Sony Memory Stick User manual

© 2001 Sony Corporation
Memory Stick
Autorun Version 1.3
Operating Instructions
A-APB-130-11(1)

2
CLIE, Jog Dial, Memory Stick, the Memory Stick logo, and PictureGear are trademarks of Sony
Corporation.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or
other countries.
Graffiti, HotSync, and Palm OS are registered trademarks, and the HotSync logo and Palm are
trademarks of Palm, Inc. or its subsidiaries.
All other trademarks are trademarks of their respective owners.
Before using this software, please read the Software License Agreement that is supplied with the Sony
CLIE handheld.
❒Copying any or all of the contents of this software, sample images, and Operating Manual,
or renting the software are prohibited by copyright laws.
❒The Company is not liable for damage or loss resulting from the use of this software, or for
any claim from a third party.
❒The Company assumes no responsibility aside from the replacement of the media due to
manufacturing fault.
❒This software must not be used in a system other than that specified.
❒The software specifications may be subject to change without notice.

3
Table of Contents
Before Use Features ............................................................................................................... 4
System Requirements ....................................................................................... 5
Operation Starting Memory Stick (MS) Autorun ............................................................ 6
Setting Auto-run for an Application .............................................................. 7
Auto-run for the application in the Memory Stick media ........................... 8
Auto-run for application or associated data files in the Memory Stick
media. ................................................................................................................ 10
Changing the Auto-run Settings ............................................................. 12
Specify the data file in Memory Stick media to start applications in the
CLIE handheld automatically........................................................................ 13
Performing an Auto-run Function ................................................................ 15
Viewing the MS Autorun History Log ......................................................... 16
Changing Settings
Canceling the Auto-run Function Temporarily .......................................... 17
Deleting the Auto-run Setting ....................................................................... 18
Supplemental Information
Menu Commands ............................................................................................ 19
Options menu ............................................................................................ 19
Troubleshooting............................................................................................... 21

4
Before Use
Features
Memory Stick Autorun (hereafter referred to as MS Autorun) is an add-
on application which allows the Memory Stick media to copy and start a
specified application automatically when Memory Stick media is
inserted into the CLIE handheld. By removing the Memory Stick media,
hte application’s copy is deleted automatically from the memory of the
CLIE handheld. MS Autorun let a Memory Stick media function as
virtual memory to effectively utilize the memory of the CLIE handheld.
The available auto-run settings are :
Starting an application in the CLIE handheld automatically (page 7)
If you set a Memory Stick media for the PictureGear Pocket in the CLIE
handheld, then the PictureGear Pocket starts automatically when the set
Memory Stick media is inserted. It is also possible to let the Audio Player
start automatically when a related MagicGate (MG) Memory Stick media
stored with music data is inserted, after setting the Audio Player for the
MG Memory Stick.
Starting an application in a Memory Stick media automatically (page 8)
If you set an application in a Memory Stick media to start automatically,
then the application starts automatically when the Memory Stick media
stored with the application is inserted into the CLIE handheld.
Starting an application with related data in a Memory Stick media
automatically (page 10)
If you set a combination with an application and the data in a Memory
Stick media to start automatically, then the CLIE handheld loads the
application and starts the application with the set data automatically
when the Memory Stick media stored with them is inserted.

