Sony Trinitron KV-14M1A User manual

MODEL
KV-14M1A
KV-1411A
KV-14M1B
KV-1471B
KV-14M1D
KV-14T1D
KV-14M1E
KV-1411E
RM-836
RM-836
RM-836
RM-836
RM-836
RM-836
RM-836
RM-836
COMMANDER _ DEST.
ftalian
italian
French
French
AEP
AEP
CHASSIS NO.
SCC-H64G-A
SCC-H64F-A
SCC-H65F-A
SCC-H65E-A
SCC-H46G-A
SCC-H46F-A
Spanish SCC-H66F-A
Spanish SCC-H66E-A
MODEL
KV-14M1K
KV-14T1K
KV-14M1L
KV-14771L
KV-14T7R
KV-14M1U
KV-14T1U
SOnyY
_ ae —_"
| Yee 0000 O gu
RM-836
RM-836
RM-836
RM-836
RM-836
RM-836
RM-836
COMMANDER _ DEST.
OIRT
OIRT
Irish
Irish
OIRT
UK
UK
BE4 cuassis
CHASSIS NO.
SCC-H52H-A
SCC-H52F-A
SCC-H51D-A
SCC-H51C-A
SCC-H52G-A
SCC-H50F-A
SCC-H50E-A
TRINITRON = COLOR TV
SONY.

KV-14M1/14T1
ITEM MODEL _ Television System Channel Coverage Colour System
PAL, SECAM
PAL, SECAM
PAL, SECAM
NTSC3.58/4.43
(video input only)
VHF: E2-E12, $1-S20, A-H, H1,H2
. UHF: E21-E69, $21-S41
Italian B/G/H
_
OIRT
Irish
UK
14M1A 14M1B 14M1D {4M1E 14MikK | tamaut4aTtt
MODEL 1AT1A 14T1B {ATID 14T1E 14T1K aes
VHF: E2-E12, $1-S20, F2-F10, B-Q
UHF: E21-E69, $21-S41, F21-F69
B/G/H, L
VHF: E2-E12, $1-S20
UHF: E21-E69, S21-S41
VHF: E2-E12$1-S20
UHF: E21-E69, S21-S41
B/G/H VHF: E2-E12 UHF: E21-E69
D/K VHF: RO1-R12 UHF: R21-R69
B/G/H, D/K
14M1L/14T1L UHF: 21-69 VHF: A-J
14M1U/14T1U UHF: 21-69
SPECIFICATIONS
Picture Tube Super Trinitron [OUTPUTS]
Approx.
37
cm
(14
inches)
-
ee
Headph
k:
ack
(Approx.
34
cm
picture
measured
(|)
Headphone
jack:
minijac
Sound output 3W (music power)
diagonally)
110° -deflectj 2W (RMS)
aUeoneuyes Dimensions With tilt-swivel
Rear/Front
Terminals
373x385x408
mm
approx.
[INPUTS]
Without tilt-swivel
21-pin
Euro
connector
(CENELEC
standard)
Weight
Approx.
10.0
kg
Front connectors
Including audio / video input
Tilt-swivel stand (1)
Antenna (1)
-&) Video (phono jack) Other features
(>> Audio (phono jack)
Teletext (KV-14T1K/14TIL/14T1R/14T1U)
373x360x408 mm approx.
Supplied accessories RM-836 Remote Commander (1)
Including
RGB
input
TEC
designated
batteries
(2)
Teletext/Fastext (KV-14T1A/14T1B/14T1D/14T1E)

