dry cloth. Especially in cold regions, leaving moisture on its surface may cause the
system to freeze and malfunction. Be sure to wipe off the moisture after using the system.
Put the system on towel or dry cloth. Then leave it at room temperature and dry the system until no
moisture remains.
Specifications
Speaker section
Speaker system Approx. 42 mm dia. × 2
Enclosure type Passive radiator model
BLUETOOTH
Communication System
BLUETOOTH Specification version 3.0
Output BLUETOOTH Specification Power Class 2
Maximum communication range
Line of sight approx. 10 m*1
Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method FHSS
Compatible BLUETOOTH Profiles*2
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
HSP (Headset Profile)
HFP (Hands-free Profile)
Supported Codec*3SBC*4, AAC*5, LDAC*6
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)
*1The actual range will vary depending on factors such as obstacles between devices, magnetic
fields around a microwave oven, static electricity, reception sensitivity, aerial’s performance,
operating system, software application, etc.
*2BLUETOOTH standard profiles indicate the purpose of BLUETOOTH communication between
devices.
*3Codec: Audio signal compression and conversion format
*4Subband Codec
*5Advanced Audio Coding
*6LDAC is an audio coding technology developed by Sony that enables the transmission of
High-Resolution (Hi-Res) Audio content, even over a BLUETOOTH connection. Unlike other
BLUETOOTH compatible coding technologies such as SBC, it operates without any down-
conversion of the Hi-Res Audio content*7, and allows approximately three times more data*8
than those other technologies to be transmitted over a BLUETOOTH wireless network with
unprecedented sound quality, by means of efficient coding and optimized packetization.
*7Excluding DSD format contents.
*8In comparison with SBC (Subband Coding) when the bitrate of 990 kbps (96/48 kHz) or 909 kbps
(88.2/44.1 kHz) is selected.
Microphone
Type Electret condenser
Directional characteristic
Omni directional
Effective frequency range
100 Hz - 7,000 Hz
General
Input AUDIO IN jack (ø 3.5 mm stereo mini jack)
Power DC 5 V (using the supplied USB AC adaptor connected to AC 100 V - 240 V,
50Hz/60 Hz power supply) or, using built-in lithium-ion battery
Usage life of lithium-ion battery (using the BLUETOOTH connection)
Approx. 12 hours*9
Dimensions (including projecting parts and controls)
Approx. 191 mm × 62 mm × 65 mm (w/h/d)
Mass Approx. 480 g including battery
Supplied accessories USB AC adaptor (1)
Plug (3)*10
Micro-USB cable (1)
Operating Instructions (1)
Reference Guide (this document) (1)
*9When the specified music source is used and the volume level of the unit is set to 10.
If the volume level of the unit is set to maximum, the usage life will be approx. 3 hours.
Time may vary, depending on the temperature or conditions of use.
*10 Attach a plug to the USB AC adaptor before use. If multiple plugs are included, use one which is
appropriate to your country/region. Be sure to completely insert the plug into the USB AC
adaptor until it clicks.
Design and specifications are subject to change without notice.
中文(繁體字) 個人音響系統（無線喇叭）
警告
為降低火災或電擊的風險，請勿將USB AC變壓器暴露於雨水或濕氣中。
XB2
警語: 請勿拆解
注意事項
以行動電話使用時的注意事項
安全注意事項
購買地 工作電壓
USB AC變壓器的注意事項
放置注意事項
操作注意事項
清潔注意事項
其他
著作權注意事項
™
®
防水功能的注意事項
（在使用系統前閱讀）
系統的防水效能
***
符合防水效能規格的液體
*
*
*
避免防水效能退化
系統潮濕時的處理方式
規格
喇叭部份
BlUetooth
*
*
* ***
*
*
*
*
*
*
*
*
*
*
麥克風
一般
ø
*
*
*
*
Personal Audio System Reference Guide
SRS-XB2
4-587-045-51(1)
©2016 Sony Corporation
Printed in China
http://www.sony.net/
中文(繁體字) 個人音響系統（無線喇叭）
警告
為降低火災或電擊的風險，請勿將USB AC變壓器暴露於雨水或濕氣中。
XB2
警語: 請勿拆解
注意事項
以行動電話使用時的注意事項
安全注意事項
購買地 工作電壓
USB AC變壓器的注意事項
放置注意事項
操作注意事項
清潔注意事項
其他
著作權注意事項
™
®
防水功能的注意事項
（在使用系統前閱讀）
系統的防水效能
***
符合防水效能規格的液體
*
*
*
避免防水效能退化
系統潮濕時的處理方式
規格
喇叭部份
BlUetooth
*
*
* ***
*
*
*
*
*
*
*
*
*
*
麥克風
一般
ø
*
*
*
*
.
. USB
.
.( )
USB
.USB
.
( )
.
USB USB
.
.
.
. USB
BLUETOOTH
.
.USB
.