5
Starting a set application in the CLIE handheld automatically when a
memory stick media stored with related data is inserted.(page 13)*
If you set a combination with an application in the CLIE handheld and
the data in a Memory Stick media to start automatically, then the
application starts automatically when the Memory Stick media stored
with the set data is inserted.
* If you specify the PictureGear Pocket as an auto-run application, tap the
arrow
V on the top center of the screen in PictureGear Pocket to select
"MS." Likewise, if you specify gMovie player as an auto-run
application, tap the movie file you want to play.
Note
• The following applications are not recommended to use with MS Autorun;
“Address”, “Date Book”, “Memo Pad”, “To Do List”, “Calc” and “Mail”.
Data files not located on the CLIE handheld may not update properly doing a
HotSync operation.
• Some applications may not start automatically when inserting the Memory
Stick media into the CLIE handheld. Return to the Home screen and reinsert
the Memory Stick media.
System Requirements
The following devices and applications are required to use MS Autorun.
The MS Autorun application is preinstalled in the CLIE handheld.
CLIE handheld
A CLIE handheld equipped with a Memory Stick slot.
Computer
A computer with Palm Desktop for Sony Software installed, or a
computer equipped with a Memory Stick slot.
Memory Stick Gate (MS Gate) application
Used to install an application (.prc) and database files (.pdb) into
Memory Stick media.
Memory Stick media
Stores applications (.prc), database files (.pdb), and the auto-run setting.

6
Operation
Starting Memory Stick (MS) Autorun
Rotate the Jog Dial navigator to select MS Autorun, and then press
the Jog Dial navigator.
Or tap the icon.
A list of applications stored in the inserted Memory Stick media or in the
CLIE handheld is displayed.
Note
The application data displayed after starting the MS Autorun Version 1.3 is .prc
data or .pdb data stored in the folder "\PALM\LAUNCHER". When you copy
the data to use this application by using the MS Gate application, be careful to
select the location you copy the data to.
List of applications
(or list of databases)
Applications and data in the Memory Stick media are
displayed. Select this item to set up the data for
applications.
Applications in the CLIE handheld or in the Memory
Stick media are displayed. Select this item to set up an
application for auto-run.

7
Setting Auto-run for an Application
To start an application automatically when inserting the Memory Stick
media, set the following procedures. This example describes the setting
to automatically start the PictureGear Pocket application when inserting
the Memory Stick media containing image files into the CLIE handheld.
1Install the application (PictureGear Pocket).
To install the application, see the Operating Instructions for the CLIE
handheld.
Note
The PictureGear Pocket application is preinstalled in some series of the CLIE
handheld. For more information, refer to the Operating Instructions of the
CLIE handheld.
2Insert the Memory Stick media.
3Rotate the Jog Dial navigator on the Home screen or tap the
MSAutorun icon to select the MSAutorun icon, and then press
the Jog Dial navigator.
MSAutorun starts up.
4Press the Jog Dial navigator.
A list of applications stored in the CLIE handheld is displayed.
5From the list of applications displayed in the CLIE handheld,
tap the application PictureGear Pocket for auto-run setting.
6Tap Set.
The setting is stored in the Memory Stick media.
7Tap OK.
The auto-run setting for PictureGear Pocket is completed.
8Tap .

8
9Remove the Memory Stick media.
Try the setting on page 7.
Display the Home screen on the CLIE handheld, and then insert the
Memory Stick media to automatically start the PictureGear Pocket
application. Remove the Memory Stick media to quit and return to the
Home screen (page 15).
Note
When V Internal is displayed on the PictureGear Pocket screen, the image files in
the CLIE handheld are displayed. To set to display the images in the Memory
Stick media, tap V MS.
Auto-run for the application in the
Memory Stick media
To automatically start the application in the Memory Stick media, set as
follows. The example describes how to set gMovie . To prepare the
desired movie on gMovie, see Add on application Guide manual.
Note
The gMovie application is preinstalled in some series of the CLIE handheld. In
this case, install another application.
1Install the gMovie application.
To install the application, see the Operating Instructions manual for
the CLIE handheld.
2Insert the Memory Stick media.
3Start MS Gate from the Home screen.
4Tap gMovie from the displayed CLIE handheld side list.
5Tap MOVE.
The gMovie application and specified database files are moved into
the Memory Stick media and deleted from the CLIE handheld
memory.
Make sure you are in the folder \PALM\LAUNCHER.

