Speco Intensifier K HTINT70K User manual

INSTRUCTION
MANUAL

4QFDP5FDIOPMPHJFTJTDPOTUBOUMZEFWFMPQJOHQSPEVDUJNQSPWFNFOUT
8FSFTFSWFUIFSJHIUUPNPEJGZQSPEVDUEFTJHOBOETQFDJGJDBUJPOTXJUIPVUOPUJDFBOEXJUIPVUJODVSSJOHBOZPCMJHBUJPO 3FW
HTINT70K
(Bullet Camera)
HTINT60K
(Turret Camera)
HTINT59K
(Dome Camera)

Contents
1
Ł

Contents...................................................... 1
Ł

Precautions ................................................. 2, 3
Ł

Safety Instructions ...................................... 4
Ł

Package Contents....................................... 5
Ł

Camera Installation ..................................... 6-12
Ł

Lens Adjustment ......................................... 13-16
Ł

.............................................. 17-20
Ł

Camera Dimension ..................................... 21-22
Ł

Features...................................................... 23
Ł

OSD Menu Details ...................................... 24- 46
Ł

Trouble Shooting......................................... 47

2
Precautions
Do not install the camera in
extreme temperature conditions.
Do not touch the front lens of the
camera.
Never keep the camera pointed
directly at strong light.
Do not expose the camera to
radioactivity.
Do not install the camera under
unstable lighting conditions.
Do not drop the camera or subject
it to physical shocks.
Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially careful to
provide ventilation when operating under
high temperatures.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
It can cause malfunctions to occur. If exposed to radioactivity the CCD
will fail.
Severe lighting change or flicker can
cause the camera to work improperly.
Housing damage can compromise
weatherproof ratings.
NOTE
* If the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.
* please check that the power satisfies the normal specification before
connecting the camera.

3
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION : To prevent electric shock and risk of fire hazards:
ō Do NOT use power sources other than those specified.
WARNING - To prevent electric shock and risk of fire hazards:
୛Do NOT use power sources other than that specified.
୛Do NOT expose this appliance to rain or moisture.
In USA and Canada, Use Class 2 Power Supply Only

4
Safety Instructions
1SFDBVUJPOTGPSVTF
1MFBTFIBOEMFUIJTDBNFSBDBSFGVMMZ
Ł
ŁThere are no user serviceable parts inside
ŁDo not disassemble this camera other than to make initial adjustments
ŁUse a UL approved regulated 24 volt AC or 12 volt DC power supply
Ł

Ł
Please insure that your installation area can support the weight of the camera
ŁDo not use a strong or abrasive detergent when cleaning the camera
ŁDo not install near cooling or heating device

5
Package Contents
Please make sure that the following items are included in the Package:
1) HTINT70K












3) HTINT59K






6
CAMERA INSTALLATION
jvuulj{Gwv~lyGjhislG
XUG~oluG|zpunGXYG}vs{zGkjGOGG\WWGhPG
YUG~oluG|zpunGY[G}vs{zGhjGO[WG}GhP
ZUGjvuulj{G}pklvGjhislG
T jvuulj{GiujGjhislG{vG{olGiujGqhjrUG
kjGXY}GwGz
wGpGaylk
j GaGORP
ishjraOTP
ylkORP
wGz
hjGY[}

7
CAMERA INSTALLATION
Compatibility
1) HTINT70K

CVCJBB INTJBS INTCM
CVCJBD
ȥ
Adaptor plate(60PLATE) with rubber

8
CAMERA INSTALLATION
Compatibility
3) HTINT59K
CVCJBD
ȥ
Adaptor plate(59PLATE) with rubber

CAMERA INSTALLATION
9
The installation instructions in this manual

than that contained in the operating instructions unless you are qualified to do so.
3AXIS BRACKET
SCREW TS T1, 4X25, TH, SUS, 4EA
SCREW M5X10, HEXAGON SOCKET, SUS, BK, 4EA
WALL
1. HTINT70K

CAMERA INSTALLATION
10
2. HTINT60K
BALL DOME BASE
BALL DOME BODY
BALL DOME
SCREW TS T1, 4X25, TH, SUS, 3EA

CAMERA INSTALLATION
11
3. HTINT59K
VANDAL DOME BASE
VANDAL DOME BODY
BODY OUTER COVER SPECO
SCREW TS T1, 3.5X20, PH, SUS, 3EA

