Spear & Jackson Q1W-SP15-1900 User manual

IN THE BOX
1
2
3
14
17
4
5
6
7
8
9
10
11
12
13
15
16
High pressure washer
Gun storage
Reel handle
Patio cleaner
Extend lance for patio cleaner
Rotary brush
Turbo lance
Vario lance
Trigger gun
Screws 2pcs
Inlet adapter
Top handle
Manual
Hose clip
19
210
311
412
513
614
15
16
Reel handle
17
7
8
Fix brush
Nozzle pin
LACK OF PRESSURE?
REMOVE POSSIBLE AIRLOCKS!
RECONNECT WATER HOSE FOLLOWING INSTRUCTIONS
Important - Please read these instructions
fully before starting assembly
These instructions contain important information that will help
you get the best from your pressure washer, ensuring it is assembled
correctly and safely. If you need help or have damaged or missing parts,
call the Customer Helpline on 0345 605 2067
AFTER SALES SUPPORT
0345 605 2067
2000W
High
Pressure Washer
Q1W-SP15-1900
QUICK START
GUIDE

ASSEMBLE PREPARE OPERATE
Install the inlet male connector,
connect garden hose and inlet
connector, and turn the water on.
Power on the pressure washer. Turn the nozzle to the desired
spray width and pull the trigger on
the spray gun to release a
pressured water spray.
Detergent can only be used in
combination with the adjustable
lance in the low pressure setting.
Detergent can't be used with turbo
lance.
Special pressure washer
detergents can be used to increase
the cleaning power of the pressure
washer.
Makes sure the ON/OFF switch is
in the OFF position.
Unlock the safety trigger on the
spray gun and press the trigger to
pull the water through the machine,
until a steady stream of water runs
from the lance.
Connect to mains power. We
recommend to use a RCD device.
89
10
1 2
3 4
A
A
B
5
7
6
11
12
13 14
15 16
17
√
X
10
4
5
10
10
9
8
6
7
B
Connect garden hose (non-sup-
plied) and water supply. Let the
water run through the hose and
turn it off.
Jet spray adjustment is very
aggressive. Do not adjust while
spraying.
Switch the machine off when
interrupting your work for
extended periods of time.
ON