Spectra Logic T-Series Spectra T50 User manual

Components Shipped with the Library
Tabletop Configuration
Rack Mount Configuration (Optional)
Preparing the Library
Spectra T50 Library
Quick Installation
Before You Begin ...
Become familiar with the
items that shipped with your
library.
Prepare the library for
tabletop or rack mount
configuration.
1
2
3
Stylus
TeraPack Magazines
(minimum of two)
Terminator
Power
Cord
14 in. (35.6 cm)
CCAAUUTTIIOONN:
The library must
be installed on a
ssttrroonngg,,ssttuurrddyy,,
lleevveellssuurrffaaccee.
Nothing should
ever be placed
directly on top
of the library.
Rubber
Feet
4
Position the mounting brackets on the front of
the library with brackets’ square cut-outs aligned
at the bottom edge of the library. Secure the
brackets using four Phillips screws.
Plug the power
cord in to the
library and in to
a power outlet.
Press the power
button to power
on the library.
su
Type ssuuin the
User field, then
select LLooggiinn.
(No password
until one is set.)
LLIIBBRRAARRYYIINNFFOORRMMAATTIIOONN::
PPaarrttNNuummbbeerr::________________________________________________
SSeerriiaallNNuummbbeerr::______________________________________________
S
SeerrvviicceeLLeevveell::________________________________________________
2 in. (5.1 cm)
from each side
8.75 in.
(22.2 cm)
Option Activation Keys (on Paper)
P.N. 90970002 Revision E
Slide the left rail
into the rail
bracket.
Slide
the right
rail into the
rail bracket
on the right
shelf piece.
Use two screws to attach the brackets
on the front of the library to the front of
the rack.
Attach the left rail bracket to the left
side of the rack with four screws.
Attach the right rail bracket to the
right side of the rack with four screws.
For Assistance,
Contact Support
U.S. and Canada:
Phone: [phone]
E-Mail: [email protected]
Mexico, Central America,
South America, Asia, Australia,
and New Zealand:
Phone: [phone]
E-Mail: [email protected]
Europe, Middle East, and Africa:
Business Hours: [phone]
After Hours: [phone]
E-Mail: [email protected]
Note on After-Hours Service:
Only customers with valid
around-the-clock telephone
service contracts receive
after-hours assistance.

Cabling : SCSI
Preparing the Library for Operation
Initial Configuration
Importing TeraPack Magazines
6Select the
GGeenneerraallmenu.
Then select
IImmppoorrtt//EExxppoorrtt.
Insert TeraPack
magazines as
shown, with the
opening outward.
Powering Off the Library and Host
Power off
the library.
Power off the host.
Cabling : Fibre Channel
7
or
Drive 1 Drive 2
(if installed)
1 Full-Height Drive or 1 Half-Height Drive 2 Full-Height or 2-4 Half-Height Drives Daisy-Chaining
2 Full-Height or 2-4 Half-Height Drives
9Type ssuu
in the
User field,
then
select
LLooggiinn.
(No
password
until one
is set.)
Power
on the
library.
Check for
visibility.
5AAuuttoommaattiiccaallllyyccrreeaatteeaappaarrttiittiioonn
assigns all library resources to
one partition.
MMaannuuaallllyyccrreeaatteeaappaarrttiittiioonn
allows
you to assign library
resources to the partition.
For more information on
partitioning, see the
Spectra T50 Library User
Guide
, available online at
www.SpectraLogic.com.
If you have a
CCooDD
aaccttiivvaattiioonn
kkeeyy
(shipped
with your
library),
enter it here.
Otherwise,
select SSkkiipp.
Power on the host.
8Cabling : iSCSI
or
Select MMeennuu>>CCoonnffiigguurraattiioonn
>>OOppttiioonnKKeeyyss.
Type in the
SSeerrvviicceeKKeeyy
(shipped
with your
library).
In the
Option Keys
screen,
select NNeeww.
Install device drivers.
Go to wwwwww..SSppeeccttrraaLLooggiicc..ccoomm
>>SSuuppppoorrtt
>>FFiirrmmwwaarree&&DDrriivveerrss
su