Spartherm Quadra Inside I SL User manual

Installation and Operating Manual
ebios-fire Quadra Inside I / II / III SL

GB 2
PREFACE / QUALITY PHILOSOPHY
You have decided in favour of a SPARTHERM ebios-fire - thank you
for your confidence in our company.
In a world of excess and mass production, our company stands for the
values expressed by our owner, Gerhard Manfred Rokossa:
'High technical quality combined with contemporary design and service to
the satisfaction of our customers, so they will recommend us to others'.
Together with our specialist retail partners, we offer you first-class products
that will touch your customers emotionally, and will inspire feelings such
as a feeling of security, safety and comfort. To achieve this, we recommend
that you read the operating instructions carefully in order to get a quick and
comprehensive overview of your decorative fireplace.
In addition to information on use, these instructions also include important
details on care and operation to guarantee your safety and to protect the
value of your ebios-fire as well as useful tips and guidance.
For further enquiries, please contact your specialist dealer.
We hope you enjoy your new stove.
Your SPARTHERM Team
G.M. Rokossa

GB
GB 3
CONTENTS
1. General instructions 5
1.1 Special notes on installation Quadra Inside II SL & III SL 5
2 Scope of delivery 6
3. Assembly instructions 6
3.1 Technical data 7
3.1.1 Quadra Inside SL 7
3.1.2 Quadra Inside II SL 8
3.1.3 Quadra Inside III SL 9
3.2 CERAMAT FN burner fleece 10
3.3 Basic installation requirements 10
3.4 Installation site 10
3.5 Installation/assembly 11
3.6 General notes for installation in bespoke furniture items 11
3.6.1 Minimum dimensions for furniture construction 13
3.6.1.1 Quadra Inside I SL 13
3.6.1.2 Quadra Inside II SL 13
3.6.1.3 Quadra Inside III SL 14
3.6.2 Installation of Quadra Inside I / II / III SL 14
3.6.3 Fire protection/minimum distances during the set-up of furniture 16
3.7 General notes on installation in open fire areas / fireplace inserts
Sbuilt by craftsmen 19
3.7.1 Minimum dimensions for fireplaces created by craftsmen 21
3.7.1.1 Quadra Inside I SL 21
3.7.1.2 Quadra Inside II SL 22
3.7.1.3 Quadra Inside III SL 23
3.8 Fire protection / minimum distances for fire areas created
by craftsmen 24
3.8.1 Quadra Inside I SL 24
3.8.2 Quadra Inside II SL 24
3.8.3 Quadra Inside III SL 24
3.9 Combustion air supply 24
4. Safety check 25
4.1 General information on operation 25
4.2 Fire protection 26
4.3 Fuel 27
4.4 Commissioning 27
4.4.1 Commissioning of the Quadra Inside SL 27
4.4.2 Refilling the burner 29
4.4.3 Taking out of operation safely 30
5. Cleaning and care 30
5.1 Cleaning cladding parts 30
6. Maintenance/troubleshooting 30
6.1 Furniture and glass becomes sooted heavily, rapidly and unevenly. 30
6.2 Fire is difficult to ignite 30
6.3 Unpleasant odours 31
6.4 Change in appearance of flames 31
6.5 Spilt ethanol ignites 31
7. General warranty conditions 31
7.1 Range of application 31
7.2 General information 31
7.3 Warranty period 31
7.4 Warranty requirements 32
7.5 Exclusions from the warranty 32
7.6 Elimination of defects / repair 32
7.7 Extension to the warranty period 32
7.8 Spare parts 32
7.9 Liability 33
7.10 Closing remarks 33
8. Declaration by builder of a bespoke furniture item or
fireplace insert with Quadra Inside 34