/ 60/ 50 240 - 100
USB
. . USB
USB . USB USB
.
USB USB
.() USB
. ()
. USB
USB
.
.
.
.
.
.
SBC .
.
. Sony
.Sony Corporation LDAC LDAC™
Bluetooth SIG, Inc. BLUETOOTH®
. Sony Corporation
. NFC Forum, Inc. N
.
( )
« » 3*IPX5 2* 1*
. «.(IP ) » IEC60529
.
.
:
:
: )
(.
.
1*
.
2*
:( ) IPX5
3*
3
/
12.5
6.3
. 3
.
.
.
35 – 5 )
. .(
. .
.
. .
.
.
. .
. .
.
.
.
.
. .
42
BlUetooth
3.0 BLUETOOTH
BLUETOOTH 2
1* 10
( 2.4835 - 2.4000) 2.4
FHSS
2* BLUETOOTH
( ) A2DP
( ) AVRCP
( ) HSP
( ) HFP
6*LDAC 5*AAC 4*SBC
3*
( 44.1 ) 20,000 - 20 (A2DP)
1*
.
. BLUETOOTH BLUETOOTH
2*
:
3*
4*
5*
(Hi-Res) Sony LDAC
6*
SBC BLUETOOTH .BLUETOOTH
8* 7*Hi-Res
. BLUETOOTH
.DSD
7*
909 ( 48/96) 990 ( ) SBC
8*
.( 44.1/88.2)
7,000 - 100
( 3.5 ) AUDIO IN
USB ) 5
( 60/ 50 240 - 100
(BLUETOOTH
)
9* 12
( )
(//) 65 × 62 × 191
480
(1) USB 10*(3)
(1) USB
(1)
(1) ( )
.10
9*
. 3
.
.USB 10*
. USB ./
.
.
. USB
.
.( )
USB
.USB
.
( )
.
USB USB
.
.
.
. USB
BLUETOOTH
.
.USB
.
/ 60/ 50 240 - 100
USB
. . USB
USB . USB USB
.
USB USB
.() USB
. ()
. USB
USB
.
.
.
.
.
.
SBC .
.
. Sony
.Sony Corporation LDAC LDAC™
Bluetooth SIG, Inc. BLUETOOTH®
. Sony Corporation
. NFC Forum, Inc. N
.
( )
« » 3*IPX5 2* 1*
. «.(IP ) » IEC60529
.
.
:
:
: )
(.
.
1*
.
2*
:( )
IPX5
3*
3 / 12.5 6.3
. 3
.
.
.
35 – 5 )
. .(
. .
.
. .
.
.
. .
. .
.
.
.
.
. .
42
BlUetooth
3.0 BLUETOOTH
BLUETOOTH 2
1* 10
( 2.4835 - 2.4000) 2.4
FHSS
2* BLUETOOTH
( ) A2DP
( ) AVRCP
( ) HSP
( ) HFP
6*LDAC 5*AAC 4*SBC
3*
( 44.1 ) 20,000 - 20 (A2DP)
1*
.
. BLUETOOTH BLUETOOTH
2*
:
3*
4*
5*
(Hi-Res) Sony LDAC
6*
SBC BLUETOOTH .BLUETOOTH
8* 7*Hi-Res
. BLUETOOTH
.DSD
7*
909 ( 48/96) 990 ( ) SBC
8*
.( 44.1/88.2)
7,000 - 100
( 3.5 ) AUDIO IN
USB ) 5
( 60/ 50 240 - 100
(BLUETOOTH )
9* 12
( )
(//) 65 × 62 × 191
480
(1) USB 10*(3)
(1) USB
(1)
(1) ( )
.10
9*
. 3
.
.USB 10*
. USB ./
.
Other manuals for SRS-XB2
10
Table of contents
Languages:
Other Sony Stereo System manuals
Sony
Sony ZS-D10 Marketing Specifications & Features User manual
Sony
Sony CDP-X3000 User manual
Sony
Sony LBT-GTZ4i - CD Changer Mini Shelf System User manual
Sony
Sony CMTBX1 - CMT BX1 Micro System User manual
Sony
Sony HCD-HP8V User manual
Sony
Sony HCD-GX470 User manual
Sony
Sony CDP-M11C User manual
Sony
Sony SHAKE5 User manual
Sony
Sony CMT-EP305 User manual
Sony
Sony SRS-XB3 User manual
Sony
Sony HCD-D109 User manual
Sony
Sony ICF-C11iP User manual
Sony
Sony MHC-GX25 - Stereo Mini System User manual
Sony
Sony CMT-HX90BTR User manual
Sony
Sony CMT-V10iP User manual
Sony
Sony DSX-GS80 User manual
Sony
Sony HCD-H170 User manual
Sony
Sony HCD-RV55 User manual
Sony
Sony CMT HPZ7 User manual
Sony
Sony GTK-XB5 User manual
