Spear & Jackson HTEG47A-660 User manual

IN THE BOX
Important - Please read these instructions
fully before starting assembly
These instructions contain important information that will help
you get the best from your trimmer, ensuring it is assembled correctly
and safely. If you need help or have damaged or missing parts,
call the Customer Helpline on 0345 605 2067
AFTER SALES SUPPORT
0345 605 2067
600W
Electric
Hedge Trimmer
HTEG47A-660
QUICK START
GUIDE
6 7
8
10
9
11
5
4
3
2
1
Cutting blades
Front guard
Front handle
Safety switch
Air vents
Handle adjustment unlock button
Rear handle
On/off switch
Power cord with plug
Cord strain relief
Blade sheath
1
8
7
2
93
104
115
6

ASSEMBLE PREPARE OPERATE
Remove the blade sheath (11)
from the blade (1) of appliance
carefully .
123 4
4
5
Important! After each use, always
clean the blade, and lubricate the
blade.
1
11
Adjust the handle to fit the
application.
Press and hold the unlock
button (6) at both sides.
Adjust the handle (7) to the
required position and release the
unlock button (6). Keep turning
the (7) handle until it snaps
securely into place.
Switching on/off
i. Hold the product with one
hand at the rear handle (7) and
with the other at the front handle
(3).
ii. Press the on/off switch (8) and
the safety switch (4) at the same
time to switch the product on.
iii. Release either the on/off
switch (8) or the safety switch (4)
to switch the product off.
Double the cord, about a foot
from the end. Lead the loop
through the hole on the rear safe
guard and hook the loop over
the cord strain relief (10). Gently
pull on the cord to ensure that it
is firmly attached.
4
Connect the plug of the cable to
the mains socket.
7
6
6
10
7
8
4
3