KV-14M1/14T1
[RM-836]
Remote control system Infrared control
Power requirements 3V dc (2 batteries) R6 (size AA)
Dimensions Approx. 210x45x24 mm (w/h/d)
Weight Approx. 90g (Not including battery)
Design
and
specifications
are
subject
to
change
without
notice.
KV-14M1L
mocername
|
KV-14M1A
|
KV-14M1B
|
KV-14mM1D
|
Kv-14m1E
|
KV-14M1K
adie
KV-14T1L
KV-14T1A
|
KV-14T1B
|
KV-14T1D
|
KV-14T1E
|
KV-14T1K
KV-14M1U
KV-14T1U
Front in (3)
AKB
in
16:9
mode
PON
|
ONT
NT
Txt/FLOF ON ON
(14T1A
only)
|
(14T1B
only)
|
(14T1D
only)
|
(44T1E
only)
|
(14T1K
only)
(14T1L/14T1U
only)
OFF OFF OFF
OFF
OFF
OFF
OFF OFF OFF
OFF OFF OFF
ON ON
TOPText
OFF OFF
OFF
OFF OFF OFF
OFF
OFF OFF OFF
OFF OFF
OFF OFF OFF
OFF OFF OFF
a
orr
|
orF
[ore
or
or
Torr
[ore
[ore
|
orr
|
or
OFF OFF
OFF OFF
OFF OFF
OFF OFF
ON ON
[ore
[ore [ork
|
or
ae a
ore
[ore
[ork
[on
[—orr [ore or [ore
[on [ore or [or
Torr [ore or
[or [ore [ork [on
[or [oF
on
Language Preost | tain
WARNING ( KV-14M1L/14T1L/14M1U/14T1U only )
The flexible mains lead is supplied connected to a B.S. 1363 fused
plug having a fuse of 5 AMP capacity. Should the fuse need to be
replaced, use a 55 AMP FUSE approved by ASTA to BS 1362, ie
one that carries the mark.
IF THE PLUG SUPPLIED WITH THIS APPLIANCE IS NOT
SUITABLE FOR YOUR SOCKET OUTLETS IN YOUR HOME.
IT SHOULD BE CUT OFF AND AN APPROPRIATE PLUG FITTED.
THE PLUG SEVERED FROM THE MAINS LEAD MUST BE
DESTROYED AS A PLUG WITH BARED WIRES IS
DANGEROUS IF ENGAGED IN A LIVE SOCKET OUTLET.
When an alternative type of plug is used it should be fitted with a 5 AMP
FUSE, otherwise the circuit should be protected by a5 AMP FUSE at the
distribution board.
How to replace the fuse.
Open the fuse compartment with the
screwdriver blade
and replace the fuse.
FUSE

KV-14M1/14T1
21 pin connector (-$4)1 )
G/£5
D00c000000 Gy
ODD 0000000 lo
© Connected
C2
a
es
[+ [ete coanina [0av= 886m pate Sre
Signal Signal Level
Audio Sais B Standard level : 0.5V rms
(Right) Output impedance : Less than 1k chms*
Audio input B Standard level : 0.5V rms
(Right) Output impedance : More than 10k ohms*
Audio output A Standard level : 0.5V rms
(Left) Output impedance : Less than 1k ohm’
Ground (Audio)
G)
round (Blue)
udio input A Standard level : 0.5V rms
Left) Output impedance : Less than 10k ohm”
Blue input 0.7 + 3dB, 75 ohms, positive
sie
High state (9.5 - 12V) : Part mode
Low state (0 - 2V) : TV mode
Input impedance : More10k ohms
Input capacitance : Less than 2nF
Function select
(AV control)
Ground (Green)
reen
Ground (Red)
Ground (Blanking)
Red input 0.7 + 3dB, 75 ohms, positive
(S signal)
0.7 + 3dB, 75 onms, positive
croma input
Blanking input
(Ys signal)
High state {1 - 3V) Low state (0 - 0.4V)
Input impedance : 75 ohms
Ground
(Video output)
Ground
(Video input)
1V + 3dB, 75o0hms,
positive syne : 0.3V (-3 + 10dB)
1V + 3dB, 75ohms,
positive sync : 0.3V (-3 + 10dB)
1V + 3dB, 75ohms,
positive sync : 0.3V (-3 + 10dB)
Video output
Video input
Video input
Y (S signal}
Common ground
(plug, sheild)
@ Not Connected (Open)
* at 20Hz - 20kHz

