SOYO SY-6IZM/3 User manual

SY-6IZM/3
Motherboard
Quick Start Guide
FC
CTested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
POST CONSUMER
RECYCLED PAPER
100%
Hardware
Installation
Quick BIOS
Setup
Introduction
The SOYO CD

SOYO™
2
SY-6IZM/3 Motherboard
Pentium
®
III, Pentium
®
II & Celeron
TM
processors
82440 ZX AGP/PCI Motherboard
3D Audio & AGP built-in
66 & 100 MHz Front Side Bus supported
Micro-ATX Form Factor
Copyright © 1998 by Soyo Computer Inc.
Trademarks:
Soyo is a registered trademark of Soyo Computer Inc. All trademarks are the property of their
owners.
Product Rights:
Product and corporate names mentioned in this publication are used for identification purposes
only and may be registered trademarks or copyrights of their respective companies.
Copyright Notice:
All rights reserved. This manual is copyrighted by Soyo Computer Inc. You may not reproduce,
transmit, transcribe, store in a retrieval system, or translate into any language, in any form or by
any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, any part of
this publication without express written permission of Soyo Computer Inc.
Disclaimer:
Soyo Computer Inc. makes no representations or warranties regarding the contents of this
manual. We reserve the right to revise the manual or make changes in the specifications of the
product described within it at any time without notice and without obligation to notify any
person of such revision or change. The information contained in this manual is provided for
general use by our customers. Our customers should be aware that the personal computer field is
the subject of many patents. Our customers should ensure that their use of our products does not
infringe upon any patents. It is the policy of Soyo Computer Inc. to respect the valid patent rights
of third parties and not to infringe upon or assist others to infringe upon such rights.
Restricted Rights Legend:
Use, duplication, or disclosure by the Government is subject to restrictions set forth in
subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at
252.277-7013.
About This Guide:
This Quick Start Guide is for assisting system manufacturers and end users in setting up and
installing the Motherboard. Information in this guide has been carefully checked for reliability;
however, no guarantee is given as to the correctness of the contents. The information in this
document is subject to change without notice.
If you need any further information, please visit our Web Site on the Internet. The address is
"http://www.soyo.com.tw".
6IZM/3 Serial - Version 1.0 - Edition: February 1999
*Thesespecificationsaresubjecttochangewithoutnotice

SY-6IZM/3 Quick Start Guide
3
Introduction
1 1 Introduction
Congratulationsonyourpurchaseofthe SY-6IZM/3 Motherboard.ThisQuickStartGuide
describesthestepsforinstallingandsettingupyournewMotherboard.
ThisguideisdesignedforalluserstoprovidethebasicstepsofMotherboardsettingand
operation.Forfurtherinformation, pleasereferto SY-6IZM/3MotherboardUser'sGuideand
TechnicalReferenceonlinemanualincludedontheCD-ROMpackedwithyour
Motherboard.
Unpacking
*Ifyourboardcomeswithadriverdiscandapapermanual,theQuickStartGuideandtheCD-ROMarenotincludedinthepackage.
WhenunpackingtheMotherboard,checkforthefollowingitems:
u TheSY-6IZM/382440ZXAGP/PCIMotherboard
u ThisQuickStartGuide
u TheInstallation CD-ROM
u TheCPURetentionSet
u OneIDEDeviceFlat Cable
uOneFloppyDiskDriveFlatCable
uSerialportflatcablewitha9-pinconnectorbracket

