Argos Kingston 602/9779 User manual

Dimensions
Width - 44cm
Depth - 52cm
Height - 99.5cm
Important– Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800
Assembly Instructions
- Please keep for future reference
602/9731
Issue 1 - 12/11/09
Kingston - Dining Chair
602/9779
602/9803
602/9834
130485

1
Safety and Care Advice
Important– Please read these instructions fully before starting assembly
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
components and tools listed on
pages 2 and 3.
plastic bags and separate them
into their groups.
away from the work area, small
parts could choke if swallowed.
space to layout the parts before
starting.
the product, this could cause
damage.
room) as possible.
surface to avoid damaging the
easier with 2 people.
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
carefully and responsibly.
and mild detergent, do no use
bleach or abrasive cleaners.
there are no loose screws on
this unit.
discarded with household
waste. Take to your local
authority waste disposal centre.
Care and maintenance
Maximum safe weight of
the user : 100kgs.

Components- Wooden parts
Please checkyou have all the panels listed below
2
Seat frame ( 42.5 x 44cm )
3
Back stand
(41.5 x 99.5cm)
1
JCBC Short Bolt x 6
Ruler- Use this ruler to help correctlyidentify thescrews
A
E
JCBC Long Bolt x 4
B
Dowel x 2
Spring Washer x 10
C
Allen Key x 1
Note: The quantities below are the correct amount to complete the assembly. In some cases more
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
F
Flat washer x 10
D
Components- Fittings
If you have damaged or missing components,
call the Customer Helpline: 08456 400800
Front leg ( 4 x 43cm )
2

3
AssemblyInstructions
Step1
Note: Do not fully tighten
bolts.
Step2
a: Insert dowel into the
holes behind the seat
Assembling front leg
a: Remove the dust cover
under the seat.
b: Place the chair seat
on top of table. Insert the
front legs into the seat.
3
2
c: Secure the JCBC short
bolt using spring
washers and flat washers
with allenkey .
A
C
D F
F
A
C
D
2
2
3
Assembling the back
stand
E
E
3

4
AssemblyInstructions
Note: Do not fully tighten
bolts.
Step3
Turn the chair and load
40kgs above the seat for 2
minutes.
b: Secure the back stand
with JCBC long bolts
using spring washers
flat washers and tighten
with allenkey 75%.
c: Secure the back stand
with JCBC short bolts
using spring washers
flat washers and tighten
with allenkey 75%.
Turn the chair
B
C
D
F
1
BF
DC
A
C
D
F
F
D
C
A
Note: This is to ensure
no 3 leged chair.

5
AssemblyInstructions
Step4
Fully tighten all bolts
a: Turn over the chair and
place on top of a table.
Fully tighten all bolts with
allenkey .
F
b: Cover back the discover
with the belco tape.
F
F
Assembly is complete.
If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800