12
1. HTINT70K
LENS ADJUSTMENT
Focus adjustment
Open the cap
Lock screw
Zoom adjustment

13
2. HTINT60K
LENS ADJUSTMENT
Focus adjustment
Lock screw
Zoom adjustment

14
3. HTINT59K
LENS ADJUSTMENT
Focus adjustment
Zoom adjustment
Open the cap

15
Image Sensor
Resolution
Effective Pixels
Total Pixels
Scanning System
S/N Ratio
Frame rate
Video Output
Minimum Illumination
LENS
Electronic Shutter Speed
OSD
BLC
HSBLC
WDR (Wide Dynamic Range)
Digital WDR
Day&Night
White Balance
Smart-IR
Sense-Up
Motion Detection
Motion Tracking (Quick Zoom)
OSD output for Anti Shifting
OSD output for Anti Blocking
3D DNR
Defog
Brightness
AGC
Privacy Masking
Mirror / V-FLIP
Sharpness
LensShading Compensation (LSC)
RS-485(Protocol)
View Angle
CVBS OUTPUT
Communication
Language
Power Supply
Operating Temperature
Lens
Dimension
1/3" 1.3MP SONY Sensor
1000TV Lines
1305(H) X 1049(V), 1.37M Pixels
1312(H) X 1069(V), 1.40M Pixels
Progressive Scan
More than 50dB
MAX 50P/60P
CVBS : 1.0Vp-p/75 Ohm
0Lux(Intensify x64)
DC/MANUAL
AUTO / Manual(1/60Sec ~ 1/60000Sec) / FLICKER
Built-in
O
O
ON(LOW,MIDDLE,HIGH) / OFF
ON(LOW/MIDDLE/HIGH) / OFF
Color / BW / EXTERN / Auto
AATW / AWB / AWC -> SET / MANUAL
0~20(Level Adjustable), Default : 0
x2 ~ x64, Default : x16
ON / OFF (Programmable 4 Zones)
ON/OFF
ON/OFF
ON/OFF
OFF/LOW/MIDDLE/HIGH
ON(AUTO/MANUAL) / OFF
0~20 (Level Adjustable), Default : 10
0~20 (Level Adjustable), Default : 15
ON / OFF (Programmable 16 Zones)
ON/OFF
0~10 (Level Adjustable), Default : 7
ON/OFF
Available
WIDE 4:3 / Normal / WIDE 16:9
NTSC / PAL selectable
Coaxial Control
English
DC12V/AC24V Dual Voltage Operation
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
Storage Temperature -4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
DC Auto Iris Varifocal Lens(2.8mm-12mm)
3.94"(W) * 3.94"(H) * 8.27"(D)
Power Consumption DC 12V 590mA / AC 24V 350mA
Weight 3.09 Ibs
HTINT70K
64
SPECIFICATIONS
+7,17.