SY-6IZM/3 Quick Start Guide
4
Introduction
SY-6IZM/3 Motherboard Layout
Key Features
Ø SupportsIntelPentium
®
III processor (450-
550MHz), Pentium
®
II processor (233-
450MHz) & Celeron
TM
processor(266-
433MHz) )
Ø EasyCPUsettingsinBIOSwiththe
“SOYOCOMBOSetup”.
Ø 3DYAMAHAYMF740Audio
Ø ATIRageProGraphics/Video with
8MBVideomemoryonboard
Ø Auto-detectCPUvoltage
Ø PC98,APM,ACPI,UltraDMA/33
Ø Power-onbymodemoralarm
Ø SupportsWake-On-LAN(WOL)
Ø SupportsPower-OnbyPS/2Keyboard
Ø 3x32-bitbusmasteringPCIslots
Ø 1x16-bitISAslot
Ø 2xUSBports
Ø 1xIrDAport
Ø Supportsmultiple-bootfunction
Ø ATXpowerconnector
Ø Powerfailureresume
COM 1
VGA
PRT
USB 1
USB 2
PS/2 KB
Connector
PS/2 Mouse
Connector
PCI Slot #1
PCI Slot #2
PCI Slot #3
Intel
82371EB
IR1
15
1
CPUFAN
COM2
1
FDC
ISA Slot #1
ATX
Power
3
JP1
1
CHAFAN
1
Flash BIOS
YMF740-V
YAMAHA
W83977EF
-AW
Winbond
Game Port
LINE-OUT
LINE-IN
MIC JACK
J4
W83781D
828AC
Hardware
Monitoring
3
1
WOL
Header
JP44
Speaker
Keylock
Power
LED
Reset
PWRBT
Turbo
LED
HDD LED
_
+
_
+
_
+
_
+
J5
14
Winbond
W83782M
JP5
CMOS Clear
Jumper
JP8
JP3
3
1
ATI
RAGE Pro
3V
Lithium
Battery
IDE 2
1
IDE 1
1
3
1
DIMM1
DIMM2 DIMM3
Slot 1
Intel
82443 ZX
AC97
Codec
JP7
JP10

SY-6IZM/3 Quick Start Guide
5
Hardware
Installation
2 2 Installation
ToavoiddamagetoyourMotherboard,followthesesimpleruleswhile
handlingthisequipment:
l BeforehandlingtheMotherboard,groundyourselfbygraspinganunpaintedportion
ofthesystem'smetalchassis.
l RemovetheMotherboardfromitsanti-staticpackaging.Holditbytheedgesand
avoidtouchingitscomponents.
l ChecktheMotherboardfordamage.Ifanychipappearsloose,presscarefullytoseat
itfirmlyinitssocket.
Followthedirectionsinthissectiondesignedtoguideyouthroughaquickandcorrect
installationofyournew SY-6IZM/3 Motherboard.Fordetailedinformation,pleasereferto
SY-6IZM/3MotherboardUser'sGuideandTechnicalReference onlinemanualincludedon
theCD-ROMpackedwithyourMotherboard.
PREPARATIONS
Gatherandprepareallthenecessaryhardwareequipmenttocompletetheinstallation
successfully:
u Slot1processorwithbuilt-inCPUcoolingfan(boxedtype)
u SDRAMmodule
u Computercaseandchassiswithadequatepowersupplyunit
u Monitor
u PS/2Keyboard
u PointingDevice(PS/2Mouse)
u Speaker(s)(optional)
u DiskDrives:HDD,CD-ROM,Floppydrive…
u ExternalPeripherals:Printer,Plotter,andModem(optional)
u InternalPeripherals:ModemandLANcards(optional)
Notice1: ThisMotherboardfeaturesonebuilt-inVGAportandthreebuilt-inaudio-stereo
ports.ThereforeyoudonotneedtoinstallneitheraVGAcardnorasoundcard.
Notice2: Ifyouwanttouseanexternalspeakerconnectedto"Line-out"port,pleasemake
suretousean"amplifiedspeaker"thatcangenerateproperoutputsoundvolume.