GB 4
IMPORTANT INFORMATION
As per the German Equipment and Product Safety Act (GPSG) and our statutory duty to notify, we would like to inform you about heating with this product.
As per our statutory duty to notify, we would like to inform you about heating with this product: The Bio chimney combustion heat with:
• Quadra Inside I SL – 0.5 l / hr amounts to approx. 3300 Watts
• Quadra Inside II SL – 1.0 l / hr amounts to approx. 6600 Watts
• Quadra Inside III SL – 1.5 l / hrs measures approx. 9900 Watts
The calorific value of 96.6% ethanol equates to approx. 29,600 kJ / kg. With fuel consumption in the:
• Quadra Inside I SL (0.5 l/hr approx. 0.4 kg/hr) = heat released approx. 3300 Watts
• Quadra Inside II SL (1.0 l/hr approx. 0.8 kg/hr = heat released approx. 6600 Watts
• Quadra Inside III SL (1.5 l/hr approx. 0.8 kg/hr = heat released approx. 9900 Watts
However, the decorative fireplace requires a plentiful supply of fresh air when operated as otherwise the amount of carbon dioxide created exceeds the permitted
concentration in the room air.
As a rule, the fresh air supplied is cooler than the room air to be heated up which results in a loss of energy. The effective heat output of a biofuel fireplace is thus
minimal and, as such, decorative fireplaces which use biofuel are not sources of heat.
This is a decorative fireplace that is not intended for heating or continuous operation. Nevertheless, it should be taken into account that heat is generated as a
by-product of the combustion process. This can cause increased heating in the room where the fireplace is installed. Read the safety instructions and measures for
rear ventilation carefully.
Observe these operating instructions.

GB
GB 5
1. GENERAL INSTRUCTIONS
Small children, older or frail persons: As is the case with all heaters, it
makes sense to install a safety device for these person groups. Danger
of burn injuries! Never leave these groups of persons unattended near
the stove when an ebios-fire is burning or has just been extinguished! The
ebios-fire must not be operated without supervision!
State-specific and local directives and regulations, in particular the fire
safety regulations of the German Federal State or the Association of Swiss
Canton Fire Insurance companies (VKF) must be complied with for the set-
up and operation of your ebios-fire.
The ebios-fire Quadra Inside units are tested in accordance with the very
latest safety standards and represent state-of-the-art technology.
During installation, ensure that the stipulations in this installation manual
are followed accurately. Select the installation location to assure compli-
ance with the rear ventilation and fire safety measures described in this
manual. The installation location must ensure that the burner does not move
in response to jolts or similar events while it is operating.
The ebios-fire Quadra Inside is designed for bespoke or 'individual' instal-
lations. The builder of the fireplace is responsible for complying with the
stipulations governing operational and fire safety, and for checking this at
the commissioning stage. (on this subject, refer to 4. Safety assessment)
All models may only be operated with the closed housing cover.
Please note that fuel must not be refilled while the appliance
is still hot or while a fire is still burning. NEVER fill at the
burner channel. Instead, ONLY refill it via the filling opening!
We recommend that you put out the ebios-fire by running it until the fuel
tank runs dry. When not in use, the cover plates must always be placed
over the burner.
Only permit people to fill the equipment with fuel who are familiar with the
equipment and with the
safety requirements, and who have received instructions from you in the
operation of this appliance.
The ebios-fire is not a heater but a decorative fire.
Bioethanol is a dangerous substance and must only be stored in the speci-
fied quantities as per the regulations:
Storage in a cellar: max. 20 litres
Storage in the living room: max. 5 litres
1.1 SPECIAL NOTES ON INSTALLATION
QUADRA INSIDE II SL & III SL
Due to their design, the models Quadra Inside II & III are classified in Ger-
many as heating appliances, and therefore as fireplaces for which official
approval is required. Obtain advice in advance about construction legislation
provisions and stipulations governing the installation of this heating appli-
ance. Please direct any questions you may have to your district chimney
sweep. In addition, national and European standards, the respective state-
specific and local directives and regulations, in particular the respective
firing installation ordinance must be followed.

GB 6
2 SCOPE OF DELIVERY
ebios-fire with the following features:
• 1 x housing Quadra Inside I SL, II SL, III SL
• Inside I SL 1 x ethanol burner EB 500
• Inside II SL 2 x ethanol burner EB 500
• Inside III SL 3 x ethanol burner EB 500
• Ethanol burner EB 500 comprising:
• Safety pan
• Tank with burner channel
• Burner fleece
• Filler aperture
• Fill level indicator
• Cover plate
• Key (tank seal)
• 1 x cold hand
• Ethanol canister (Inside I SL, 1 x, Inside II SL, 2 x, Inside III SL, 3 x)
• 1 x pouring cock on each canister
• 1 x funnel
• 1 x bottle for coating
Here is an example of the Quadra Inside I SL
Item Designation Pos. Designation
AHousing HFilling opening
BBurner fleece ICold Hand
CBurner channel KKey (tank seal)
DCover plate LBottle for wetting the burner
EStick lighter M5L ethanol canister
FTank NPouring cock
GFill level indicator
3. ASSEMBLY INSTRUCTIONS
Please follow the information below carefully. Bear in mind that bioethanol
is a liquid fuel which is highly flammable and which results in high local
temperatures when burnt. Failure to comply with the instructions for instal-
lation and operation can result in dangerous situations and even explosion
of the fuel. Proper installation and handling ensure safe and reliable opera-
tion. The device must not be able to tilt and must be positioned horizontally.

