Space Seating SpaceGrid 529-3R2V30 User manual

WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all screws are securely
tightened.
3. Check that all screws and are tight every three months
or as needed.
4. Dispose of packing material properly. Do not use plastic
cover as head covering. It may cause suffocation.
5. Do not use chair as a stepladder.
6. Use this chair for its intended purpose only.
7. Use mild detergent only for cleaning.
529-3R2V30 / 529-4R2V30
SpaceGrid BACK VISITOR’S CHAIR
OPERATING INSTRUCTIONS
529-4R2V30
(not shown)
LIMITED WARRANTY
SPACE®chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
 •Lifetimeoncomponentpartsincludingpneumaticcylinder,controlmechanism,baseandcasters.
 •3Yearsonupholsteryfabricandfoamagainstwearanddeterioration.
 •Leatherisnotwarrantedagainstroutinescratchingandscufng,asleatherissubjecttominorblemishesinuse.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five
year warranty on all parts applies. Fabric is warranted for one year. Thiswarrantygivesyouspeciclegalrights,andyoumayalsohaveotherrightswhichvary
fromstatetostate.
To make a warranty claim, contact Parts Department via e-mail parts@officestar.net, by Fax [phone], or toll free parts
number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. Provide model number and description of the
problem and obtain confirmation number. At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components
covered by warranty will be paid by Office Star Products.
®

NOTE: Large Washers are used here NOTE: Large Washers are used here
STEP 1 STEP 2 STEP 3
NOTE: Large Washers are used here NOTE: Large Washers are used here
NOTE: Large Washers are used here NOTE: Large Washers are used here
©OfceStarProductsFebruary2012
PART QTY
1. Base .......................1
2. Seat Cushion .................1
3. Back Assembly ...............1
4. Arms (4L & 4R) ...............2
5. Small Flat Washers ............6
6. Large Flat Washers ............7
7. Arm Screws ..................6
8. Base Screws .................4
9. Back Support Screws ..........3
10. Back Support (Pre-Installed) ....1
11. Allen Wrench ................1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 AttachArms(4L&4R)toSeatCushion(2)usingthreeSmallFlatWashers(5)andthreeArmScrews(7)foreacharm.
TIGHTEN ALL SCREWS COMPLETELY USING ALLEN WRENCH (11).
STEP 2AttachBase(1)toSeatCushion(2)withthearrowtowardsthefrontofthechair,usingfourLargeFlatWashers(6)andfourBaseScrews(8).
TIGHTEN ALL SCREWS COMPLETELY USING ALLEN WRENCH (11).
STEP 3 AttachBackSupport(10)toSeatCushhion(2)usingthreeLargeFlatWashers(6)andthreeBackSupportScrews (9), TIGHTEN ALL SCREWS
COMPLETELY USING ALLEN WRENCH (11).
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
4L
4R
11
X4
X4
X3
X3
X3
X3
9
2
22
3
10
1
11 11
7
7
5
5
8
6
X3
X3
6
529-3R2V30 / 529-4R2V30
SpaceGrid BACK VISITOR’S CHAIR
ASSEMBLY INSTRUCTIONS
®