SY-6IZM/3 Quick Start Guide
6
Hardware
Installation
Install the Motherboard
Followthestepsbelowinordertoperformtheinstallationofyournew SY-6IZM/3 Motherboard.
Step 1. Install the CPU
Mark your CPU Frequency: RecordtheworkingfrequencyofyourCPU
thatshouldbeclearlymarkedontheCPUcover.
FSB66MHz
266MHz(66 x4.0) 333MHz (66 x 5.0) 400MHz(66 x6.0)
300MHz(66 x4.5) 366MHz (66 x 5.5) 433MHz(66 x6.5)
FSB100MHz
350MHz(100 x 3.5) 450MHz (100 x 4.5) 550MHz (100 x 5.5)
400MHz(100 x4.0) 500MHz (100 x 5.0) 600MHz(100 x6.0)
CPU Mount Procedure: Tomounttheprocessorthatyouhavepurchased
separately,followtheseinstructions.
Retention Module Step 1. Open the two sides by folding them up.
Step 2.
Push the locks on top of the CPU
inward. Step 3. Insert the CPU into the retention
module. The CPU fits in the CPU slot in
only ONE way, do not try to force it in.
Step 4. After completely inserting the CPU, push the two locks on
top of the CPU outward. Now your CPU is ready for use.
To remove the CPU, press
the two notches on top of
the CPU inward. Now
press the two slides on the
retention module down and
remove the CPU.
Note:InstallingaheatsinkandcoolingfanontopofyourCPUisnecessaryforproperheatdissipation.
Failingtoinstalltheseitemsmayresultinoverheatingandpossibleburn-outofyour CPU.

SY-6IZM/3 Quick Start Guide
7
Hardware
Installation
Step 2. Make Connections to the Motherboard
ThissectiontellshowtoconnectinternalperipheralsandpowersupplytotheMotherboard.
InternalperipheralsincludeIDEdevices(HDD,CD-ROM),FloppyDiskDrive,ChassisFan,
FrontPanelDevices(TurboLED,InternalSpeaker,ResetButton,IDELED,and KeyLock
Switch.),Wake-On-LANcard,VGAcard,SoundCard,andotherdevices.
FormoredetailsonhowtoconnectinternalandexternalperipheralstoyournewSY-6IZM/3
Motherboard, pleaserefer to SY-6IZM/3MotherboardUser'sGuide andTechnical
ReferenceonlinemanualonCD-ROM.
Connectors and Plug-ins
IrDA (Infrared Device Header): IR1
Wake-On-LAN Header: JP44
Pin1 Pin2 Pin3 Pin4 Pin5 Pin1 Pin2 Pin3
VCC None IRRX GND IRTX 5VSB GND MP-Wakeup
CPU Cooling Fan: CPUFAN Chassis Fan: CHAFAN
Pin1 Pin2 Pin3 Pin1 Pin2 Pin3
GND 12V SENSOR GND 12V SENSOR
Power LED Keylock
Pin1 Pin2 Pin3
Pin1 Pin2
5V NC GND
ControlPin GND
Speaker
Pin1 Pin2 Pin3 Pin4
5V NC NC Speakerout
HDD LED Turbo LED PWRBT RESET
Pin1 Pin2 Pin1 Pin2 Pin1 Pin2 Pin1 Pin2
LEDAnode LED
Cathode LED Cathode GND Power On/Off GND PowerGood GND
CD Line-in: J4, J5 Pin 1 Pin 2 Pin 3 Pin 4
J4 RGLG
Connect the CD Line-in cord from the CD-ROM
device to the matching header J4 or J5. J5 RG G L
ATX Power On/Off: PWRBT ATX Power Supply: ATX PW
Connect your power switch to this
header (momentary switch type).
To turn off the system,
please press this switch and
hold down for longer than
4 seconds.
Attach the ATX Power cable to this connector.
When using the Power-On by PS/2 Keyboard
function, please make sure the ATX power
supply can take at least 720mA load on the 5V
Standby lead (5VSB) to meet the standard ATX
specifications.
1
1
1
11
1
1
Power LED
Key Lock
Speaker
Reset
PWRBT
Turbo LED
HDD LED

