Spear & Jackson Q1W-SP07-1800 User manual

IN THE BOX
LACK OF PRESSURE?
REMOVE POSSIBLE AIRLOCKS!
RECONNECT WATER HOSE FOLLOWING INSTRUCTIONS
1
6
7
8
9
10
11
13
14
5
3
4
12
2
High pressure washer
Gun storage
Handle
Patio cleaner
Extend lance for patio cleaner
Fix brush
Turbo lance
Adjustable spray lance
Spray gun
Screws 4pcs
Water inlet male connector
Nozzle pin
Manual
High pressure hose
1
9
2
10
3
11
4
12
5
13
6
14
7
8
Important - Please read these instructions
fully before starting assembly
These instructions contain important information that will help
you get the best from your pressure washer, ensuring it is assembled
correctly and safely. If you need help or have damaged or missing parts,
call the Customer Helpline on 0345 605 2067
AFTER SALES SUPPORT
0345 605 2067
1800W
High
Pressure Washer
Q1W-SP07-1800
QUICK START
GUIDE

ASSEMBLE PREPARE OPERATE
Connect garden hose (non-supplied)
and water supply. Let the water run
through the hose and turn it off.
Install the inlet male connector,
connect garden hose and inlet
connector, and turn the water on.
Turn on the pressure washer. Turn the nozzle to the desired
spray width and pull the trigger on
the spray gun to release a
pressured water spray.
Detergent can only be used in
combination with the adjustable
spray lance in the low pressure setting.
Detergent can't be used with turbo
lance
Special pressure washer
detergents can be used to increase
the cleaning power of the pressure
washer.
Makes sure the ON/OFF switch is
in the OFF position.
Unlock the safety trigger on the
spray gun and press the trigger to
pull the water through the machine,
until a steady stream of water runs
from the lance.
Connect to mains power. We
recommend to use a RCD device.
81 2
3 4
5
6
7
9
10 11
12
13 14
15 16
17
√
X
Jet spray adjustment is very
aggressive. Do not adjust while
spraying. Switch the machine off
when interrupting your work for
extended periods of time.