Space 13-V22N1WA Product guide

WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws
and knobs are securely tightened.
3. Check that all bolts screws and knobs are tight
every three months or as needed.
4. Dispose of packing material properly. Do not
use plastic cover as head covering. It may
cause suffocation.
5. Do not use chair as a stepladder.
6. Use this chair for its intended purpose only.
7. Use mild detergent only for cleaning.
LIMITED WARRANTY
SPACE®chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
 •Lifetimeoncomponentpartsincludingpneumaticcylinder,controlmechanism,baseandcasters.
 •3Yearsonupholsteryfabricandfoamagainstwearanddeterioration.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by persons weighing 250 lbs. or
less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other
event beyond the control of Office Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or
consequential damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five
year warranty on all parts applies. Fabric is warranted for one year. Thiswarrantygivesyouspeciclegalrights,andyoumayalsohaveotherrightswhichvary
fromstatetostate.
To make a warranty claim, contact Parts Department via e-mail parts@officestar.net, by Fax [phone], or toll free parts
number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacic Time. Provide model number and description of the
problem and obtain conrmation number. At it’s option Ofce Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components
covered by warranty will be paid by Ofce Star Products.
13-V22N1WA, 13-V44N1WA, 13-V66N1WA,
13-V77N1WA & 13-V88N1WA
DELUXE CHAIR w/ VeraFlex™ BACK
OPERATING INSTRUCTIONS
FEATURE

  Toraiseseatremovepressurefromseatand 
 liftlever(1).Tolowerseatheightsitonchair 
 andliftlever(1).
NOTE: It is normal for chair to slightly lower
under body weight.

 Forindividualcomfort,thischairhasbeenequipped
withanadjustmentthatwillallowtheusertochange
thetensionofthetiltingfeature.Turnknob(2)clockwise
toincreasetensionandcounter-clockwisetodecrease
oreasethetension.Tolockreturnchairtotheupright
positionandpushlever(1)in.Tounlockpulllever(1)out.
NOTE:Becarefulnottoloosenthebacktiltadjustment
knobcompletely.

Toadjustarmheight,pushbutton(3)intoallowthe
armstomoveupordownfreely.Releasethebutton(3)
oncethedesiredheightisreached.

Toadjustarmwidth,pushlever(4)down,Adjustarmto
desiredwidth,andliftlever(4)uptolockintoplace.
2
3
4
1

PART 
1. Base ....................1
2. Casters ..................5
3. Pneumatic Cylinder .........1
4. Seat Plate ................1
5. Seat Cushion ..............1
6. Back Assembly . . . . . . . . . . . . 1
7. Arms (7L & 7R) . . . . . . . . . . . . 2
8. Arm Screws ...............8
9. Seat Plate Screws ..........4
10. Allen Screws . . . . . . . . . . . . . 3
11. Back Support (pre-installed) . 1
12. Allen Wrench .............1
13-V22N1WA, 13-V44N1WA, 13-V66N1WA,
13-V77N1WA & 13-V88N1WA
DELUXE CHAIR w/ VeraFlex™ BACK

©OfceStarProductsFebruary2008
Phillips Screwdriver also needed for
assembly (not provided)
12
10
5
1
3
6
88
7L
7R
9
X4 X4
X5
X3
4
4
11
x4
2
STEP 1 STEP 2 STEP 3
STEP 4 STEP 5
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 InsertveCasters(2)intoBase(1),pushharduntilyoufeelorheartheCaster(2)snapintoplace.
STEP 2 AlignholesofArms(7L&7R)withholesofSeatCushion(5),secureArms(7L&7R)usingthreeArmsScrews(8)foreachArm,

STEP 3AttachSeatPlate(4)toSeatCushion(5)withthearrowtowardsthefrontofthechair,usingfourSeatPlateScrews(9),

STEP 4 AttachBackSupport(11)torearendofSeatPlate(4)usingthreeAllenScrews (10),

STEP 5 InsertPneumaticCylinder(3)intoBase(1),placetheassembledseatontopofPneumaticCylinder(3)andapplydownwardpressure.

5