SY-6IZM/3 Quick Start Guide
8
Hardware
Installation
Step 3. Configure Memory
This Motherboard features 3 x DIMM for 168-pin 3.3V unbuffered DIMM
modules, providing support for up to 256MB of main memory using DIMM
modules from 8MB to 128MB.
Number of Memory
Modules DIMM 1 DIMM 2 DIMM 3
1Double-sided
/Single-sided Double-sided
2Double-sided
/Single-sided Double-sided
3Double-sided
/Single-sided Single-sided Single-sided
RAM Type SDRAM
Memory Module
Size (MB) 8/16/32/64/128 Mbytes
Note: BecauseDIMM2and3areshared,double-sidedDIMMscanbeused
inonlyoneof the DIMMs. With single-sidedDIMMsboth2 and3canbeused.
Step 4. Set JP3 for power up FSB clock and AGP bus clock.
JP3isusedtoadjustAGPbusclockfrequencydependingonthevalueofthefrontsidebus
(FSB)clock,alsothesettingoftheJP3determinesthepowerupFSBclockwhichwill
remaineffectiveuntiltheBIOSsettheFSBclocktotheCMOSsetting.
JP3Setting
Powerup FSB Clock 66MHz 100MHz
AGPClock AGPClock=FSBClock÷1AGPClock=FSBClock÷1.5
Note:ThespecificationofmaximumAGPbusClockfrequencyis66.6MHz.
∗ SetJP3topin1-2shortwhenyouuseaFSB100MHzCPU.
∗ SetJP3topin2-3shortwhenyouuseaFSB66MHzCPU.
∗ SetJP3topin1-2shortwhenyouuseaFSB66MHzCPUbutwanttooverclockthe
FSBclockto100MHzviatheBIOSsetting.
2
1
3
2
1
3

SY-6IZM/3 Quick Start Guide
9
Hardware
Installation
Step 5. Set the CPU Frequency
YoudonotneedtosetanyjumperfortheCPUfrequency.Instead,CPUsettingsare
changedthroughtheBIOS [SOYOCOMBO SETUP]. PleaserefertoChapter3-Quick
BIOSSetupfordetailsonhowtosettheSlot1processorfrequency.
Step 6. Enable/Disable Power-On by PS/2 Keyboard (JP1)
YoucanchoosetoenablethePower-OnbyPS/2Keyboardfunctionbyshortingpin2-3on
jumperJP1,otherwise,shortpin1-2todisablethisfunction.
Support Power-On
by Keyboard Disable Enable
JP1 Setting Disable Power-On by PS/2 Keyboard
function
(short pin 1-2)
Enable Power-On
by PS/2 Keyboard
function
(short pin 2-3)
Important: When using the Power-On by PS/2 Keyboard function, please make sure
the ATX power supply can take at least 720mA load on the 5V Standby lead (5VSB) to
meet the standard ATX specifications.
Step 7. Power Button Enable (JP8)
Yoursystemcanbepoweronbyeitherpressingapowerbuttonortypinginapassword,
whichcanbesetintheBIOSSOYOCOMBOSetup.Toavoidbeingunabletopowerupthe
systemduetoofforgettingthepassword,youcanplaceajumpercaptoshortJP8.Thiswill
alwaysenablethePowerButton.
Power Button
Enable Power Button always enabled Power Button according to BIOS setting
JP8 Setting
Shortpintoalways
enablethePower
Button.
OpenpinforaPower
Buttonfunction
accordingtotheBIOS
setting.
Step 8. External Suspend Button (JP10)
Somecasescomewithasuspendbutton,inserttheplugintoJP10.Inadditiontothrough
thisbutton,thesystemcanalsoenterthesuspendmodethroughyourOS.
Note:SuspendmodeonlyfunctionsifyourPowerManagementmodeisAPM.MakesurethattheBIOS
settingforPowerManagementisAPM.Windows98canbeinstalledwithACPIPowerManagement
(defaultisAPM),inthiscasesuspendmodewillnotfunctioneither.
2
1
3
2
1
3

SY-6IZM/3 Quick Start Guide
10
Hardware
Installation
Step 9. Enable/Disable Onboard VGA(JP7)
TheonboardVGAfeaturesofyourMotherboardarecontrolledbyjumperJP7.Youcan
choosetoenableordisabletheavailableVGAfunctionbysettingJP7accordingly.
l LeaveJP7opentoenabletheonboardVGAfunction.Then,youcanplugyourVGA
devicemonitor,aftertheMotherboardisinstalled.(YoudonotneedtoinstallanyVGA
card.)
l TodisabletheonboardVGAoptionsshortpinJP7.
Onboard VGA Disable Enable
JP7 Setting Short pin to disable
the onboard VGA
function.
Open pin to enable
the onboard VGA
function.
Step 10. Back Panel Connector
Step 11. Clear CMOS Data (JP5)
CleartheCMOSmemorybymomentarilyshortingpin2-3onjumperJP5foratleast5
seconds,andthenbyshortingpin1-2toretainnewsettings. Thisjumpercanbeeasily
identifiedbyitswhitecoloredcap.
CMOS Clearing Retain CMOS Data Clear CMOS Data
JP5 Setting Short pin 1-2 to retain
the new settings. Short pin 2-3 for
at least 5 seconds
to clear the CMOS.
Note: You must unplug the ATX power cable from the ATX power connector when
performing the CMOS Clear operation.
2
1
3
2
1
3
PS/2 KB
Connector
PS/2 Mouse
Connector
USB1
USB2
COM1
PRT
USB1VGA
LINE-OUT
LINE-IN
MIC JACK
JOYSTICK