Intensifier K Series


16
Image Sensor
Resolution
Eective Pixels
Total Pixels
Scanning System
S/N Ratio
Frame rate
Video Output
Minimum Illumination
LENS
Electronic Shutter Speed
OSD
BLC
HSBLC
WDR (Wide Dynamic Range)
Digital WDR
Day&Night
White Balance
Smart-IR
Sense-Up
Motion Detection
Motion Tracking (Quick Zoom)
OSD output for Anti Shifting
OSD output for Anti Blocking
3D DNR
Defog
Brightness
AGC
Privacy Masking
Mirror / V-FLIP
Sharpness
LensShading Compensation (LSC)
RS-485(Protocol)
View Angle
CVBS OUTPUT
Communication
Language
Power Supply
Operating Temperature
Lens
Dimension
1/3" 1.3MP SONY Sensor
1000TV Lines
1305(H) X 1049(V), 1.37M Pixels
1312(H) X 1069(V), 1.40M Pixels
Progressive Scan
More than 50dB
MAX 50P/60P
CVBS : 1.0Vp-p/75 Ohm
0Lux(Intensify x64)
DC/MANUAL
AUTO / Manual(1/60Sec ~ 1/60000Sec) / FLICKER
Built-in
O
O
ON(LOW,MIDDLE,HIGH) / OFF
ON(LOW/MIDDLE/HIGH) / OFF
Color / BW / EXTERN / Auto
ATW / AWB / AWC -> SET / MANUAL
0~20(Level Adjustable), Default : 0
x2 ~ x64, Default : x16
ON / OFF (Programmable 4 Zones)
ON/OFF
ON/OFF
ON/OFF
OFF/LOW/MIDDLE/HIGH
ON(AUTO/MANUAL) / OFF
0~20 (Level Adjustable), Default : 10
0~20 (Level Adjustable), Default : 15
ON / OFF (Programmable 16 Zones)
ON/OFF
0~10 (Level Adjustable), Default : 7
ON/OFF
Available
WIDE 4:3 / Normal / WIDE 16:9
NTSC / PAL selectable
Coaxial Control
English
DC12V/AC24V Dual Voltage Operation
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
Storage Temperature -4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
DC Auto Iris Varifocal Lens(2.8mm-12mm)
4.65"(Dia) * 3.80"(H)
Power Consumption
DC 12V 570mA/AC 24V 350mA
Weight 1.99 Ibs
HTINT60K
64
SPECIFICATIONS
+7,17.

Intensifier K Series


17
Image Sensor
Resolution
Eective Pixels
Total Pixels
Scanning System
S/N Ratio
Frame rate
Video Output
Minimum Illumination
LENS
Electronic Shutter Speed
OSD
BLC
HSBLC
WDR (Wide Dynamic Range)
Digital WDR
Day&Night
White Balance
Smart-IR
Sense-Up
Motion Detection
Motion Tracking (Quick Zoom)
OSD output for Anti Shifting
OSD output for Anti Blocking
3D DNR
Defog
Brightness
AGC
Privacy Masking
Mirror / V-FLIP
Sharpness
LensShading Compensation (LSC)
RS-485(Protocol)
View Angle
CVBS OUTPUT
Communication
Language
Power Supply
Operating Temperature
Lens
Dimension
1/3" 1.3MP SONY Sensor
1000TV Lines
1305(H) X 1049(V), 1.37M Pixels
1312(H) X 1069(V), 1.40M Pixels
Progressive Scan
More than 50dB
MAX 50P/60P
CVBS : 1.0Vp-p/75 Ohm
0Lux(Intensify x64)
DC/MANUAL
AUTO / Manual(1/60Sec ~ 1/60000Sec) / FLICKER
Built-in
O
O
ON(LOW,MIDDLE,HIGH) / OFF
ON(LOW/MIDDLE/HIGH) / OFF
Color / BW / EXTERN / Auto
ATW / AWB / AWC -> SET / MANUAL
0~20(Level Adjustable), Default : 0
x2 ~ x64, Default : x16
ON / OFF (Programmable 4 Zones)
ON/OFF
ON/OFF
ON/OFF
OFF/LOW/MIDDLE/HIGH
ON(AUTO/MANUAL) / OFF
0~20 (Level Adjustable), Default : 10
0~20 (Level Adjustable), Default : 15
ON / OFF (Programmable 16 Zones)
ON/OFF
0~10 (Level Adjustable), Default : 7
ON/OFF
Available
WIDE 4:3 / Normal / WIDE 16:9
NTSC / PAL selectable
Coaxial Control
English
DC12V/AC24V Dual Voltage Operation
Power Consumption IR LED ON : DC 12V 750mA/AC 24V 165mA, IR LED OFF : DC 12V 400mA/AC 24V 95mA
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
Storage Temperature -4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
DC Auto Iris Varifocal Lens(2.8mm-12mm)
5.31"(W) * 3.74"(H) * 11.57”(D)
Weight 3.96 Ibs
VL7038K
64
SPECIFICATIONS
+7,17.

Intensifier K Series


18
CAMERA DIMENSION
1) HTINT70K
3.94” dia
3.38”
8.27”
4.80”
2.95”
3.01” 3.46”

4.65” dia
3.80”
2.66”
3.01”

19
CAMERA DIMENSION
3) HTINT59K
4.72” dia
3.35”
1.82”
3.23” dia