Space 1587C User manual

WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and
knobs are securely tightened.
3. Check that all bolts screws and knobs are tight every
three months or as needed.
4. Do not overturn back tilt knob when decreasing
tension.
5. Dispose of packing material properly. Do not use
plastic cover as head covering. It may cause
suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
LIMITED WARRANTY
SPACE®chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
 •Lifetimeoncomponentpartsincludingpneumaticcylinder,controlmechanism,baseandcasters.
 •3Yearsonupholsteryfabricandfoamagainstwearanddeterioration.
 •Leatherisnotwarrantedagainstroutinescratchingandscufng,asleatherissubjecttominorblemishesinuse.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five
year warranty on all parts applies. Fabric is warranted for one year. Thiswarrantygivesyouspeciclegalrights,andyoumayalsohaveotherrightswhichvary
fromstatetostate.
To make a warranty claim, contact Parts Department via e-mail parts@officestar.net, by Fax [phone], or toll free parts
number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacic Time. Provide model number and description of the
problem and obtain conrmation number. At it’s option Ofce Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components
covered by warranty will be paid by Ofce Star Products.
2
1587C EXECUTIVE CHAIR
OPERATING INSTRUCTIONS
1
3
FEATURE
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
Toraiseseatremovepressurefromseatandliftlever(1)up.To
lowerseatheightsitonchairandliftlever(1)up.
NOTE:Itisnormalforchairtoslightlylower
underbodyweight.
• 2-TO-1 SYNCHRO TILT ADJUSTMENT
Forindividualcomfort,thischairhasbeenequippedwithan
adjustmentthatwillallowtheusertochangethetensionofthe
tiltingfeature.Turnknob(2)clockwisetoincreasetensionand
counter-clockwisetodecreaseoreasethetension.Tolockreturn
chairtotheuprightposition,pushlever(1)in.
 Tounlockpulllever(1)out.
NOTE:Becarefulnottoloosenbacktiltadjustmentknob
completely.
• ARM HEIGHT ADJUSTMENT
Toadjustarmheight,pushbutton(3)intoallowthearmstomove
upordownfreely.Releasethebutton(3)oncethedesiredheight
isreached.

PART QTY
1. Base .......................1
2. Casters .....................5
3. Pneumatic Cylinder ............1
4. Seat Plate ...................1
5. Seat Cushion .................1
6. Back Assembly . . . . . . . . . . . . . . . 1
7. Short Screws .................4
8. Flat Washers .................6
9. Long Screws .................6
10. Allen Screws . . . . . . . . . . . . . . . . 3
11. Arms Left (11L) Right (11R). . . . . 2
12. Back Support (Pre-Installed) . . . . 1
13. Allen Wrench .............1
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 InsertveCasters(2)intoBase(1),pushharduntilyoufeelorheartheCaster(2)snapintoplace.
STEP 2AttachArms(11L&11R)toSeatCushion(5)usingthreeLongScrews(9)andthreeFlatWashers(8)foreacharm.
TIGHTEN ALL SCREWS USING PHILLIPS SCREWDRIVER. (not provided).
STEP 3 AttachSeatPlate(4)toSeatCushion(5)witharrowpointingtowardsthefrontofthechair,usingfour
ShortScrews(7).FULLY TIGHTEN ALL SCREWS USING PHILLIPS SCREWDRIVER (not provided).
STEP 4 AttachBackSupport(12)toSeatPlate(4)usingthreeAllenScrews(10). FULLY TIGHTEN SCREWS
USING ALLEN WRENCH (13)
STEP 5 InsertPnuematicCylinder(3)intoBase(1)andplacetheassembledseatontopofPneumaticCylinder(3)
andapplydownwardpressure.
ATTENTION: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
1587C EXECUTIVE CHAIR
ASSEMBLY INSTRUCTIONS
©OfceStarProductsJuly2007
STEP 1 STEP 2 STEP 3
STEP 4
X5
X4
2
11R
11L
13
1
1
3
X3
12
4
9
8
4
5
6
X3 X3
X3 X3
5
7
9
8
STEP 5
10
Phillips Screwdriver also needed for
assembly (not provided)