GB
GB 7
3.1 TECHNICAL DATA
3.1.1 QUADRA INSIDE SL
Quadra Inside I SL
Fuel type Bioethanol
(ethanol content 96.6%)
Fill quantity Max. 2.6 litres
Fuel consumption 0.5 l/h
Combustion duration Approx. 5 h*
Temperature in the tank < 65°C
Weight of the burner (empty) with cover plate 5.3 kg
Minimum room volume ** 84 m³ 167 m³ 418 m³
Air exchange at air exchange rate ** 10.5 0.2
Corresponding room size with room height of 2.5 m ** 34 m² 67 m² 167 m²
As a rough guide, the following air exchange rates1)are named:
Air change [1/hr] Comments
0…0.5 Windows and doors closed
0.3…1.5 Window tilted, no roller blinds
5…10 Window half open
1) Recknagel, Sprenger, Schrameck: Heizung+Klimatechnik, Oldenbourg Verlag
** Please note that the luminosity of the flame can decrease to such an
extent that the flame is no longer clearly visible. Make your children and
others in the home aware of this.
** These details relate solely to the combustion air requirements of the
ebios-fire. If other air-consumers (e.g. closed flue fireplaces such as
stoves or central heating, fume extractor hoods with an external connec-
tion, ventilation systems etc.) are located in the installation room, these
must be taken into account separately.
Model Quadra Inside I SL
Placement Installation in combustion chamber of a fireplace insert
Installation in a bespoke furniture item
Number of burners 1
Width in mm 665
Depth in mm 233
Height in mm 102 (without protective panes) / 225 (with protective panes)
Weight in kg approx. 18.5 kg
Illustration of the Quadra Inside I SL:
Locating surface

GB 8
3.1.2 QUADRA INSIDE II SL
Quadra Inside II SL
Fuel type Bioethanol
(ethanol content 96.6%)
Fill quantity Max. 2.6 litres
Fuel consumption 0.5 l/h
Combustion duration Approx. 5 h*
Temperature in the tank < 65°C
Weight of the burner (empty) with cover plate 18.5 kg
Minimum room volume ** 168 m³ 334 m³ 836 m³
Air exchange at air exchange rate ** 10.5 0.2
Corresponding room size with room height of 2.5 m ** 68 m² 134 m² 334 m²
As a rough guide, the following air exchange rates1) are named:
Air change [1/hr] Comments
0…0.5 Windows and doors closed
0.3…1.5 Window tilted, no roller blinds
5…10 Window half open
1) Recknagel, Sprenger, Schrameck: Heizung+Klimatechnik, Oldenbourg Verlag
** Please note that the luminosity of the flame can decrease to such an
extent that the flame is no longer clearly visible. Make your children and
others in the home aware of this.
** These details relate solely to the combustion air requirements of the
ebios-fire. If other air-consumers (e.g. closed flue fireplaces such as
stoves or central heating, fume extractor hoods with an external connec-
tion, ventilation systems etc.) are located in the installation room, these
must be taken into account separately.
Model Quadra Inside II SL
Placement Installation in combustion chamber of a fireplace insert
Installation in a bespoke furniture item
Number of burners 2
Width in mm 1198
Depth in mm 233
Height in mm 102 (without protective panes) / 225 (with protective panes)
Weight in kg approx. 33 kg
Illustration of the Quadra Inside II SL:
Locating surface