SY-6IZM/3 Quick Start Guide
11
Hardware
Installation
Note on Over-clocking Capability
The6IZM/3Motherboardprovidesover-clockingcapability.Duetotheover-clockingsetting
yoursystemmayfailtobootuporhangduringruntime.Ifthisoccurs,pleaseperformthe
followingstepstorecoveryoursystemfromtheabnormalsituation:
1. Turnoffsystempower(IfyouuseaATXpowersupply,sometimesyouhavetopress
thepowerbuttonformorethen4secondstoshutdownthesystem)
2. SettheJP3topin2-3shortifyouuseaFSB66MHzCPU
3. Pressandholddownthe<Insert>keywhileturningonthesystempower.Keep
holdingdownthe<Insert>keyuntilyouseethemessageoftheCPUtypeand
frequency(133MHzor200MHz)appearonscreen
4. Pressthe<Del>keyduringthesystemdiagnosticcheckstoentertheAwardBIOS
Setupprogram
5. FromtheBIOSmainmenu,select[SOYOCOMBO]andmovethecursortothe[CPU
Frequency]fieldtosettheproper workingfrequency
6. Select[Save&ExitSETUP]andpress<Enter>tosavetheconfigurationtothe
CMOSmemory,andcontinuethebootsequence
Note: SOYOdoesnotguaranteesystemstabilityiftheuseroverclocksthesystem.
Anymalfunctions dueto over-clocking arenot coveredbythewarranty.

SY-6IZM/3 Quick Start Guide
12
Quick BIOS
Setup
3 3 Quick BIOS Setup
ThisMotherboarddoesnotuseanyhardwarejumperstosettheCPUfrequency.Instead,
CPUsettingsaresoftwareconfigurablewiththeBIOS [SOYO COMBO SETUP]. The
[SOYOCOMBOSETUP]menucombinesthemainCPUparametersthatyouneedto
configure,allinonemenu,foraquicksetupinBIOS.
Afterthehardwareinstallationiscomplete,turnthepower switchon, thenpress the <DEL> key
duringthesystemdiagnostic checksto entertheAwardBIOSSetupprogram.The CMOS
SETUPUTILITYwilldisplayonscreen.Then,followthese stepsto configurethe CPUsettings.
Step 1. Select [LOAD SETUP DEFAULT]
Selectthe“LOADSETUPDEFAULT”menuandtype “Y”attheprompttoloadtheBIOS
optimalsetup.
Step 2. Select [STANDARD CMOS SETUP]
Set[Date/Time]and[Floppydrivetype],thenset[HardDisk Type]to “Auto”.
Step 3. Select [SOYO COMBO SETUP]
Movethecursortothe [CPUSpeed] fieldtosettheCPUworkingspeed.
Available[CPUSpeed]settingsonyourSY-6IZM/3Motherboardaredetailedinthefollowing
table.Ifyousetthisfieldto[Manual],youarethenrequiredtofillinthenexttwoconsecutive
fields:(1)theCPURatio,and(2)theCPUFrequency.
CPU Frequency
233MHz (66 x 3.5) 350MHz (100 x 3.5)
266MHz (66 x 4.0) 400MHz (100 x 4.0)
300MHz (66 x 4.5) 450MHz (100 x 4.5)
333MHz (66 x 5.0) 500MHz (100 x 5.0)
366MHz (66 x 5.5) 550MHz (100 x 5.5)
400MHz (66 x 6.0) 600MHz (100 x 6.0)
433MHz (66 x 6.5)
Select the working frequency of
your Pentium® III, Pentium® II,
Celeronprocessor among these
preset values.
Note: Mark the checkbox that
corresponds to the working
frequency of your Pentium® III,
Pentium® II, Celeronprocessor in
case the CMOS configuration
should be lost.
Note: ifyouuseBusFrequenciesof75MHz,makesurethatyourPCIcardscancopewith
thehigherPCIclock.
Step 4. Select [SAVE & EXIT SETUP]
Press <Enter> tosavethenewconfigurationtotheCMOSmemory,andcontinuetheboot
sequence.

