Speco HLPR1G User manual

INSTRUCTION
MANUAL
2MP TVI LPR Camera
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specications without notice and without incurring any obligation.
Rev. 07/01/2020
HLPR1G
(IR Bullet Camera)
EN771T IMX323_speco LPR.indd 1 2020-07-22 오후 3:20:16

Contents
- 2 -
◑
Contents...................................................... 2
◑
Precautions ................................................. 3, 4
◑
Safety Instructions ...................................... 5
◑
Package Contents....................................... 6
◑
Camera Installation ..................................... 7-9
◑
Specications.............................................. 10
◑
Camera Dimension ..................................... 11
◑
Features...................................................... 12
◑
OSD Menu Details ...................................... 13- 26
◑
Trouble Shooting......................................... 27
EN771T IMX323_speco LPR.indd 2 2020-07-22 오후 3:20:16

- 3 -
Precautions
Do not install the camera in
extreme temperature conditions.
Do not touch the front lens of the
camera.
Never keep the camera pointed
directly at strong light.
Do not expose the camera to
radioactivity.
Do not install the camera under
unstable lighting conditions.
Do not drop the camera or subject
it to physical shocks.
Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially careful to
provide ventilation when operating under
high temperatures.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
It can cause malfunctions to occur. If exposed to radioactivity the CCD
will fail.
Severe lighting change or flicker can
cause the camera to work improperly.
Housing damage can compromise
weatherproof ratings.
NOTE
* If the camera is exposed to spotlight or object reflecting
strong light, smear or blooming may occur.
* please check that the power satisfies the normal
specification before connecting the camera.
EN771T IMX323_speco LPR.indd 3 2020-07-22 오후 3:20:20

- 4 -
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION : To prevent electric shock and risk of fire hazards:
ō Do NOT use power sources other than those specified.
WARNING - To prevent electric shock and risk of fire hazards:
୛Do NOT use power sources other than that specified.
୛Do NOT expose this appliance to rain or moisture.
In USA and Canada, Use Class 2 Power Supply Only
EN771T IMX323_speco LPR.indd 4 2020-07-22 오후 3:20:23

- 5 -
Safety Instructions
Precautions for use
Please handle this camera carefully :
◑ This camera should be installed by qualied personnel only
◑ There are no user serviceable parts inside
◑ Do not disassemble this camera other than to make initial adjustments
◑ Use a UL approved regulated 24 volt AC or 12 volt DC power supply
◑
Use appropriate low voltage power cable to prevent re or electrical shock
◑
Please insure that your installation area can support the weight of the camera
◑ Do not use a strong or abrasive detergent when cleaning the camera
◑Do not install near cooling or heating device
EN771T IMX323_speco LPR.indd 5 2020-07-22 오후 3:20:23

- 6 -
Package Contents
Please make sure that the following items are included in the Package:
1) HLPR1G Included Junction Box
●1 Power Jack
●1 Mount Base Sticker
●1 Wrench
●Set Screw
- 3 Tapping Screws 4x25
- 4 Hexagon Socket Screws M4x14
- 3 Plastic Anchor
EN771T IMX323_speco LPR.indd 6 2020-07-22 오후 3:20:23

- 7 -
Camea Installation
EN771T IMX323_speco LPR.indd 7 2020-07-22 오후 3:20:24

- 8 -
Camea Installation
Compatibility
1) HLPR1G
INTCM
EN771T IMX323_speco LPR.indd 8 2020-07-22 오후 3:20:25

Camea Installation
- 9 -
1. HLPR1G
WALL
ANCHOR, WHT, 6X30, PLASTIC, 4EA
JUNCTION BOX
SCREW-TAP, SLV, SUS, BH_4X25, TP1, 3EA
SCREW-MS, WHT, SUS, PH_M4X10, 3EA
SCREW-MS, WHT, SUS, PH_M4X14, 4EA
EN771T IMX323_speco LPR.indd 9 2020-07-22 오후 3:20:26

