SPALDING M300011 User manual

108/06 ID# M300011
REQUIRED TOOLS
AND MATERIALS:
AND/OR
OPTIONAL TOOLS
AND MATERIALS:
1/2"
7/16" 9/16" 3/4"
•Two (2) capable
adults
•Hammer
•Safety Glasses
•(2 each) Wrenches and/or
Socket Wrenches and
Sockets (Deep-Well
Sockets are
Recommended).
• Extension is Recommended.
•Large and Small
Adjustable Wrenches
© COPYRIGHT 2005 by SPALDING
1/2"
7/16" 9/16" 3/4"
Toll-Free Customer Service Number for U.S: 1-800-558-5234,
For Canada: 1-800-284-8339,
For Europe: 00 800 555 85234 (Sweden: 009 555 85234),
For Australia: 1-800-632 7921
Internet Address: http://www.huffysports.com
SportsTable
Owner’sManual
Customer Service Center
• N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A.
READ AND UNDERSTAND
OPERATOR'S MANUAL
BEFORE USING THIS UNIT.
FAILURE TO FOLLOW
OPERATING INSTRUCTIONS
COULD RESULT IN INJURY
OR DAMAGE TO
PROPERTY.
WARNING!
Write Model Number
From Box Here:
This manual, accompanied by sales receipt, should be saved and kept on hand as a
convenient reference, as it contains important information about your model.
Adult Assembly Required.

2
ID# M300011 08/06
NOTICE TO ASSEMBLERS
Adult Assembly Required. Dispose of ALL packaging materials promptly. As with all products,
periodically inspect for loose small parts.
WARNING!
IF YOUR SYSTEM IS EQUIPPED WITH AN ACRYLIC BACKBOARD, EXAMINE BACKBOARD FOR ANY DAMAGE
THAT MAY HAVE OCCURRED DURING SHIPMENT. CRACKS IN THE BACKBOARD COULD RESULT IN
SUDDEN BREAKAGE. IF BACKBOARD IS DAMAGED IN ANY WAY PRIOR TO OR AFTER ASSEMBLY, CALL
TOLL-FREE NUMBER:
U.S. 1-800-558-5234; CANADA: 1-800-284-8339; http://www.huffysports.com
IMPORTANT!
Remove all contents from boxes.
Be sure to check inside pole sections,
hardware and additional parts are packed inside.
Questions or Missing Parts?
Call TOLL-FREE Customer Service
number listed on the front page!
STOP!STOP!
DON'T go back to the store!
STOP!
PRODUCT REGISTRATION:
Please remember to complete your product registration form on-
line at:
www.huffysports.com/customer_support/product_registration.
PARTS LIST - See Hardware Identifier
Item Qty. Part No. Description
1 1 908400 Rim, Table Support
2 1 208131 Table Top, Acrylic
3 1 Net
4 1 600057 Base, Laminated
5 4 206146 Glider, Feet
6 1 205673 Rod, 1/4-20 x 13-1/8 Long
7 2 206144 Washer, Large
Item Qty. Part No. Description
8 1 206141 Nut, Jam, 1/4-20
9 1 906133 Pole, (Black)
10 1 205856 Screw, Phillips Head
11 1 206142 Nut, Acorn, 1/4-20
12 6 206147 Bumpers, (Clear)
13 2 203006 Wrench, 7/16”
NOTE:
You may have extra parts
with this model.
Hardware kit is designed for
more than one style of
basketball system. Not all
hardware will be used.

308/06 ID# M300011
12
12
12
12
12
1
11
7
3
9
4
7
5
8
5
10
10
55
6
12
2
HARDWARE IDENTIFIER
(NUTS AND WASHERS)
#11 (1)
#8 (1)
#10 (4)
#7 (2)
Get to know the basic parts
of your system...

4
ID# M300011 08/06
Install net (3)
as shown.
4.
3
1
OUTSIDE VIEW
B.
D.
C.
A.
1
3
Place the rod (6) through the table base (4)
and install flat washer (7) and jam nut (8)
as shown.
2.
3.
4
10
5
6
7
8
4
Screw glider feet (5) into the bottom surface
of the table base (4) as shown.
1.
Position pole (9) over the rod (6) and into
the recessed location on the base (4) as
shown.
4
9
6

5
Install the rim (1)
assembly onto the
rod (6) above the
pole (9). Secure
with washer (7)
and acorn nut (11)
as shown. Tighten
completely.
5. 6. Attach the bumpers (12) to
the top of the rim (1) surface
as shown.
11
7
1
9
4
1
4
12
08/06 ID# M300011
2
Position table top (2) as shown.
7.