Soundcore Life Q20 User manual

Uživatelská příručka | Brugervejledning | Benutzerhandbuch | Manual del usuario
Käyttöopas | Manuel de l’utilisateur | Manuale utente | Manual do Usuário
Användarhandbok | Gebruikershandleiding | Brukerhåndbok
取扱説明書 | 사용 설명서 | 用户手册 | 使用者手冊
Руководство пользователя |  | 
Soundcore Life Q20
User Manual
User Manual

User Manual
NC
Siri BassUP™

English 01
Powering On / Off
Power On 3” Press and hold for more than 3 seconds Flashing blue (Status indicator)
Power Off 3” Press and hold for 3 seconds
Steady red for 1 second (Status indicator)
ANC On
NC
1” Press and hold for more than 1 second Steady green (NC LED indicator)
ANC Off
NC
1” Press and hold for more than 1 second
NC LED indicator off
Pairing
ON
≤ 1m
Soundcore
Life Q20
Enter Bluetooth pairing mode when
Life Q20 is off 5” Press and hold for 5 seconds
Rapidly flashing blue Pairing mode
Steady blue Connected to a device(but is not playing music)
OFF(Status indicator)Connected to a device(playing music)
Rapidly flashing blue Connected to a device(Incoming call)

02 English
Controls
Bluetooth mode
X1 Press
Play / pause
Note: the status indicator will light up in blue for 2 seconds, then
turn off.
1” Press and hold for 1 second Next track
1” Press and hold for 1 second Previous track
Press Volume up / down
Default mode Normal Equalizer
X2
Press multi-function key twice
Note: Press twice again to switch back to
Normal Equalizer.
BassUP™(Dual Equalizer)
NC
1” Press and hold for 1 second
ANC mode (Active noise canceling mode) activation
ANC mode (Active noise canceling mode) deactivation
Active Noise Cancelling mode (ANC) blocks the noise from surrounding environment while wearing Soundcore Life Q20.
Mobile phone
X1 Press
Answer / End call
Put current call on hold and answer incoming call
1” Press and hold for 1 second
Reject call
Switch between held call and active call
Slow flashing blue (Status indicator)On a call
Slow flashing blue (Status indicator)Incoming call
1” Press and hold for 1 second Activate Siri / other voice control software

English 03
Aux-in
AUX
AUX
Plugging in an audio cable will automatically switch to AUX mode, and Bluetooth mode and ANC will turn off.
Charging Your Headphones
Notification sound (Tone) :There are only 2 hours
of playtime left. You will hear a voice prompt every
30 minutes. Low battery
Flashing red once every 60 seconds (Bluetooth LED
indicator)
Steady red (Status indicator) Charging
Note: Do not switch on Life Q20 while charging.
Off (Status indicator) Fully charged

04 English
Specifications
Specifications are subject to change without notice.
Input 5 V 0.65 A Impedance 16 Ω
Charging time 3 hours Driver (full range) 40 mm x 2
Playtime (Bluetooth with ANC mode on) 40 hours Frequency response 16 Hz - 40 KHz
Playtime (Bluetooth with ANC mode off) 60 hours Bluetooth version V 5.0
Playtime (Connected to audio cable with ANC mode on) 35 hours Range 15 m / 49.21 ft
Weight 268 g / 9.5 oz