Spartherm Ebios-fire The City Reference guide

Brief instructions
ebios-fire - The City - wick burner

GB 2
FOREWORD / QUALITY PHILOSOPHY
You have decided in favour of a SPARTHERM ebios-fire - thank you for your
confidence in our company.
In a world of excess and mass production, our company stands for the
values expressed by our owner Gerhard Manfred Rokossa:
„High technical quality combined with contemporary design and a customer
service which ensures not only utmost satisfaction but also that we are
recommended.“
Together with our specialist partners, we offer first-class products which
will touch your emotions and evoke a sense of security and comfort. To
achieve this, we recommend that you read the operating instructions care-
fully in order to get a quick and comprehensive overview of your decorative
fireplace.
In addition to information on use, these instructions also include important
details on care and operation to guarantee your safety and the maintenance
of your ebios-fire as well as useful tips and guidance.
For further enquiries, please contact your specialist dealer.
We hope you enjoy your new fireplace.
Your SPARTHERM Team
G.M. Rokossa

GB
GB 3
CONTENTS
Important note 4
1. Scope of delivery 4
2. Fire protection 5
3. Commissioning 5
4. Taking out of operation 7
5. General warranty conditions 7
5.1 Area of application 7
5.2 General information 7
5.3 Warranty period 7
5.4 Requirements for this warranty to be effective 8
5.5 Exclusion of warranty 8
5.6 Elimination of defects / repair 8
5.7 Extension of the warranty period 8
5.8 Spare parts 8
5.9 Liability 9
5.10 Final comments 9

GB 4
IMPORTANT NOTE
As per the German Equipment and Product Safety Act (GPSG) and our
statutory duty to notify, we would like to inform you about heating with this
product.
The calorific value of 96% ethanol equates to approx. 29,600 kJ / kg. With
fuel consumption of 0.5 l/h the heat released is approx. 3,300 W.
The decorative fireplace requires a plentiful supply of fresh air when oper-
ated as otherwise the amount of carbon dioxide created exceeds the permit-
ted concentration in the room air.
As a rule, the fresh air supplied is cooler than the room air to be heated
up which results in a loss of heat. The effective heat output of a biofuel
fireplace is thus very low and, as such, decorative fireplaces which use
biofuel are not sources of heat.
These are only decorative fireplaces and are not intended for heating or
continuous operation. Nevertheless, please note that heat is generated as a
by-product of the combustion process. This can cause increased heating in
the room where the fireplace is installed. Please read the safety instructions
carefully.
PLEASE DO NOT USE BIO-ETHANOL WITH A PURITY LEVEL IN EXCESS
OF 97%.
1. SCOPE OF DELIVERY
ebios-fire with the following features:
• Housing
• 1 burner made of stainless steel
• 1 burner mat made of Ceramat FN
• Safety container for every burner, made of stainless steel
• Cover plate (with recess for the grab handle) made of stainless steel
• Bottle for moistening the burner mat
• Tank seal with gasket
• Fill level indicator
• Key for opening and closing the tank cover
• Cold hand for lifting and uncovering the cover plate
• Funnel for filling the burner
• Stick lighter
• Type plate (on the front of the burner)
• Ethanol 5 litre canister with outlet valve for initial commissioning (only
within Germany)
• Supplied pre-assembled in transport-friendly disposable cardboard
packaging

GB
GB 5
2. FIRE PROTECTION 3. COMMISSIONING
Proceed as follows:
1. Ensure that there is a sufficient supply of air.
2. Make sure that the burner has gone out and has cooled down fully
(minimum waiting time after being extinguished = 1 hour).
3. The burner can remain in the housing when being refilled. For this pur-
pose, open the tank cover. Depending on the installation situation, it may
prove necessary to remove the glass safety panes.
4. Check the tank contents.
5. Make sure that the cover plate is placed on the burner and covers the
burner mat.
6. Use a wrench to open the filling screw.
7. Insert the funnel into the filling opening and pour in a maximum of 2.6
litres of bioethanol.
Distance from combustible components
Installation specification and
insulation measures
150 mm 150 mm
500 mm
10 mm
10 mm
20 mm
40 mm
Thermal insulation (min. 40 mm)
Air circulation

GB 6
8. The fill level indicator shows the maximum permitted fill level.
The maximum fill level is reached once the red ball rises to the top.
9. Pick up the bottle to wet the burner. Insert the bottle with the opening
into the tank opening so that it projects into the fuel. Press the bottle
together so that the air escapes and the fuel is sucked up when it is
released. Wait until the bottle returns to its original shape.
10.Seal the filling plug securely using the wrench.
11.Close the housing cover, ensure that the cover does not project into the
flames but remains a uniform distance from the burner channel. Then
insert the protective panes.
12.Insert the cold hand to grip the cover plate and lift it off.
13.Wet the burner mat with fuel using the bottle which has just been filled.
14.Put the bottle down to one side.
15.Wait approx. 2 minutes before igniting the fire to allow the wick to be
fully saturated with ethanol.
16.Ignite the fire on the burner mat and step back from the flames. It may
take a few minutes until uniform flames appear.

