SOUNDMASTER FUR850 User manual

RADIO CONTROL CLOCK
INSTRUCTION MANUAL
Display
UP/12/24 5SNOOZE
8Bracket
Battery door
9
LOCK
7
6DOWN C/ F
wave
Radiocontrolclock
down
C F
up
12/24
1
2MODE
3
4WAVE
1
2MODE
3
4WAVE
TEMP
FUNCTIONS AND CONTROLS
. DISPLAY
. MODE KEY
. UP/12/24 KEY
. WAVE KEY
. SNOOZE KEY
. DOWN ⁄KEY
. LOCK SWITCH
. BRACKET
. BATTERY DOOR
OPERATION
1. Open the battery door[9] and insert two AAA batteries, then the Hour, Minute,
Second, Month, Date, Weekday and temperature will be shown on LCD screen.
2. When you just inserted the batteries into the battery compartment, it will
automatically detect the temperature once and the RCC will automatically
receive the signal once.
3. At this mode, press UP/12/24 key[3] to switch between the 12-hour system and
24-hoursystem.
4. Press DOWN key[6] to switch between the and .
5. Press MODE key [2] to view the preset alarm time.
6. At any mode (except ALARM mode), press SNOOZE key[5] once, the LED will
be light up for five seconds. Press the button when unit is sounding at alarm
time to stop the alarm immediately, but after five minutes, the unit will sound
again.
7. You can press any key to stop the alarm except the SNOOZE button[5]. If the
unit is receiving the wave at preset alarm time, then it will stop receipt of wave
automatically.
8. The unit will detect the temperature once a minute.

9. Press and hold the WAVE key[4] to receive the wave compulsively, if the tower
icon is flashing that means it is receiving signal. If the unit doesn't receive the
signal (i.e. there isn’t tower icon above the black line).
10. The unit will automatically receive the local signal at 00:00AM, 02:00AM,
04:00AM and 06:00AM in a day. If the unit has successfully received the time
signal once (i.e. the tower icon won’t flash), it won’t receive again until next day
(but you can press WAVE key[4] to receive compulsively again). The
approximate maximum receiving time is 10 minutes. If failed in receipt within
10minutes, then stop receipt immediately.
11. When you are setting the alarm time or clock time, the unit can also receive the
wave.
Note: When the unit received DST signal, DST icon will be display at top
right corner of the screen.
ALARM MODE
1. At normal display mode, press MODE key[2] to enter the alarm mode, you can
press UP/DST[3] or DOWN key[6] to start the alarm function or not. You can
see if there is a bell icon between the HOUR and MINUTE or not.
2. Press MODE key[2] for 3 seconds to set the alarm, first the HOUR is flashing,
press UP[3] or DOWN key[6] to adjust the value, press MODE key [2]again to
set the minute, and press UP or DOWN to adjust the value.
3. If any button weren’t pressed within 10seconds, it would return to the normal
time display.
TIME AND DATE MODE
1. At normal time mode, press MODE key[2] for 3 seconds to set the HOUR that is
flashing by pressing UP[3] or DOWN key[6]. If you confirm the set value, press
MODE key[2] to set the next one that will be flashing, you can also set the
minute-year-month-date by analogy. When you adjust the value by pressing
UP[3] or DOWN key[6], if you hold the key, the value adjusted will be fast
increased or fast decreased.
2. If any button weren’t pressed within 10 seconds, it would return to the normal
time display.
LOCK FUNCTION
When you push the LOCK Switch [7] at the right side of the unit close to the place
with LOCK silkscreen, which means all functional keys are locked.