KV-14M1/14T1
TABLE OF CONTENTS
Section Title Page
1. GENERAL
CSOMING StAHle 5 eli sis iain Rane esiveandesceiidedig einen 7
TY Ope rauiOn ac gconieverveeviccnsae ee tansontans dda taneteeutans g
WEEINGS Oe AtlOM xesicoussstvasesesacsyanscancoundsceatianiuannwrunediere: 9
Optional COnNeCtIONS 000... esc sceeeteeeeeceeseeseeesseesneenereees 12
Additional Information ..0.....0. cc ceeeccesseeeseeseseeesseeesseeeeseers 13
CAUTION ATTENTION
SHORT CIRCUIT THE ANODE OF THE PICTURE TUBE AND THE
ANODE CAP TO THE METAL CHASSIS, CRT SHIELD, OR CARBON
PAINTED ON THE CRT, AFTER REMOVING THE ANODE.
WARNING !!
AN ISOLATION TRANSFORMER SHOULD BE USED DURING ANY
SERVICE TO AVOID POSSIBLE SHOCK HAZARD, BECAUSE OF
LIVE CHASSIS.
THE CHASSIS OF THIS RECEIVER IS DIRECTLY CONNECTED TO
THE AC POWER LINE.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY SHADING AND MARK JN ON THE
SCHEMATIC DIAGRAMS, EXPLODED VIEWS AND, IN THE PARTS
LIST ARE CRITICAL FOR SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
APRES AVOIR DECONNECTE LE CAP DE L'ANODE, COURT-
CIRCUITER L'ANODE DU TUBE CATHODIQUE ET CELUI DE
L'ANODE DU CAP AU CHASSIS METALLIQUE DE L'APPAREIL,
OU AU COUCHE DE CARBONE PEINTE SURLE TUBE CATHODIQUE
OU AU BLINDAGE DU TUBE CATHODIQUE.
ATTENTION !!
AFIN D'EVITER TOUT RISQUE D'ELECTROCUTION PROVENANT
D'UN CHASSIS SOUS TENSION, UN TRANSFORMATEUR
D'ISOLEMENT DOIT ETRE UTILISE LORS DE TOUT DEPANNAGE.
LE CHASSIS DE CE RECEPTEUR EST DIRECTEMENT RACCORDE
A L'ALIMENTATION SECTEUR.
ATTENTION AUX COMPOSANTS RELATIFS A LA
SECURITE!!
LES COMPOSANTS IDENTIFIES PAR UNE TRAME ET PAR UNE
MARQUE /\\ SUR LES VUES EXPLOSEES ET LES LISTES DE
PIECES SONT D'UNE IMPORTANCE CRITIQUE PUR LA SECURITE
DU FONCTIONNEMENT. NE LES REMPLACER QUE PAR DES
COMPOSANTS SONY DONT LE NUMERO DE PIECE EST INDIQUE
DANS LE PRESENT MANUEL OU DANS DES SUPPLEMENTS
PUBLIES PAR SONY.
ees gee

54
[R] RmM-836

6
Getting Started
Inserting the Batteries into the
Remote Commander
1 Turn the TV upside down onto a soft base.
2 Check that the arrows point forward and clip the
swivel to the base of the TV.
3 Turn the TV again.
4 Use the tilt-swivel to bring the TV into the optimum
viewing position.
Note « To remove the tilt-swivel, check that the arrows are
pointing forward, pinch the clip of the swivel
and pull away from the base of the TV.
Getting Started
Connecting the Aerial
if you connect a VCR, skip to step 4.
ri Mt
ETI
H FR
{eG
tl),
fi
Connect an external aerial to the
socket ff.
Where an external aerial is not
available connect the indoor aerial
supplied:
1 Insert the supplied aerial into the opening on top of
the set.
2 Connect the aerial to the socket K@ on the rear of the
set.
3 Adjust the aerial for optimum reception.
Getting Started 7

8
Connecting a VCR
.
Tl)
Ly
6 =
¢ It is recommended to tune in the VCR signal to
programme number “0”. For details, see “Presetting
Channels Manually” on page 13. _
Presetting Channels
Automatically
TV searches for all available
channels. If manual tuning is
preferred see Menu option -
Presetting Channels Manually.
1 Plug into mains. .
Depress power switch © B§ on TV set.
2 Press and hold on TV set until
auto tuning starts and screen shows.
Note * When Auto tuning stops the programme on
position 1 is seen.
Getting Started
TV Operation
TV Operation
This section explains functions used whilst watching TV. Most operations are carried
out using the Remote Commander.
To
Switch on
Switch off temporarily
Switch on again
Switch off completely
Select programmes
Display the programme number
Adjust the volume
Mute the sound
View video input
View programmes in 16:9 mode
Press
O Eon TV
o@
TV is now in standby mode, © indicator WY on
TV lights.
COG, PROGR +/-@ WJ or any number
button ®
© Ed on TV
To save energy we recommend switching off
completely when TV ts not in use.
PROGR +/- @W or number buttons ®
For double digit numbers press -/-- @ then the
number e.g. For 23, press -/--@ then 2 and 3.
@
Press again to make programme number
disappear.
—+/- ON
xk @
Press again to restore sound.
~) 08
Press again to return to TV programme.
2 @
Press again to return to 4:3 mode.
Note ¢ 4+ @ is to be used to optimise the
viewing of 16:9 signals which will
be available in the future.
TV Operation 9