9
6Return to the Home screen to start MS Autorun.
The list of applications in the Memory Stick media appears.
7Press the Jog Dial navigator.
8From the list displayed, tap gMovie.
9Tap Set.
The setting is stored in the Memory Stick media, and then “Autorun
setting”appears.
10 Tap OK.
The auto-run setting for gMovie is completed. Afterwards, return to
the Home screen to remove the Memory Stick media.

10
Auto-run for application or associated data
files in the Memory Stick media
To specify the data file in the Memory Stick media to start the application
automatically, set as follows. This example describes the setting for
gMovie for movie viewer and its data files.
Note
•Removing the Memory Stick media does not update the database files in the
Memory Stick media. Use caution when the application is required to be
updated.
•Though the gMovie data files are displayed in the Memory Stick media, the
examples below describe copying.
•The gMovie application is preinstalled in some series of the CLIE handheld. In
this case, install another application.
1Install the application (gMovieSonyE.prc) and its movie data
files (.pdb) into the CLIE handheld.
2Insert the Memory Stick media for auto-run setting into the
Memory Stick Slot.
3From the CLIE handheld Home screen, start MS Gate.
4From the list displayed, tap gMovie and then movie data file.
5Tap MOVE.
The specified application and database files are copied into the
Memory Stick media to be deleted from the CLIE handheld.
Make sure you are in the folder\PALM\LAUNCHER.
6Return to the Home screen to start MS Autorun.
The list of applications in the Memory Stick media appears.
7From the list displayed, tap gMovie.

11
8Tap the Select launch app drop down list and then tap "Select
install DBs".
The list of applications and data files appear.
9From the list displayed, tap the gMovie movie data file.
To select multiple data files, tap each item.
10 Tap Set.
The setting is stored in the Memory Stick media, and the “Autorun
setting”display appears.
11 Tap OK.
The auto-run setting for gMedia to display the specified database file
is completed.
Afterwards, return to the Home screen, and remove the Memory
Stick media.

12
Changing the Auto-run Settings
If you need to add new database files to the existing auto-run settings,
you can change the auto-run setting later.
The following is an example of adding (or canceling) the auto-run setting
for movie files that are set to auto-run with the gMovie application in
Memory Stick media.
Similarly, you can change the setting to delete specific data, or to start
the application in Memory Stick media by using the CLIE handheld.
1From the Home screen, start MS Autorun.
2Insert the Memory Stick media in the Memory Stick slot.
3Press the Jog Dial navigator.
The list of applications in the Memory Stick media appears.
Applications with auto-run settings are highlighted on the screen.
4Tap in the "Select launch app" drop-down list, and then tap
"Select Install DBs".
The list of applications and data files appears.
5To cancel a specified movie file, tap the highlighted file. To
add a movie file, tap on the unhighlighted file.
6Tap Set.
The setting is stored in the Memory Stick media, and the dialog box
for confirmation appears.
7Tap OK.
Changing the auto-run setting is completed.

13
Specify the data file in Memory Stick
media to start applications in the CLIE
handheld automatically
To specify the data files in the Memory Stick media to start the
application in the CLIE handheld automatically, set as follows. The
example describes the setting for gMovie and its sample data files.
Note
The gMovie application is preinstalled in some series of the CLIE handheld. In
this case, install another application.
1Install the gMovie application into the CLIE handheld.
2Insert the Memory Stick media for auto-run setting into the
Memory Stick Slot.
3From the Home screen, start MS Gate.
4Tap gMovie from the list displayed.
5Tap MOVE.
The specified data files are copied into the Memory Stick media to be
deleted from the CLIE handheld memory.
Make sure you are in the folder \PALM\LAUNCHER.
6Return to the Home screen to start MS Autorun.
The list of applications in the Memory Stick media appears.
7Tap gMovie from the list displayed.
8Tap the Select launch app drop-down list and then tap
"Select install DBs".
The list of applications and database files appear.

14
9Tap the movie data file of gMedia from the list displayed.
Tap each item to select multiple database files.
10 Tap Set.
The setting is stored in the Memory Stick media, and then the
Autorun setting display appears.
11 Tap OK.
The setting to start the example in the CLIE handheld automatically
displays the specified database files.
Afterwards, return to the Home screen to remove the Memory Stick
media.