- 10 -
SPECIFICATIONS
■HLPR1G (5-50mm)
● 5-50mm motorized auto iris varifocal lens, (10x auto focus / zoom)
● High-contrast imaging performance that delivers sharp, clear license-plate
captures
● Full HD 1080p over coax (HD-TVI)
● Supports full UTC control over coax for Zoom / Focus and camera's OSD
● Captures license plates up to 40 mph
● IP66 compliant, weather resistant
2MP TVI LPR Camera
5-50mm Motorized Lens
Image sensor
Resolution
Frame rate
Scanning system
Min. illumination
Video Output
S/N Ratio
Lens
Function
Power Consumption
Operating Temperature
Storage Temperature
Dimensions
Weight
Sensor type
Effective pixels
Total pixels
Analogue
Analogue
Drive Type
AGC
Shutter Speed
Brightness
Sens-UP
WDR
BLC
HLC
ACE(D-WDR/ATR-EX)
Privacy Masking
DEFOG
Day & Night
Smart -IR
White Balance
DNR
Mirror
Sharpness
Gamma Correction
Language
1/2.9” SONY 2Mega Starvis CMOS Sensor
1985(H) X 1105(V), 2.19M Pixels
2001(H) X 1121(V), 2.24M Pixels
1080P / 720P / CVBS
NTSC 30P, PAL 25P
Progressive Scan
DAY : 0.5LUX (AGC MAX, SENS-UP OFF, F1.4)
NIGHT : 0.01LUX (AGC MAX, SENS-UP OFF, F1.4)
TVI, CVBS
More than 50dB
05~50mm Motorized Lens with Auto Focus
0 ~ 10 Level Adjustable
AUTO / FLK / MANUAL(1/30Sec ~ 1/30000Sec)
0 ~ 20 Level Adjustable
OFF / x2 ~ x32
OFF / ON : LOW/MIDDLE/HIGH / ROI WDR
OFF / ON
OFF / ON
OFF / ON(LOW/MIDDLE/HIGH)
OFF / ON (BOX : 16 Zone)
OFF / ON(LOW/MIDDLE/HIGH)
Auto(AGC) / COLOR / BW / EXTERN(Lux CTL, PWM CTL)
0~20 Level Adjustable
AUTO(1,700K ~ 11,000K) / AUTO ext / PRESET / MANUAL
OFF / LOW / MIDDLE / HIGH (2D+3DNR)
MIRROR / FLIP
0~10 Level Adjustable
0.45 ~ 0.75
ENG / KOR / JPN / CHN / CHN(S)
DC 12V : Max 9.3W / 0.77A, AC 24V : Max 8W / 0.6A
-10 ~ +50 Deg C. RH 95% Max.
-20 ~ +60 Deg C. RH 95% Max.
3.74"(W)*3.4"(H)*9"(D)
1.54Ibs
MODEL HLPR1G
EN771T IMX323_speco LPR.indd 10 2020-07-22 오후 3:20:28

- 11 -
Camera Dimension
1) HLPR1G
3.74” 9”
3.4”
EN771T IMX323_speco LPR.indd 11 2020-07-22 오후 3:20:29

- 12 -
General Features
●
Transfer Video Interface
The combination of a 2Mega CMOS image sensor and TVI DSP provides an excellent
resolution of TVI picture.
●
DNR
Smart DNR prevents the image blurring of moving object and activates only if moving
objects are appearing on the scene.
●
Smart-IR
No saturation image, vivid image in darkness! "TVI" camera makes very sharp video
image in darkness! This technology eliminates saturation of video image of the closer
object in darkness by control of the IR sensitivity. Saturation never happens in our
"TVI"cameras, you can enjoy vivid image in any dark condition!
●
Sens-Up
Despite a limited & low light condition, Sens-Up - Max. x32 helps the viewer to get
visible and clear images.
●
Defog
Defog function “improves” the clarity of images taken in poor conditions such as
fog, smoke, rain or snow.
●
WDR
A powerful and advanced technology that captures a high resolution picture even
where images appear dark.
●
CVBS(Composite Video Blanking and Sync)
TV system is switchable 'NTSC' or 'PAL' with built-in OSD.
●
Intelligent Function
An extraordinary technology that enables Speco Technologies TVI to become the
ultimate solution by providing intelligent features based on motion detection. It also
strengthens crime prevention and detection.
EN771T IMX323_speco LPR.indd 12 2020-07-22 오후 3:20:29