GB
GB 9
3.1.3 QUADRA INSIDE III SL
Quadra Inside III SL
Fuel type Bioethanol
(ethanol content 96.6%)
Fill quantity Max. 2.6 litres
Fuel consumption 0.5 l/h
Combustion duration Approx. 5 h*
Temperature in the tank < 65°C
Weight of the burner (empty) with cover plate 28.5 kg
Minimum room volume ** 252 m³ 501 m³ 1254 m³
Air exchange at air exchange rate ** 10.5 0.2
Corresponding room size with room height of 2.5 m ** 102 m² 201 m² 501 m²
As a rough guide, the following air exchange rates1) are named:
Air change [1/hr] Comments
0…0.5 Windows and doors closed
0.3…1.5 Window tilted, no roller blinds
5…10 Window half open
1) Recknagel, Sprenger, Schrameck: Heizung+Klimatechnik, Oldenbourg Verlag
** Please note that the luminosity of the flame can decrease to such an
extent that the flame is no longer clearly visible. Make your children and
others in the home aware of this.
** These details relate solely to the combustion air requirements of the
ebios-fire. If other air-consumers (e.g. closed flue fireplaces such as
stoves or central heating, fume extractor hoods with an external connec-
tion, ventilation systems etc.) are located in the installation room, these
must be taken into account separately.
Model Quadra Inside III SL
Placement Installation in combustion chamber of a fireplace insert
Installation in a bespoke furniture item
Number of burners 3
Width in mm 1711
Depth in mm 233
Height in mm 102 (without protective panes) / 225 (with protective panes)
Weight in kg approx. 47.5 kg
Illustration of the Quadra Inside III SL:
Locating surface

GB 10
3.2 CERAMAT FN BURNER FLEECE
The CERAMAT FN burner fleece (black) included should only be touched
when wearing gloves as there is otherwise a risk of skin irritations. The
material can be easily damaged. For this reason, you should not bend or fold
the fleece, nor perform any similar action to it.
3.3 BASIC INSTALLATION REQUIREMENTS
All the relevant national and European standards as well as the local regula-
tions (fire protection regulations etc.) must be observed and applied during
installation and operation of the ebios-fire! The list of regulations given
below is not exhaustive.
BetrSichV Operational safety ordinance
Vbf Flammable liquids directive
BsV Fire protection directive of the relevant German federal state (Bundesland)
LBO Federal state construction directives
GefStoffV Hazardous substances directive
The ebios-fire may only be set up in rooms and locations where there are no
hazards due to the site, structural conditions and type of use. The floor area
of the installation must be of a design and size such that the ebios-fire can
be operated properly and as intended.
Only permitted and sufficiently strong transport aids may be used to trans-
port the ebios-fire.
The following points must be noted to ensure safe and problem-free
transport.
• Transport aids (if required), specifically barrows must only be used to
support the ebios-fire from the back.
• There must be no fuel in the tank during transportation.
DAMAGE DURING TRANSIT should be reported immediately to your supplier.
Protect the cladding and visible elements of the fireplace furniture from
soiling and damage during installation and transportation.
3.4 INSTALLATION SITE
Your ebios-fire must not be installed:
1. In stairways, unless they are in residential buildings with two or fewer
flats.
2. In hallways with general access.
3. in garages.
4. In rooms in which highly combustible or potentially explosive substances
or mixtures are processed, stored or manufactured in quantities that
would be hazardous in the event of ignition or explosion.
5. In insufficiently ventilated rooms.

GB
GB 11
6. In areas accessible to the public which are not supervised.
7. In areas which are not protected against transverse ventilation
8. On tables, pieces of furniture, shelves etc.
3.5 INSTALLATION/ASSEMBLY
The ebios-fire Quadra Inside appliances are turnkey units for installation
in the cover plate of a bespoke furniture item (combustible materials) or
in a tailor-made open fireplace (non-combustible materials). No flue gas
extraction is required for bespoke fireplaces featuring the Quadra Inside SL.
The ebios-fire furniture item, which may be free-standing or wall-mounted,
must be aligned horizontally and secured to prevent tilting. Rear ventilation
must not be closed. Place the burner with reactor containment and cover
plate into the receiving units provided in the Quadra Inside. Floor-mounted
furniture may only be set up on floors with sufficient load-bearing capacity.
If the load bearing capacity is not sufficient, suitable measures must be
taken (e.g., plate for load distribution) to remedy this. Use suitable fasten-
ing material (wall plugs, screws etc.) when securing to the wall.
NO design modifications whatsoever are permitted to the design of the
Quadra Inside SL models.
3.6 GENERAL NOTES FOR INSTALLATION IN BESPOKE
FURNITURE ITEMS
• In all cases involving bespoke furniture design for installation with
Quadra Inside SL, they at least comprise a cover plate/table-top and a
housing area with an additional air intake. No housing area is needed for
table-top installations, but it would be advisable to have one.
• During installation in a bespoke furniture item (combustible materials),
always bear in mind that the Quadra Inside must NOT be installed in a
furniture niche. Risk of fire!
• There must be no objects between the Quadra Inside SL and room ceil-
ing (distance to the ceiling >1000 mm)!
• The Quadra Inside SL may only be installed in the cover plate / table-
tops of a furniture item. (example: bureau, sideboard, pull-out cabinet,
table)
• The Quadra Inside must always be bolted to the cover plate / table-top.
• The furniture items must always be securely mounted to the wall or
to the floor and secured to prevent any accidental movement, toppling
and/or lifting action. For this, appropriate fastening material must be
selected.
• All inlet apertures and rear ventilation features must be left unob-
structed, and must not be blocked since otherwise a heat build-up would
take place. Risk of fire!

