Spear & Jackson S3525ET User manual

IN THE BOX
10m cable
Main handle
On/off Switch
Cable retainer
Front handle
Locking sleeve length adjustment
Guard
Plant protector
Tilt adjustment pedal
Pole
Knob
Angle adjustment button
Cable collector
Support wheel
Spare spool
9
10
11
12
13
14
15
1
2
3
4
5
6
7
8
3
2
5
15
6
8
9
4
1
7
14
13
10
12
11
Important - Please read these instructions
fully before starting assembly
These instructions contain important information that will help
you get the best from your trimmer, ensuring it is assembled correctly
and safely. If you need help or have damaged or missing parts,
call the Customer Helpline on 0345 605 2067
AFTER SALES SUPPORT
0345 605 2067
350W
Electric
Grass Trimmer
S3525ET
QUICK START
GUIDE

ASSEMBLE PREPARE OPERATE
Fold the plant protector out
for trimming / edging operation
Hold the trimmer head just
above the ground at an angle
of approximately 30°
DO NOT cut long grass in
one cut, as this will damage
your grass trimmer,
and make your warranty invalid.
When cutting longer /high grass,
please make sure that
you cut this down in 2 to 3 stages.
Safety guard assembly
(four screws are pre-assembled
on motor housing)
Front handle assemble
Plant protector assemble
Height adjustment Handle adjustment
Tilt adjustment Edging position
Edging position Lead the loop through the hole
on the rear safe guard and hook
the loop over the cord strain relief
Connect to main supply
1 2
3
4 5
6 7
9
8
10
12
90o
90o
10
9
30o
11