SY-6IZM/3 Quick Start Guide
13
The SOYO CD
4 4 The SOYO CD
YourSY-6IZM/3MotherboardcomeswithaCD-ROMlabeled"SOYOCD."TheSOYOCD
containstheuser'smanualfileforyournewMotherboard,the driverssoftwareavailablefor
installation,andadatabaseinHTMLformatwithinformationonSOYOMotherboardsand
otherproducts.
Step 1. Insert the SOYO CD into the CD-ROM drive
TheSOYOCDwillauto-run,andtheSOYOCDStartUpMenuwilldisplayasshownbelow.
(SOYOCD Start UpProgram Menu)
TheSOYOCDStartUpProgramautomaticallydetectswhichSOYOMotherboardyouown
anddisplaysthecorrespondingmodelname.
Step 2. Read SOYO [6IZM/3] Manual
Clickthe Read Manual buttontoopentheuser'smanualfileofyourMotherboard.

SY-6IZM/3 Quick Start Guide
14
The SOYO CD
PleasenotethatiftheStartUpprogramwasunabletodeterminewhichSOYOMotherboard
youown,themanualselectionmenuwillpopup,asshownbelow.Thenselecttheuser's
manualfilethatcorrespondstoyourMotherboardmodelnameandclick OK.
(ManualSelection Menu)
Theuser'smanualfilesincludedontheSOYOCDcanbereadinPDF(Postscript
Document)format.InordertoreadaPDFfile,theappropriateAcrobatReadersoftware
mustbeinstalledinyoursystem.
Note: TheStartUpprogramautomaticallydetectsiftheAcrobatReaderutilityisalready
presentinyoursystem,andotherwisepromptsyouonwhetherornotyouwanttoinstallit.
YoumustinstalltheAcrobatReaderutilitytobeabletoreadtheuser'smanualfile.Follow
theinstructionsonyourscreenduringinstallation,thenoncetheinstallationiscompleted,
restartyoursystemandre-runtheSOYOCD.
Step 3. Install Drivers
Clickthe Install Drivers buttontodisplaythelistof driverssoftwarethatcanbeinstalledwith
yourMotherboard.TheStartUpprogramdisplaysthedriversavailablefortheparticular
modelofMotherboardyouown.Werecommendthatyouonlyinstallthosedrivers.
Please select your manual In the box below
and click OK.
SOYO CD Manuals
6IZM/3OKBack

SY-6IZM/3 Quick Start Guide
15
The SOYO CD
Thefollowing drivers areavailable for Windows95
(Driver InstallationMenu)
Thefollowing drivers areavailable for Windows98
(Driver InstallationMenu)