GB 12
• Here are the minimum cross sections of free aperture for additional air
in furniture items:
• Quadra Inside I SL 200 cm²
• Quadra Inside II SL 400 cm²
• Quadra Inside III SL 600 cm²
• The rear ventilation features must be dimensioned appropriately.
• The area below the Quadra Inside housing (housing area) must not be
used as a storage area. Storage area and housing area must be sepa-
rated by a partition floor panel and a back wall.
1Quadra Inside SL 5Wall mounting
2Cover plate / table-top 6Rear ventilation
3Housing room 7Air inlet opening
4Storage room
• With open table furniture items, always ensure that the apertures in the
underside of the Quadra Inside SL housing are not obstructed by objects.
min.
Example of pull-out cabinet
No objects are permitted
under open table-top
furniture items.
An example of an open table-top furniture
item

GB
GB 13
3.6.1 MINIMUM DIMENSIONS FOR FURNITURE
CONSTRUCTION
3.6.1.1 QUADRA INSIDE I SL
• The minimum dimension for the cover plate / table-top (Fig. 4) is at least
738 x 333 mm (width x depth).
• The cutaway for the Quadra Inside I SL measures 689 x 224 mm and it
is cut centrally into the cover plate / table-top.
1Quadra Inside I SL
2Cover plate / table-top
• The minimum distance between housing and base of housing area (Fig.
5) measures 70 mm.
• Ensure that additional air can flow into the housing area without
obstruction. Free cross section for additional air is 200 cm². To this end,
appropriate inlet apertures must be provided.
3.6.1.2 QUADRA INSIDE II SL
• The minimum dimension of the cover plate / table-top (Fig. 6) measures
at least 1250 x 400 mm (width x depth).
• The cutaway for the Quadra Inside II SL measures 1188 x 223 mm and
is cut centrally into the cover plate / table-top.
1Quadra Inside II SL
2Cover plate / table-top
• The minimum distance between housing and floor of housing area (Fig.
7) measures 70 mm.
• Ensure that additional air can flow into the housing area without obstruc-
tion. Free minimum cross section for additional air measures 400 cm².
To this end, appropriate inlet apertures must be provided.
Fig. 4 Minimum dimensions of upper/table-top plate
Fig. 5 Minimum dimensions for housing space
min.
min.
Fig. 6 Minimum dimensions for upper/table-top plate
min.
min.
Fig. 7 Minimum dimensions of housing space

GB 14
3.6.2 INSTALLATION OF QUADRA INSIDE I / II / III SL
• The Quadra Inside must be installed and
aligned in the prefabricated aperture in the
cover plate / table-top.
• Open the housing cover as follows:
• After this, the housing with cover plate /
table-top is bolted firmly to the 6 spacer
brackets with 6 screws. For this, appropri-
ate fastening screws must be selected.
• Install the burner in the housing.
3.6.1.3 QUADRA INSIDE III SL
• The minimum dimension of cover plate / table-top (Fig. 8) measures at
least 1751 x 400 mm (width x depth).
• The cutaway for the Quadra Inside III SL measures 1701 x 223 mm and
is cut centrally into the cover plate / table-top.
1Quadra Inside III SL
2Cover plate / table-top
• The minimum distance between housing and housing area base (Fig. 9)
measures 70 mm.
• Ensure that additional air can flow into the housing area without obstruc-
tion. Free minimum cross section for additional air is 600 cm². For this,
appropriate additional air apertures must be provided.
Fig. 8 Minimum dimensions for upper/table-top plate
Fig. 9 Minimum dimensions for housing space
min. min.