GB
GB 7
Should you ever pour in too much fuel and cause the burner to overflow,
the ethanol collects in the safety container. Empty this immediately and
before lighting the burner. Clean the surface of the burner until it is dry and
completely free of ethanol.
Caution: Ethanol is highly combustible. There must be no sources of igni-
tion in the vicinity!
4. TAKING OUT OF OPERATION
If you wish to take the burner out of operation at an earlier stage than
normal, place the cover on the burner with the aid of the ‘cold hand’. Insert
the ‘cold hand’ to grip the cover plate and then cover this over the burner
channel.
5. GENERAL WARRANTY CONDITIONS
5.1 AREA OF APPLICATION
These standard warranty terms apply for the contractual relationship
between the manufacturer, Spartherm Feuerungstechnik GmbH, and the
dealer/distributor. They are not congruent with the contractual and warranty
terms which the dealer/distributor offers his customers in individual cases.
5.2 GENERAL INFORMATION
This product has been manufactured in compliance with current standards
of quality control. The materials used have been carefully selected and - like
the production process - are subject to on-going quality control.
Specialist knowledge is required when assembling and installing the prod-
uct. The product must, therefore, only be installed and commissioned into
service by specialist technical staff, in compliance with current statutory
provisions.
5.3 WARRANTY PERIOD
The standard warranty terms only apply within Germany and the European
Union. The warranty period and scope of the warranty are ensured within the
framework of these conditions outside the statutory warranty which remains
unaffected.
Spartherm Feuerungstechnik GmbH grants a 24-month warranty on ebios-
fire devices (Solitaire and inserts)
Spartherm Feuerungstechnik GmbH grants a 6-month warranty on wearing
parts in the fire area, e.g., wicks, burner mats, seals and glass ceramic.

GB 8
5.4 REQUIREMENTS FOR THIS WARRANTY TO BE
EFFECTIVE
The warranty period shall begin on the date, on which the product is deliv-
ered to the dealer / distributor. Invoices or delivery notes may be used as
confirmation of the warranty commencement date. The warranty certificate
for the product must be presented by the claimant upon making a warranty
claim. Spartherm Feuerungstechnik GmbH is not obliged to satisfy any claim
if such documentation is not presented.
5.5 EXCLUSION OF WARRANTY
This warranty does not cover:
• component wear
Wick/burner mat due to thermal stress
• the fireplace surfaces:
Discolouration of the finish or on the galvanic surfaces of the furniture
and/or burner which are a result of thermal stresses or overloading
• the glass panes:
contamination, due to soot or other burnt-on combustion materials and
visual deterioration due to thermal loading.
• Use of unsuitable or non-designated fuel.
• We recommend bioethanol from Spartherm Feuerungstechnik GmbH
with a concentration in excess of 96% for your ebios-fire device.
• incorrect transportation and/or incorrect storage:
• inappropriate or careless handling of fragile components, such as glass
or ceramics
• improper operation and/or use
• incorrect filling of system
• lack of maintenance
• incorrect set-up/installation of device
• failure to comply with Installation and Operating Manual
• technical modifications made to the appliance by third parties
5.6 ELIMINATION OF DEFECTS / REPAIR
Independent of any statutory provisions acknowledged as taking precedence
over the terms of this warranty, all necessary repair works resulting from
material or manufacturing defect shall be carried out free-of-charge and
shall not invalidate the remaining provisions of the warranty.
Within the scope of this warranty promise Spartherm
Feuerungstechnik GmbH reserves the right to either remedy the fault or
replace the device free of charge. The elimination of defects shall take
precedence.
The terms of this warranty shall not extend to any damage or compensation
not covered by statutory provisions.
5.7 EXTENSION OF THE WARRANTY PERIOD
The warranty period shall automatically be extended, where claims made in
respect of these warranty provisions result in the repair or replacement of
defective equipment.
5.8 SPARE PARTS
Only the manufacturer’s own components, or replacement parts recom-
mend-ed and approved by the manufacturer, shall be used for appliance
servicing and repair.

GB
GB 9
We reserve the right to make alterations to the technical data contained
herein and accept no liability in respect of any errors made.
5.9 LIABILITY
Damages and claims for compensation which are not the result of deliv-
ery of a defective appliance from Spartherm Feuerungstechnik GmbH are
excluded and are not part of this warranty promise.
The above shall not include claims made in respect of statutory legal
requirements.
5.10 FINAL COMMENTS
In addition to these warranty conditions and our commitment to them, our
dealers and contractual partners are pledged to assist you in both word
and deed.
It is expressly recommended to have ebios-fire products checked regularly
by a stove fitter/specialist dealer.

GB 10
NOTE

GB
GB 11

SPARTHERM
DIE WELTMARKE FÜR IHR WOHNZIMMER
The Global brand for your living room | La référence mondiale pour votre salon | Il marchio mondiale per il vostro soggiorno
La marca mundial para su salón | Het merk van wereldformaat voor uw woonkamer | Światowa marka do Państwa salonu
Торговая марка № 1 для Вашего дома
D Ihr Fachhändler | UK Your specialist dealer | F Votre revendeur spécialisé
IT Il vostro rivenditore specializzato | E Sus comercios especializados
NL Uw vakhandelaar | PL Państwa sprzedawca | РУС Ваш дилер
A1-SP-GB/0.000/09/2015
Spartherm Feuerungstechnik GmbH · Maschweg 38 · D-49324 Melle
Phone [phone] · Fax [phone] · www.spartherm.com