10
Teletext Operation
Viewing Teletext
Teletext
is
an
information
service
broadcast
by
TV
stations.
1.
Select
the
channel
which
carries
the
teletext
service
you
wish
to
receive.
2. Press © @ to switch on teletext.
I
3
Input
three
digits
for
the
page
number
using
the
programme
number
buttons
©
or
PROGR
+/-
QW.
A Press () @ to switch off teletext.
Note
¢
Teletext
errors
may
occur
if
the
broadcasting
signals
are
weak.
Using
Other
Teletext
Functions
SS TELETEXT
L
Superimposing
teletext
on
the
TV
Press
@
@
once
in
teletext
mode
or
twice
in
TV
mode
to
el
superimpose
teletext
on
the
TV
screen.
Press
&
@
again
to
cancel
superimposing.
Freezing a teletext subpage
Press
©
@
(HOLD)
to
freeze
the
subpage.
Freezing
the
page
prevents
the
information
that
is
displayed
from
being,
updated.
Press
©
@
to
cancel
HOLD
and
allow
update
to
continue.
Revealing
concealed
information
(eg:
answers
to
a
quiz)
Press (2) @ to reveal information.
Press again to conceal the information.
Using
colour
buttons
to
access
pages
When
the
colour
coded
menu
appears
at
the
bottom
of
a
page,
press
the
colour
button
(red,
green,
blue
or
yellow)
'GTHIOIN]
to
access
the
corresponding
page.
Note
*
A
programme
status
message
in
a
blue
box
may
appear
when
you
change
programmes
(depends
on
broadcasters).
Teletext Operation
MENU Operation
Use
buttons
on
Remote
Commander
to
control
Menu
screen.
MENU MENU ®@
Menu Screen
on/
off
Green
@
scroll
up
Red
@
—/
Yellow
@
decrease
\//
%
\\V
increase
/
confirm(OK)
Blue
©
scroll down
Adjusting the Picture
1 Press MENU Q.
2
Press
green
@
or
blue
©
button
to
select
the
item
you
wish
to
change.
AOA
eR
ee
a
lee
SS
Symbol Item - Effect +
Oo Picture Less More
@ Colour Less More
03 Brightness Darker Brighter
nee Hue Reddish Greenish
oo a
Note
©
Hue
is
available
only
when
NTSC
signal
is
input.
3
Press
red
@
or
yellow
@
button
to
change
levels.
4
Press
MENU
@
to
return
to
normal
TV
screen.
Note
«
To
reset
to
factory
preset
picture
levels,
press
green
@
or
blue
©
button
to
select
>»<
and
press
yellow
(OK)
@
button.
MENU Operation 11

TZ
Using the Sleep Timer
The TV may be set to switch to the standby
mode automatically after a length of time
chosen by you. You may set the time
in 30 minutes steps up to 4 hours.
1 Press MENU @.
2 Press green @ or blue @ button to select (').
3 Press red @ or yellow @ button to set time delay.
0.00 (OFF) 0.30 1.00 1.30.... 4.00
4 Press MENU @ to return to normal TV screen.
When watching TV, press @ to display time remaining.
MENU Operation
Presetting Channels
Manually
Up to 60 programme positions are
available for presetting channels.
1 Press MENU @.
Press green @ or blue © button to select > and
press yellow (OK) @ button.
Select programme number using PROGR +/- QW or
the number buttons @.
Press green @ or blue @ button to select TV system
(BG or DK) if necessary and press red @ or yellow
button to change TV system.
Press green @ or blue © button to select tuning bar (|illll----)
and press red @ or yellow button to start channel search.
When a channel is found the tuning bar stops moving and
you see the picture.
If you want to store, press green © or blue © button to
select O and press yellow (OK) @ button. If you do not want
to store, press red @ or yellow @ button to continue search.
Repeat steps 3 to 6 for all other channels.
Press MENU @ to return to normal TV screen.
MENU Operation | 13

