Soundcore Life Q10 User manual

Soundcore Life Q10
User Manual
A3032 V02
Uživatelská příručka | Brugervejledning | Benutzerhandbuch | Manual del usuario
Käyttöopas | Manuel de l’utilisateur | Manuale utente | Manual do Usuário
Användarhandbok | Gebruikershandleiding | Brukerhåndbok
取扱説明書 | 사용 설명서 | 用户手册 | 使用者手冊
Руководство пользователя |  | 

01 English English 02
Charging Your Headphones
Flashing red once every 30 seconds Low battery
Steady red Charging (Note: Do not power on
Life Q10 while charging)
Steady blue Fully charged
Powering On / O
Power on Press and hold for 3 seconds Steady blue for 1 second
Power o Press and hold for 3 seconds Steady red for 1 second

01 English English 02
Charging Your Headphones
Flashing red once every 30 seconds Low battery
Steady red Charging (Note: Do not power on
Life Q10 while charging)
Steady blue Fully charged
Powering On / O
Power on Press and hold for 3 seconds Steady blue for 1 second
Power o Press and hold for 3 seconds Steady red for 1 second

03 English English 04
Pairing
Enter Bluetooth pairing
mode when Life Q10 is o Press and hold for 5 seconds
Enter Multipoint pairing
mode
Press and hold for 3 seconds
simultaneously
Rapidly flashing blue Pairing mode
Steady blue Connected to a device
• Once entered in multipoint pairing mode, you can manually connect
a second mobile device to your Soundcore Life Q10.
• Soundcore Life Q10 can only play music on one mobile device at a
time.
• Each time you power on your Soundcore Life Q10, it will
automatically connect to your last successfully connected device if
available.
Controls
Play / pause Press
Next track Press and hold for 1 second
Previous track Press and hold for 1 second
Volume up / down Press
BassUP™ Mode (Dual
Equalizer) Press
Answer / End a call
Press
Put the current call on hold and answer a new
incoming call
Reject a call Press and hold for
1 second
Switch between held call and active call
Activate Siri or other voice assistant soware Press and hold for
1 second

03 English English 04
Pairing
Enter Bluetooth pairing
mode when Life Q10 is o Press and hold for 5 seconds
Enter Multipoint pairing
mode
Press and hold for 3 seconds
simultaneously
Rapidly flashing blue Pairing mode
Steady blue Connected to a device
• Once entered in multipoint pairing mode, you can manually connect
a second mobile device to your Soundcore Life Q10.
• Soundcore Life Q10 can only play music on one mobile device at a
time.
• Each time you power on your Soundcore Life Q10, it will
automatically connect to your last successfully connected device if
available.
Controls
Play / pause Press
Next track Press and hold for 1 second
Previous track Press and hold for 1 second
Volume up / down Press
BassUP™ Mode (Dual
Equalizer) Press
Answer / End a call
Press
Put the current call on hold and answer a new
incoming call
Reject a call Press and hold for
1 second
Switch between held call and active call
Activate Siri or other voice assistant soware Press and hold for
1 second

Deutsch 0605 English
AUX-in
Plugging in an audio cable will automatically switch to AUX mode, and Bluetooth
mode will turn o.
Specifications
Specifications are subject to change without notice.
Input 5 V 0.65 A
Charging time 2hours
Playtime 60 hours
Impedance 16 Ω
Driver size 40 mm × 2
Frequency response 16 Hz - 40 kHz
Bluetooth version V5.0
Bluetooth range 15 m / 49.5 
Laden der Kopfhörer
Blinkt alle 30 Sekunden rot Niedriger Akkustand
Leuchtet rot
Ladevorgang (Hinweis: Schalten
Sie Life Q10 während des
Ladevorgangs nicht ein.)
Leuchtet blau Vollständig aufgeladen