Specialized Turbo SL Owner's manual

Ship to Home:
TURBO/ TURBO SL ASSEMBLY
SUPPLEMENTARY INFORMATION

With the system powered on, the motor support will activate as soon as the cranks
are rotated and torque is detected. This can also happen when not actively riding
the bicycle, e.g., when the bicycle is in a work stand or flipped upside down and
the cranks are turned or the chain is moved (which then turns the cranks), when
walking alongside and pushing the bicycle and the cranks are turned, or any other
scenario where the cranks are turned, whether intentionally or unintentionally,
and the wheels are moving. What this means is that the system should be
powered off if motor assist is not desired to avoid any unintentional engagement
of the motor.
1. User Manual
2. Assembly guide
3. Owner’s Manual
4. Component manual
5. Pedals (Optional)
The following is supplementary to the Assembly Guide and
User Manual provided with your Specialized bike and should
be used in conjunction with those documents.
MOTOR SUPPORT AND ACTIVATION
WHAT’S IN THE SMALL PARTS BOX
i
WARNING!: Always turn the battery off when not in use and/or
when working on the bicycle.
!
6. Torque wrench (1-10 Nm)
7. 5mm Hex key/bit
8. 4mm Hex key/bit
9. Flat wrench
10. Specialized Turbo
battery charger

Use your smartphone camera to scan
the QR code for a comprehensive
assembly instruction video of your
bicycle in your language.
1. Open the camera app on
your phone.
2. Focus the camera on the QR code
by gently tapping the code.
3. Follow the instructions on the
screen to complete the action.
ASSEMBLY INSTRUCTION VIDEO
Assembly
instructions

CHARGING THE BATTERY
Your bicycle will arrive with a battery that is only partially charged.
Before your first ride, you should give it a full charge. Please refer to the
User Manual supplied with your bicycle for important safety information
and instructions on how to properly charge your battery.
Make sure you read it in its entirety.
While charging, if the rear wheel speed sensor magnet passes the speed
sensor, the battery will go into a safe state and stop charging. To avoid
interruption of the charging process, do not rotate the rear wheel during
charging. To resume charging, make sure the speed sensor magnet is not
located near the sensor magnet in the dropout and initiate charging again
by disconnecting and re-connecting the charger connector.
WARNING!: Do not move the bike or rotate the crank arms when the
charger is connected. This can cause damage to the charger plug and/ or
charge port, should the crank arm hit the connector.
!
i

To get the most out of your new
Specialized Turbo E-Bike download
and connect to Mission Control in
the app store.
MISSION CONTROL APP
Depending on the model, the bicycle is equipped with either a TCU (A) or
a MasterMind TCU (B).
1. Power up the bicycle using the power button on the TCU.
2. Follow the steps shown in the bicycle’s User Manual to connect the bicycle
to the Mission Control app and complete online rider registration.
CONNECT TO MISSION CONTROL
Download Mission
Control from the
App Store
Get the most out
of Mission Control

Register your bike to unlock Lifetime warranty* against structural defects
in material or workmanship on ALL models of Specialized-branded
frames and forks.
This can be done in the Mission Control App or on Specialized.com. You will need
the serial number to register. For bikes, the serial number is located on a sticker
on the underside of your top tube and/or downtube as well as on the underside
of your bike, underneath the bottom bracket. Specialized serial numbers typically
start with the prefix “WSBC,” “WUD,” “STT,” or “STE”.
Follow these steps:
In the Mission Control App:
1. Connect your bike to Mission Control.
2. Once paired, tap the cog wheel to access the bike’s settings.
3. Tap ‘Register Bike’ and follow the steps in the App.
On Specialized.com:
1. Go to Specialized.com/register.
2. Sign in or create an account.
3. Navigate to ‘Registered Bikes’ on the menu.
4. Click ‘Register Bike’ and follow the steps online.
UNLOCK LIFETIME WARRANTY*