Southern Enterprises FA939100TX User manual

FA939100TX- ESPRESSO
LYNDEN MEDIA
FIREPLACE MANTEL
ASSEMBLY INSTRUCTION
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-6 -5096
[e-mail]
www.seidal.com

LYNDEN MEDIA FIREPLACE
Parts List
Please review all parts and hardware before disposing of any packaging.
Call Customer Service if missing hardware. Do not return to store/retailer.
Using a screw that is too long will cause damage.
Before beginning assembly, separate each type of screw. Carefully study the
screw diagrams below. You may receive extra hardware with your unit.
A Quantity
of 6
CAM BOLT
B Quantity
of 4
WOOD DOWEL (￠8* 0mm)
C Quantity
of 6
CAM LOCK
D Quantity
of 8
SHELF PIN
E Quantity
of 2
DOOR PULL
F Quantity
of 2
LONG BOLT (5/ 2”*7/8”)
G Quantity
of 2
MAGNETIC CATCH
H Quantity
of 5
SCREW( *14MM)
I Quantity
of 2
SCREW(￠8*25mm)
J Quantity
of 2
METAL PLATE
K Quantity
of 26
SCREW( *14MM)
L Quantity
of 4
HINGE
M Quantity
of 1
FIREBOX（IN SEPARATE CARTON）

(1) Quantity
of 1
BIG UPPER PANEL
(2) Quantity
of 2
MIDDLE SIDE PANEL
(3) Quantity
of 1
SMALL MIDDLE PANEL
( ) Quantity
of 1
SHELF PANEL
(5) Quantity
of 1
LEFT ADJUSTABLE SHELF PANEL
(6) Quantity
of 1
RIGHT ADJUSTABLE SHELF PANEL
(7) Quantity
of 1
BIG LEFT SIDE PANEL
(8) Quantity
of 1
BIG RIGHT SIDE PANEL
(9) Quantity
of 1
LOWER LEFT DIVIDED PANEL
(10) Quantity
of 1
LOWER RIGHT DIVIDED PANEL

(11) Quantity
of 1
BOTTOM PANEL
(12) Quantity
of 1
LEFT DOOR PANEL
(13) Quantity
of 1
RIGHT DOOR PANEL
(1 ) Quantity
of 1
MIDDLE BACK PANEL
(15) Quantity
of 2
SIDE BACK PANEL
(16) Quantity
of 1
TOP
PANEL
(17) Quantity
of 2
UPPER SIDE PANEL
(18) Quantity
of 1
UPPER BACK PANEL
(19) Quantity
of 1
WOOD HOLDER
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
Call Customer Service at 1-800-6 -5096
Do not return product to store, please call
Manufacturer for assistance, questions or
Parts.
Assembly Tool Required
No.2 Phillips Screwdriver (Not Included)

LYNDEN MEDIA FIREPLACE
Assembly Instructions
Figure 1
Unpack and lay parts on clean,
padded surface like carpet or
blanket. Check that you have all
parts indicated on the front page
Insert cam locks (C) into predrilled
holes on the two lower side panel (7)
& (8) and two lower divided panel
(9) & (10).
Screw cam bolt (A) into predrilled
holes on shelf panel (4).
Attach the two lower side panel (7) &
(8) and two lower divided panel (9) &
(10).to shelf panel (4) by inserting
wood dowel (B) & cam bolt (A) into
corresponding predrilled holes until
the two lower side panel (7) & (8) and
two lower divided panel (9) & (10)&
shelf panel (4) meet.
Secure by rotating cam lock (C)
clockwise with Phillips screwdriver.
Repeat the same way to attach the
bottom panel (11 ) on the assembled
unit.
Figure 2
Insert cam locks (C) into predrilled
holes on the middle side panel (2)
and small middle panel (3).
Screw cam bolt (A) into predrilled
holes on pre-assemble parts in figure
1. Attach the middle side panel (2)
and small middle panel (3) to
pre-assemble parts in figure 1 by
inserting wood dowel (B) & cam bolt
(A) into corresponding predrilled
holes until middle side panel (2) and
small middle panel (3) &
pre-assemble parts in figure 1 meet.
Secure by rotating cam lock (C)
clockwise with Phillips screwdriver.
BC