SY-6IZM/3 Quick Start Guide
16
The SOYO CD
A short description of all available drivers follows:
ØIntel Southbridge Drivers
BecauseWindows95 doesnotrecognizethe SouthbridgeofthenewerIntelchipsets(TX,
BX,ZXetc)thisutilityhastoberun,itwillupdatethenecessaryWindowsfiles.(Onlyfor
Windows95)
ØSOYO SpeedPro Busmaster Driver for Win 95/98
WithoutthebusmasterdriverstheCPUwillneedtobeinvolvedeverytimedataisreadfrom
orwrittentotheHarddisk.ThebusmasterdriversmakeuseofDMA(DirectMemoryAccess)
torelievetheCPUofthisburden,thusspeedingupthesystem.
TheSOYOSpeedProdrivermakesuseofanadvancedcachingalgorithm,whichgivesitan
advantageoverother busmasterdrivers.
ØIntel Busmaster Drivers for Windows 95
ØIntel Busmaster Drivers for Win NT
ØIntel Busmaster Drivers for OS/2
Thesearetheofficial busmasterdriversassuppliedbyIntel.
Note:DoNEVER installtwo typesof busmaster drivers onyoursystem, thiswill
leadtoconflicts andsysteminstability. Therefore, ifyou install theSOYO
SpeedProBusmasterdriveryou canNOTinstall theIntel Busmasterdrivers.
Beforeinstallinganewbusmaster driverfirst UNINSTALLtheold busmaster
driver.
ØSOYO CD Xpress Utility
ThisutilitywillenhanceyourCD-ROMDrivedata-thoughputbyusingspaceonthe Harddisk
ascache.Thiswayapplicationprogramscanaccessdatafaster.Thisutilityissuitablefor
Windows95/98.
ØSystem Monitor Utility
YourmotherbaordcomeswithahardwaremonitoringIC.ByinstallingthisutilityTemperature,
FanspeedandVoltagescanbemonitored.Itisalsopossibletosetalarmswhencurrent
systemvaluesexceedorfallbelowpre-setvalues.
ThisutilitycomeswithapresetmonitoringragefortheCPUvoltage.However,thecore
voltageoftheprocessoryoupurchasedmayfalloutofthispresetrange,soyoumayneedto
adjustthepre-setvalue.PleaserefertotheSY-6IZM/3Motherboard’sCDmanualforthe
details.

SY-6IZM/3 Quick Start Guide
17
The SOYO CD
ØYAMAHA 740 Sound Drivers for Win95/98 and Win NT
Withthisapplicationprogramtheusercanmakeuseoftheonboardsoundchip.Before
installingtheYAMHA740SoundDrivers,youMUSTfirstinstalltheYAMAHA740driversfor
Windows9xorNT.
ØATI Rage Pro AGP
SelectthisItemandclickOKtostartuptheATIRagePROAGPdriverscreen.Followthe
instructionsonthescreentoinstallthedriversand/orapplicationprogramsyouneed.
Note: Onceyouhaveselectedadriver,thesystemwillautomaticallyexittheSOYOCDto
beginthedriverinstallationprogram.Whentheinstallationiscomplete,mostdriversrequire
torestartyoursystembeforetheycanbecomeactive.
However,todisplaythe listofall driverssoftwareavailablewithSOYOMotherboards,click
the DisplayalldriversontheSOYO CD button.Pleasemakesuretoinstallonlythe
driversadaptedtoyoursystem,orotherwisethiscausesystemmalfunctions.

Edition: February 1999
Version 1.0
6IZM/3 SERIAL
International Headquarters
SoyoComputerInc.,(Taiwan)
Tel:[phone]
Fax:[phone]
WebSite:http://www.soyo.com.tw
E-mail:[email protected]
USA Branch Office
SoyoTekInc.,(USA)
Tel:[phone]
Fax:[phone]
WebSite:http://www.soyousa.com
E-mail:[email protected]
SOYO Europe
SoyoEuropeB.V.,(Holland)
Tel:[phone]
Fax:[phone]
WebSite:http://www.soyo-europe.com
http://www.soyo.nl
E-mail:[email protected]
Germany Branch Office
SAATTechnologyGmbH,(Germany)
Tel:[phone]
Fax:[phone]
WebSites:http://www.saat.de
http://www.soyo-saat.de
http://www.soyo-saat.com
Email:[email protected]
UK Branch Office
Soyo(U.K.) Ltd.
Tel:[phone]
Fax:[phone]
WebSite:http://www.soyo.nl
E-mail:[email protected]
Japan Branch Office
SoyoComputer(Japan)
Tel:[phone]
Fax:[phone]
WebSite:http://www.soyo.co.jp
E-mail:[email protected]
Hong Kong Branch Office
SoyoHongKongLtd.(H.K.)
Tel:[phone]
Fax:[phone]
WebSite:http://www.soyo.com.hk
E-mail:[email protected]