GB
GB 15
• Close the housing cover on the Quadra Inside. Please note the correct
placement to ensure that a uniform air gap appears between housing
cover and flame area (see Fig. 10, 11 and 12) to assure a sufficient
supply of air. Otherwise the housing cover can become covered in soot
and the flames may no longer be uniform in appearance.
Quadra Inside I SL
• Then the 4 protective panes are installed.
Quadra Inside II SL
• Then the 6 protective panes are installed.
Quadra Inside III SL
• Then the 8 protective panes are installed.
Fig. 10 Air gap approx. 9 mm (without cover plate)
Fig. 11 Air gap approx. 9 mm (without cover plate)
Fig. 12 Air gap approx. 9 mm (without cover plate)

GB 16
3.6.3 FIRE PROTECTION/MINIMUM DISTANCES DUR-
ING THE SET-UP OF FURNITURE
When installing a bespoke furniture unit against a wall, a minimum distance
of 50 mm from that wall, i.e. behind the unit, must be maintained, and to
either side. The reference point is the installation frame of the Quadra Inside
housing (see Figs. 13 to 24).
Quadra Inside I SL
• In order to guarantee sufficient thermal insulation, there must be a
minimum distance of 1000 mm (see Fig. 16) to flammable components,
furniture, decorations and curtains at the side! There must be no objects
between the ebios-fire furniture item and the room ceiling (distance to
the ceiling >1000 mm) (see Fig. 15)!
min. 1000 (distance from ceiling)
Fig. 15 Minimum distance from ceiling
Fig. 14 Minimum distances in a room corner
min.
min.
Fig. 16 Minimum distances from combustible components
min. min.
min.
Fig. 13 Minimum distances to wall
min. 50
min.

GB
GB 17
Quadra Inside II SL
• In order to guarantee sufficient thermal insulation, there must be a
minimum distance of 1000 mm (see Fig. 20) to flammable components,
furniture, decorations and curtains at the side! There must be no objects
between the ebios-fire furniture and room ceiling (distance to the ceiling
>1000 mm) (see Fig. 19)!
Fig. 17 Minimum distances from wall
min.
min.
Fig. 18 Minimum distances in a room corner
min.
min.
min. 1000 (distance from ceiling)
Fig. 19 Minimum distance from cover
Fig. 20 Minimum distances from combustible components
min. min.
min.

GB 18
Quadra Inside III SL
• In order to guarantee sufficient thermal insulation, there must be a
minimum distance of 300 mm (see Fig. 24) to flammable components at
the side, furniture, decorations and curtains! There must be no objects
between the ebios-fire furniture and the room ceiling (distance to the
ceiling >1000 mm) (see Fig. 23)!
Fig. 22 Minimum distances in a room corner
Fig. 21 Minimum distances from wall
min.
min.
min. 1000
(distance from ceiling)
Fig. 23 Minimum distance from ceiling
Fig. 24 Minimum distances from combustible components
min.
min.
min.

GB
GB 19
3.7 GENERAL NOTES ON INSTALLATION IN OPEN
FIRE AREAS / FIREPLACE INSERTS BUILT BY
CRAFTSMEN
• A bespoke, open fire area always comprises the combustion chamber,
the housing area with air inlet and the insulation or, where applicable,
front-mounted masonry.
• The combustion chamber must NOT be sealed with a firebox door.
• All inlet apertures and rear ventilation features must be left unob-
structed, and must not be blocked since otherwise a heat build-up would
take place. Risk of fire!
• The minimum cross section at the free aperture for additional air in a
furniture unit measures:
Quadra Inside I SL – 200 cm²
Quadra Inside II SL – 400 cm²
Quadra Inside III SL – 600 cm²
• The rear ventilation features must be dimensioned appropriately.
• The Quadra Inside models must be secured to the base of the com-
bustion chamber (support panel in the Quadra Inside models) using 6
appropriate screws.
• The floor plate of the combustion chamber (with a cutaway for the
Quadra Inside) must be dimensioned appropriately.
Variants of open fireplace inserts: Quadra Inside I SL
Variants of open fireplace inserts
AFront variant
BCorner variant, left
CCorner variant, right
DThree-sided open variant
ETransparent variant
Fig. 25

GB 20
Variants of open fireplace inserts: Quadra Inside II SL
Variants of open fireplace inserts
AFront variant
BCorner variant, left
CCorner variant, right
DThree-sided open variant
ETransparent variant
Variants of open fireplace inserts: Quadra Inside III SL
Variants of open fireplace inserts
AFront variant
BCorner variant, left
CCorner variant, right
DThree-sided open variant
ETransparent variant
Fig. 26
Fig. 27