- 13 -
How to Set Up the camera menu
●
Setup Menu
MENU
1.2MOTOR
2.EXPOSURE
3.BACKLIGHT
4.DAY&NIGHT
AF MODE
SCANNING
ONEPUSHAF
SYNC TDN
INITIAL
RETURN (LEFT,RIGHT PUSH : EXIT----SAVE/EXIT----CANCEL)
BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN (LEFT,RIGHT PUSH : EXIT----SAVE/EXIT----CANCEL)
OFF
HLC
BLC
WDR
AUTO
COLOR
B&W
EXTERN
AUTO/MANUAL
HALF/FULL
ON-PUSHING
OFF/ON
ON-PUSHING
0~20 default : 10
AUTO
MANUAL
FLICKER
OFF, X2, X4, X8, X16, X32
0~10 default : 10
LEVEL
COLOR
RETURN (LEFT,RIGHT PUSH : EXIT----SAVE/EXIT----CANCEL)
H-POS
V-POS
H-SIZE
V-SIZE
RETURN (LEFT,RIGHT PUSH : EXIT----SAVE/EXIT----CANCEL)
MODE
WEIGHT
RETURN (LEFT,RIGHT PUSH : EXIT----SAVE/EXIT----CANCEL)
D -> N THRES
N -> D THRES
DELAY
RETURN (LEFT,RIGHT PUSH : EXIT----SAVE/EXIT----CANCEL)
SMART-IR
LED LEVEL
RETURN (LEFT,RIGHT PUSH : EXIT----SAVE/EXIT----CANCEL)
SMART-IR
GHOST_CAT
NORMAL/DEBLUE
1/30, 1/60, 1/120, 1/240, 1/480, 1/1000, 1/2000, 1/4000, 1/8000, 1/15000, 1/30000
0~20 default : 10
BLK/CUSTOMIZE/WHT/YEL/CYN/GRN/MAG/RED/BLU
0~20 default : 8
0~19 default : 7
0~20 default : 3
0~12 default : 3
NORMAL
ROI
LOW/MIDDLE/HIGH
0~20 default : 13
0~20 default : 3
LOW, MIDDLE, HIGH
0~20 default : 2
0~20 default : 9
0~20 default : 2
OFF
ON
WINDOW ZONE
WINDOW USE
H-POS
V-POS
H-SIZE
V-SIZE
RETURN (LEFT,RIGHT PUSH : EXIT----SAVE/EXIT----CANCEL)
DET WINDOW
DET TONE
SENSITIVITY
MOTION OSD
RETURN (LEFT,RIGHT PUSH : EXIT----SAVE/EXIT----CANCEL)
0 ~ 3 default : 3
ON/OFF
0 ~ 1920 default : 920
0 ~ 1080 default : 630
0 ~ 1920 default : 512
0 ~ 1080 default : 432
DET H-POS
DET V-POS
DET H-SIZE
DET V-SIZE
RETURN (LEFT,RIGHT PUSH : EXIT----SAVE/EXIT----CANCEL)
0 ~ 4 default : 4
0 ~ 10 default : 5
ON/OFF
0~60 default : 13
0~34 default : 6
0~60 default : 34
0~34 default : 22
MENU SETUP
EN771T IMX323_speco LPR.indd 13 2020-07-22 오후 3:20:29

- 14 -
How to Set Up the camera menu
●
Setup Menu
5.WHITE BAL
6.DNR
7.IMAGE
8.SYSTEM
9.EXIT
AUTO/AWB/AWC-SET ↓
MANUAL
OFF/LOW/MIDDLE/HIGH
SHARPNESS
COLOR GAIN
GAMMA
MIRROR
FLIP
ACE
DEFOG
PRIVACY
RETURN (LEFT,RIGHT PUSH : EXIT----SAVE/EXIT----CANCEL)
OUTPUT
FRAME RATE
FREQ
IMAGE RANGE
LANGUAGE
CAMTITLE
RESET
RETURN (LEFT,RIGHT PUSH : EXIT----SAVE/EXIT----CANCEL)
SAVE/CANCEL
LED LEVEL
D -> N THRES
N -> D THRES
DELAY
RETURN (LEFT,RIGHT PUSH : EXIT----SAVE/EXIT----CANCEL)
C-TEMP
R-GAIN
B-GAIN
RETURN (LEFT,RIGHT PUSH : EXIT----SAVE/EXIT----CANCEL)
0 ~ 10 default : 10
0 ~ 10 default : 10
0.45, 0.5, 0.55, 0.6, 0.65, 0.7, 0.75
ON/OFF
ON/OFF
OFF, LOW, MIDDLE, HIGH
ON
OFF
ON
OFF
RETURN (LEFT,RIGHT PUSH : EXIT----SAVE/EXIT----CANCEL)
TVI
CVBS
720-30P, 720-60P, 1080-30P
60Hz/50Hz
FULL
COMP
USER
ENG/KOR/CHN/CHN(S)/JPN
OFF/RIGHT UP/LEFT DOWN
ON-PUSHING
0~10 default : 10
0~20 default : 8
0~20 default : 15
LOW, MIDDLE, HIGH
3000K/5000K/8000K
0~20 default : 10
0~20 default : 10
MODE
LEVEL
RETURN (LEFT,RIGHT PUSH : EXIT----SAVE/EXIT----CANCEL)
ZONE NUM
ZONE DISP
H-POS
V-POS
H-SIZE
V-SIZE
Y LEVEL
CB LEVEL
CR LEVEL
TRANS
RETURN (LEFT,RIGHT PUSH : EXIT----SAVE/EXIT----CANCEL)
Y GAIN
CB GAIN
CR GAIN
POSITION
RETURN (LEFT,RIGHT PUSH : EXIT----SAVE/EXIT----CANCEL)
OFFSET
RETURN (LEFT,RIGHT PUSH : EXIT----SAVE/EXIT----CANCEL)
AUTO/MANUAL
LOW,MIDDLE,HIGH
0~15 default : 0
ON/OFF
0~60 default : 12
0~34 default : 2
0~60 default : 3
0~34 default : 3
0~20 default : 10
0~20 default : 10
0~20 default : 10
0 ~ 3 default : 0
0~32 default : 16
0~255 default : 75
0~255 default : 75
0~255 default : 124
0~32 default : 16
EN771T IMX323_speco LPR.indd 14 2020-07-22 오후 3:20:30