LYNDEN MEDIA FIREPLACE
Assembly Instructions
Figure 3
Insert cam locks (C) into predrilled
holes on the middle side panel (2)
and small middle panel (3).
Screw cam bolt (A) into predrilled
holes on the big upper panel (1).
Attach the big upper panel (1) to
three middle panel by inserting wood
dowel (B) & cam bolt (A) into
corresponding predrilled holes until
the big upper panel (1) & three
middle panel meet.
Secure by rotating cam lock (C)
clockwise with Phillips screwdriver.
Figure
Insert cam locks (C) into predrilled
holes on the upper side panel (17) .
Screw cam bolt (A) into predrilled
holes on the pre-assemble parts in
figure 3.
Attach the upper side panel (17) to
the pre-assemble parts in figure 3 by
inserting wood dowel (B) & cam bolt
(A) into corresponding predrilled
holes until the upper side panel (17)
& the pre-assemble parts in figure 3
meet.
Secure by rotating cam lock (C)
clockwise with Phillips screwdriver.
A
A
17
17
BA
A
C
1

LYNDEN MEDIA FIREPLACE
Assembly Instructions
Figure 5
Insert cam locks (C) into predrilled
holes on the upper side panel (17) .
Screw cam bolt (A) into predrilled
holes on the top panel (16).
Attach the top panel (16) to the upper
side panel by inserting wood dowel
(B) & cam bolt (A) into corresponding
predrilled holes until the top panel
(16) & two upper side panel meet.
Secure by rotating cam lock (C)
clockwise with Phillips screwdriver.
Figure 6
Attach the middle back panels (14) &
side back panel (15) on the
pre-assembled unit by screw (H).
Then slip the upper back panel (18)
into the groove of middle back panel,
and attach it on the cabinet by screw
(H).
16
H
14
18
15
15

LYNDEN MEDIA FIREPLACE
Assembly Instructions
Figure 7
Insert the shelf pin (D) into the
pre-drilled hole on the cabinet side
panel and divided panel,
and well put the two adjustable shelf
panels (5) & (6) on it as shown.
Figure 8
Assemble the door hinge (L) on the
cabinet and right door panel (13) by
screw (K).
Assemble the magnet catch (G)
under the shelf panel by screw (H),
then attach the metal plate (J) on the
up inside of door panel by screw (K)
to let it can match the position of the
magnet catch.
At last, tighten the door pull (E) on
the door panel by long bolt (F) as
shown.
Repeat the same way to assemble
the left door panel (12) on the
cabinet.

LYNDEN MEDIA FIREPLACE
Assembly Instructions
Figure 9
Well put the fireplace (M) into cabinet
and avoid any scratch.
Figure 10
Assemble the wood holder (19) on
the bottom panel by using screw (I).
19

LYNDEN MEDIA FIREPLACE
Assembly Instructions
Figure 11
Now you can enjoy your new
fireplace.

Please immediately examine this product carefully. Any request for missing parts or damage replacement must be
received within 90 days of your receipt of the product. Replacement, if available, will be honored within this time
frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying product(s)
and we are not responsible for any damages due to product modification(s). If damages or missing parts are not
reported within 90 days of your receipt, we are under no obligation to provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri Central
time if you have product issues or email us at [e-mail]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[email protected]om
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019

CAUTION
The top shelf is intended for a flat screen television with a maximum overall width of 8”
and supports up to 85lb.
Each center shelf should not be loaded with more than 20 lb.
Each side shelf should not be loaded with more than 10 lb.
DO NOT EXCEED RECOMMENDED LOAD. Use with products heavier than the
maximum sizes and weights indicated may result in instability causing possible injury.
This unit contains a permanent warning sticker located on back panel.
Do not allow children under 16 years old to move the cart.
Model: FA9 9100TX- ESPRESSO
LYNDEN MEDIA
FIREPLACE MANTEL
Southern Enterprises, Inc
600 Freeport Parkway, Suite 200
Coppell, Texas, 75019
Manufacture Date: