SOS SAFEMATE B-22 MHS User manual

READ INFORMATION COMPLETELY PRIOR TO USE
NOTICE: This shield provides LIMITED eye protection. It will not protect against all possible
eye hazards and is not indestructible or impenetrable. CAUTION: NEVER use this product
to protect against severe hazards such as but not limited to explosives, injurious chemicals,
fragmenting grinding wheels or discs, molten metal, lasers, welding, cutting, nail guns, sports
activities, simulated war or paintball games or similar activities. WARNING: MAINTENANCE &
CARE is important. Contact with certain chemicals, including those in some sunscreens, bug
repellants and lens cleaners may cause reduction in protection. Wash in a mild soap solution
and rinse in clean water. WARRANTY: SOS warrants that this product is free of defects in
material for one year from date of purchase. Replacement constitutes the sole remedy for
breach of this warranty. SOS disclaims all other expressed or implied warranties and shall not
have any other obligation or liability. This warranty does not apply to defects or damage from
misuse, alteration, use of unapproved cleaning agents, improper fit on glasses with which the
product is used or use unintended by SOS. Patent No. 5,748,278,6,393,609 B1

Call, Fax or E-mail for the location of your nearest distributor:
www.SideShield.com
TOLL FREE: 866-919-2020 • FAX: [phone]
4"'&."5&
¸
"
.)4
.VMUJ)B[BSE4IJFME
¸
»
B-22 MHS colors:
• Clear (Ref. C)
• Amber Hi-Vis™ (Ref. A)
• Ebony (Ref. B)
• Grey (Ref. S)
• Ice Blue (Ref. I)

1 2
Simply slide SafeMate shield
completely to front of frame.
Slide temple paddle tip through
the front flex opening.

SafeMate®Mounting is Simple.
Hold right sideshield firmly in your left hand with the frame “C” channel
of sideshield facing you.
➊
From inside shield, slide right temple paddle tip through the front
flex opening of the shield (see fig.1) . Then guide the paddle tip along the
side channel and through rear locking tab.
➋
Now slide the sideshield completely to the front of the temple and
into position around the front of your frame (see fig.2).
Repeat for left SafeMate shield.