15
Performing an Auto-run Function
1Insert the Memory Stick media set for auto-run into the
Memory Stick slot.
The Now Loading dialog box appears, and the specified application
and database files will be copied to the CLIE handheld. After the
copying is complete, the application will automatically start.
Note
Do not remove the Memory Stick media when the "Now Loading" dialog
appears.
2Use the launched application.
3When you finish using the application, remove the Memory
Stick media.
The application closes, and it will return to the Home screen. The
application and database files will automatically be deleted from the
memory of the CLIE handheld.
Note
•The auto-run function does not work if you insert a Memory Stick media
into your CLIE handheld during infrared data transfer or the check-in/out
operation with Audio Player while MS Gate or MS Autorun is running.
•Data in the Memory Stick media is not updated when the Memory Stick
media is removed.
•You cannot delete the data that MS Autorun copies into your CLIE
handheld if the Memory Stick media is removed during the check-in/out
operation with Audio Player while the PictureGear Pocket application is
running.
In this case, go to the Tools menu in MS Autorun and tap Recover. Sony
recommends that you go to the Home screen before removing the Memory
Stick media.

16
Viewing the MS Autorun History Log
When the auto-run function is performed by inserting or removing
Memory Stick media, a history log is created in the CLIE handheld
(MSAutorun_log). If auto-run fails, it is useful to check the history log for
information.
1From the Home screen, start MS Autorun.
2Tap the menu icon.
3Tap Display log.
The history log is displayed in the Autorun log dialog box.
4When you have finished checking the history log, tap close.
Note
The stored log is cleared each time Memory Stick media is inserted.

17
Changing Settings
Canceling the Auto-run Function
Temporarily
When you need to rearrange data stored in several Memory Stick media,
you may not want applications to automatically start. You can
temporarily cancel the auto-run feature using this procedure.
1From the Home screen, start MS Autorun.
2Tap the menu icon.
3Tap Preferences.
The Preferences dialog box appears.
4Tap the Disable checkbox in Autorun to select it.
5Tap OK.
The auto-run function is temporarily canceled.
zTo enable the auto-run function
Perform steps 1-3, listed above. Tap to clear the check mark in the Disable check
box.

18
Deleting the Auto-run Setting
When you delete the auto-run setting, you cancel the auto-run function
on the Memory Stick media.
1From the Home screen, start MS Autorun.
2Insert the Memory Stick media into the Memory Stick slot.
3Tap the menu icon.
4Tap Tools.
The Tools dialog box appears.
5Tap Delete autorun setting.
The Delete setting dialog box appears.
6Tap OK.
The auto-run setting is deleted.
7Tap close.
zWhere to store the auto-run setting
The auto-run setting of MS Autorun is stored in the file named
“\PALM\DEFAULT.ARN”in the Memory Stick media. You can delete auto-run
settings by deleting this file using your computer.

19
Supplemental Information
Menu Commands
Options menu
The Options menu is displayed by tapping the menu icon when MS
Autorun is running.
Display log
When Memory Stick media is inserted into or removed from your CLIE
handheld, a history log is created. From the Options menu, you can view
this information by tapping Display log.
Tools
The following buttons appear in the Tools dialog box:
Recover:
This button is displayed when the auto-run function is performed and
MS Autorun is started without removing the Memory Stick media. You
can delete the application and database files copied into your CLIE
handheld.
Delete autorun setting:
This button is displayed when the auto-run setting file is stored in the
inserted Memory Stick media. You can delete the auto-run setting in the
Memory Stick media.

20
Preferences
Displays the Preferences dialog box.
The following items appear on this dialog box:
Autorun:s Disable:
You can temporarily cancel the auto-run function.
MS List::
You can switch the format of the list of data in Memory Stick media.
about MS Autorun
The version information of the MS Autorun application is displayed.