SOUNDMASTER Highline FC-1000 User manual

FC-1000

Function
1. Volume 10. Sleep on/off
2. Tuning radio frequency 11. Snooze
3. Hour and minute display 12. Alarm on/off
4. Backlight 13. DC jack
5. Alarmtime 14. Alarm by radio/buzzer
6. Timeset wheel (turning backwards only) 15. Bandswitch AM/FM
7. Timeset wheel 16. Sleep 30-60-90 min.
8. Sleep LED indicator 17. Battery comp. Radio
9. Radio on/off 18. Battery comp. Clock
Technique
FM frequency 87,5 – 108MHz
AM frequency 530 – 1700KHz
Clock format 24-hour
Alarm format 12-hour
Batteries Clock 3V / Radio 3V (each 2 pcs UM-3/AA 1,5V)
DC adaptor Input 230V / output 3V 200mA
Powerconsumption 0,6W

1
Flip Clock Alarm Radio
Operating Instructions
Features
♦Flip Clock with Snooze Alarm
♦AM/FM radio
♦Battery operated or powered via AC adaptor
Installing the Batteries
1. Open the battery compartment cover on the underside of the unit.
2. Insert 4 x AA batteries following the polarity markings shown inside the battery compartment.
Two of the batteries are for the clock, the other two are for the radio, as indicated. The radio batteries also
power the buzzer alarm and night light.
3. Replace the battery compartment cover
Alternatively, an AC adaptor can be used (3V DC 200mA).
When to replace the batteries
When the radio sound becomes weak or distorted, replace the two radio batteries (these are marked inside
the battery compartment). Note that the alarm and night light functions will not work if the radio batteries are
exhausted. When the Clock slows, replace the two clock batteries.
Setting the Time
Turn the Time Setting Wheel to set the Minute and Hour Display in 24 hour format. The Time Setting Wheel is
designed to turn in one direction only (please refer to the indication mark printed at the bottom of the set), turning
the wheel in the reverse direction may cause permanent damage to the clock mechanism.

2
Setting the Alarm
1. Set the Alarm Time by turning Alarm Time Dial. The Alarm time works on a 12 hour cycle, so if you set your
alarm for 07:00, it will also sound at 19:00
2. Press the Alarm On/Off Button to turn the Alarm on. The button will pop up to indicate that it is set.
3. You can choose to wake to either Radio or buzzer – set this using the Alarm Mode Switch.
4. Press the Snooze Button .to suspend the Alarm by 5 minutes.
5. Press Alarm On/Off Button to switch of the alarm. The button will lock in its lower position to indicate that the
alarm is switched off.
To turn on Night Light
Press the Snooze Button to turn on the Back Light for 10 seconds.
Operating the Radio
1. Press the Radio On/Off Button to turn on the Radio.
2. Use the Band Switch to select AM or FM band.
3. Tune the radio using the Tuning Ring.
4. Adjust the Volume using the Volume Ring.
5. Press the Radio On/Off Button to turn off the radio.
To set Sleep mode
The radio can be set to play for 30, 60, or 90 minutes and then to automatically switch off.
1. Select the Sleep mode duration (either 30, 60 or 90 minutes) using the Radio Auto-off Switch.
2. Press the Sleep button and the Sleep LED Indicator (green LED) will illuminate.
3. The radio will automatically switch itself off after the preset period and the Sleep LED indicator (green LED) will
go off.
4. Pressing the Sleep button once before the end of the Sleep period will turn off the Sleep function,
Sleep LED indicator (green LED) will go off
Improving the Reception
Rotate the unit horizontally for optimum reception. A ferrite bar antenna for AM reception and a loop antenna for
FM reception are built into the unit. Do not put the unit near electrical appliances like TV set, DVD player, etc. to
avoid unwanted electromagnetic interference.