14
Skipping
Programme Positions
You can skip unused programme positions when
selecting channels with the PROGR +/- QW] buttons.
You can still select them, however, using the number
buttons ©.
1 Press MENU @.
2 Press green @ or blue © button to select > and
press yellow @ button.
3 Select programme number you want to skip
using PROGR +/- @ NM button or number
buttons ®.
A Press green @ or blue © button to select Coo and
press yellow (OK) @ button.
5 Press green @ or blue © button to select > and
press yellow (OK) @ button to store.
6 Repeat steps 3 to 5 for other unused programme
positions.
7 Press MENU @ to return to normal TV screen.
MENU Operation
Fine-Tuning
Channels
You can fine tune a stored channel if necessary.
1. Select the channel you wish to fine tune.
2 Press MENU @.
3 Press green @ or blue © button to select > and
press yellow (OK) @ button.
4 Press green @ or blue © button to select =F + and
use red @ or yellow @ button to adjust tuning.
5 press green @ or blue © button to select O and
press yellow (OK) @ button to store.
6 Press MENU @ to return to normal TV screen.
MENU Operation
15

16
a
Exchanging
Programme Positions
After tuning you may wish to rearrange the
programme positions.
1 Press MENU @.
2. Press green @ or blue © button to select and
press yellow (OK) @ button.
3 Press green @ or blue © button to select
PROGR ‘th and press yellow (OK) @ button.
4 press red @ or yellow @ button to select
the first programme position.
5 press the blue © button.
6
Press
the
red
@
or
yellow
@
button
to
select
the
second
programme
position.
7 Press blue @ button to select th and press
yellow (OK) @ button to exchange.
8 Repeat steps 4 to 7 for other programme
positions.
9 press MENU @ to return to normal TV screen.
MENU Operation
Optional Connections
Using the
Connectors
Your TV has one 21-pin connector £4 on the rear
of the set and two connectors (phono jacks -@_) video,
-$) audio) (J on the front of the set. You can connect
optional audio or video equipment to these connectors,
such as a VCR, video games or a video disc player.
1 Press -5)@E to view the video input signal.
2 Press £)@H or © @ to return to the normal
TV screen.
Note * To avoid picture distortion, do not use the 21-pin connector
and the front connectors at the same time.
Connecting
Headphones
Plug in the headphones to the 0 [J socket on the front of the TV
set, to mute the sound from the speaker.
Optional Connections
17

18
Additional Information
RR
a
a
a
Troubleshooting
Here
are
some
simple
solutions
to
the
problems
which
affect
the
picture
and
sound.
Problem
No picture, screen is dark, no sound
Solution
Plug the TV in.
Press © B@ on the TV.
Press () @ or the programme number
® on the remote commander if ©
indicator \ylj is on.
Check the aerial connection.
Check that the video source is on.
Turn the TV off for 3 or 4 seconds and
then turn it on again using og.
Poor or no picture (screen is dark, sound is good)
oe
Good picture, no sound
No colour on colour programmes
Distorted picture when you change programmes
or select teletext
Press MENU @ and adjust brightness
picture and colour levels.
Adjust the volume <<] +/-— on).
Disconnect any headphones.
Press 4K @) if ¢X is displayed on the
screen.
Press MENU @® and select appropriate
TV system.
Press MENU @) and adjust colour
balance.
Press MENU @ and reset to factory
settings.
Turn off the equipment connected to the
21-pin connector (@.
Partially discoloured picture when you
swivel the TV
Turn off the TV for fifteen minutes using
the power switch © B@ on TV set then
turn on again.
Remote commander does not function
Replace the batteries.
¢
If
you
continue
to
have
these
problems,
have
your
TV
serviced
by
qualified
personnel.
e NEVER open the casing yourself.
Additional Information