
D isc ope r at ion s
Loading and e j ecting a disc
Turn the power on. Det ach t he front panel by pressing CLK and insert the disc wit h t he print ed side
facing upward int o t he slot . Press EJECT but t on t o ej ect t he disc.
H an dling com pa ct discs
‚Do not insert anyt hing ot her t han a CD into t he CD loading slot.
‚Do not use cracked, chipped, warped, or otherwise damaged discs as they may
cause skipping or noise dam age t he player.
‚Handle t he disc only by t he edges ( as shown in the picture) . To keep discs clean do not t ouch it s surface.
‚St ore discs in t heir cases w hen not in use.
‚Do not expose discs t o direct sunlight , high hum idit y, high tem perat ure or dust .
‚Prolonged exposure to extreme temperature (such as leaving the discs in your car during summertime)
can wrap a disc.
‚Do not at tach labels, w rit e on or apply chem icals to t he surface of t he discs.
‚Do not t ouch the recorded surface of the discs.
‚Use 12- cm CDs. Use only convent ional, fully circular discs. Do not use shaped discs.
13