- 15 -
Menu setting can be selected by the button inside the camera.
1. Press the set button.
* The Set Up menu will be displayed on the monitor.
2. Move and select the required function using the Up and Down button.
* Move the triangular indicator Up or Down to select the desired feature by pressing
the Up or Down button.
Menu Set Up
MENU SETUP
MENU SETUP
1.2MOTOR
2.EXPOSURE
3.BACKLIGHT
4.DAY&NIGHT
5.WHITE BAL
6.DNR
7.IMAGE
8.SYSTEM
9.EXIT
1.2MOTOR
2.EXPOSURE
3.BACKLIGHT
4.DAY&NIGHT
5.WHITE BAL
6.DNR
7.IMAGE
8.SYSTEM
9.EXIT
OFF
B&W
AUTO
OFF
OFF
B&W
AUTO
OFF
EN771T IMX323_speco LPR.indd 15 2020-07-22 오후 3:20:30

- 16 -
3. Change menu settings using the Left or Right button.
* Available values or Status are displayed by pressing the Left or Right buttons.
Press the button until desired value / status is displayed.
4. After Changing the setting move the arrow indicator to EXIT and press the
SET button to EXIT.
NOTE
* Move to the available submenu by moving arrow to desired feature.
* Submenu is not available when this symbol displayed “---“.
1. Move the triangular indicator to 2MOTOR using the Up and Down buttons on the Set
Up menu screen.
2. Select the desired lens type by pressing the Left of Right button.
2MOTOR
MENU SETUP
1.2MOTOR
2.EXPOSURE
3.BACKLIGHT
4.DAY&NIGHT
5.WHITE BAL
6.DNR
7.IMAGE
8.SYSTEM
9.EXIT
OFF
B&W
AUTO
OFF
EN771T IMX323_speco LPR.indd 16 2020-07-22 오후 3:20:30

- 17 -
◆ AF MODE
- AUTO : Adjust zoom and focus automatically.
- MANUAL : Adjust zoom and focus manually.
◆ SCANNING
- HALF : Adjust auto focusing when lens focus fixed. If lens focus is not fixed well, adjust focus manually.
- FULL : Scanning full size of scree and adjust autofocusing.
◆ ONEPUSHAF : If you press OSD button 3~4 seconds, focus will be fixed automatically.
◆ SYNC TDN : It can adjust switching time between Day&Night.
◆ INITIAL : If you press OSD button 3~4 seconds, Lens Initializing start.
1. On the Set Up menu, Select EXPOSURE by using the Up or Down button.
EXPOSURE
1. 2MOTOR
AF MODE
SCANNING
ONEPUSHAF
SYNC TDN
INITIAL
RETURN
AUTO
HALF
ON
OFF
ON
MENU SETUP
1.2MOTOR
2.EXPOSURE
3.BACKLIGHT
4.DAY&NIGHT
5.WHITE BAL
6.DNR
7.IMAGE
8.SYSTEM
9.EXIT
OFF
B&W
AUTO
OFF
2. Select the desired shutter mode by pressing the Left or Right button.
EN771T IMX323_speco LPR.indd 17 2020-07-22 오후 3:20:31

- 18 -
2. EXPOSURE
BRIGHTNESS
SHUTTER
SENS-UP
AGC
RETURN
10 IIIIIIIIIIIIIIIIIII|
AUTO
X16
10 IIIIIIIIIIIIIIIIIII|
◆ BRIGHTNESS : The brightness can be adjusted. The brightness control range is 1~20.
◆ SHUTTER : Select one of AUTO/MANUAL/FLICKER to adjust the electronic shutter speed.
MANUAL mode can adjust shutter speed 1/30~1/3,0000.
→ FLK : Select FLK mode if flickering occurs ; caused by the unmatched frequency of electric light.
◆ SENS-UP : The bright screen can be displayed by sensing the degree of the darkness
automatically under the circumstance of low light condition or at night.
→ Off ~x32 Level Adjustable.
◆ AGC (Auto Gain Control) : The higher the AGC level is, the more noises appear.
→ 0~10 Level selectable.
NOTE
* Sens-Up mode is not worked when Electronic shutter is selected as Manual.
BACKLIGHT
On this menu, backlight image can be compensated by users selecting one of modes. (HLC, BLC, WDR)
1. Move the triangular indicator to BACKLIGHT on the SETUP menu screen using the Up and Down button.
2. Select the desired mode by using the left or Right button.
EN771T IMX323_speco LPR.indd 18 2020-07-22 오후 3:20:32

- 19 -
◆ Off : Deactivated status.
◆ HLC : This function is used to surpress or strong light source (for example, headlights of
cars during nighttime) so that other subjects can be seen in more detail. If you select HCL, a
submenu appears where you can make finer adjustments.
- LEVEL : Adjust the brightness level from which on the light source is to be masked out.
0~20 level adjustable.
- COLOR : You can choose BLK/CUSTOMIZE/WHT/YEL/CYN/GRN/MAG/RED/BLU.
HLC
LEVEL
COLOR
RETURN
10 IIIIIIIIIIIIIIIIIII|
BLK
◆ BLC : This function is used to counterbalance the screen image by increasing the brightness
so that a subject which appears dark due to a strong backlight can be displayed in more detail.
If you select BLC, a submenu appears where you can make finer adjustments.
→ H-POS/V-POS/H-SIZE/V-SIZE : Define the position and size of the area of interest by
changing the position & size.
BLC
H-POS
V-POS
H-SIZE
V-SIZE
RETURN
8 IIIIIIIIIIIIIIIIIII|
7 IIIIIIIIIIIIIIIIIII|
3 IIIIIIIIIIIIIIIIIII|
3 IIIIIIIIIIIIIIIIIII|
MENU SETUP
1.2MOTOR
2.EXPOSURE
3.BACKLIGHT
4.DAY&NIGHT
5.WHITE BAL
6.DNR
7.IMAGE
8.SYSTEM
9.EXIT
OFF
B&W
AUTO
OFF
EN771T IMX323_speco LPR.indd 19 2020-07-22 오후 3:20:32

- 20 -
◆ WDR : The WDR (Wide Dynamic Range) function works to correct excessive light within the frame
to produce a usable image. When the image has simultaneous bright and dark areas, it makes both
areas distinct. If you select WDR, a submenu appears where you can make finer adjustments.
-MODE[NORMAL/ROI] can be selected.
WDR
MODE
WEIGHT
RETURN
NORMAL
MIDDLE
- ROI
WINDOW ZONE [0~3]
WINDOW USE [ON/OFF]
H-POS [1~1920] : You can select the horizontal starting position of the monitoring area.
V-POS [1~1080] : You can select the vertical starting position of the monitoring area.
H-ZISE [1~1920] : You can select the horizontal size of the monitoring area.
V-SIZE [1~1080] : You can select the vertical size of the monitoring area.
- WEIGHT [MIDDLE, HIGH, LOW] : Select the WDR level of the camera.
DAY&NIGHT
You can change the color mode of color or black / white by setting up the mode.
1. Select Day&Night using the Up or Down button on the Set Up menu screen.
2. Select the desired mode using the Left or Right buttons.
MENU SETUP
1.2MOTOR
2.EXPOSURE
3.BACKLIGHT
4.DAY&NIGHT
5.WHITE BAL
6.DNR
7.IMAGE
8.SYSTEM
9.EXIT
OFF
B&W
AUTO
OFF
EN771T IMX323_speco LPR.indd 20 2020-07-22 오후 3:20:33