Spencer PRO SKID-E User manual

1
User’s Manual
SKID-E, PRO SKID-E, PRO SKID-E MAX,
SKID-E READY, SKID-OK, SKID-OK MAX
Evacuation chairs
Caution: U.S. Federal law restricts this device to sale by or on the order of a licensed healthcare practitioner
This appliance conforms with the Directive 93/42/CEE “Medical Devices”
Guarantee of Quality system for the production and the final control of the products certified by
the notifying body TÜV SÜD Product Service GmbH.
INDEX
General information page 2
Warnings page 3
Product description page 5
Operating instructions page 7
Maintenance and cleaning page 11
Accessories and spare parts page 12
First edition: 06/12/10
Rev. 4: 09/02/17

2
Thank you for choosing a Spencer product
1. GENERAL INFORMATION
1.1 Aim and contents
The aim of this manual is to supply all the information necessary so that the client, will not only
attain adequate use of the appliance, he will also be capable of using the instrument in the most
autonomous and secure way possible. This includes information regarding technical aspects,
functioning, maintenance, spare parts and safety.
1.2 Conservation of the instruction manual
The instruction and maintenance manual must be kept together with the product, for the whole life
of the device, inside the specially provided container and above all, away from any substances or
liquids which could compromise perfect legibility.
1.3 Symbols used
Symbol Meaning
General or specific warning
See instructions for use
Serial number
Product code
The product is compliant with the specifications of the Directive 93/42/CEE
Information for end users regarding the Directive 2006/66/CE regarding waste
batteries
This symbol refers to the accessory SK13013D
Alarm for SKID Series evacuation chairs
1.4 Servicing request
For any information regarding the use, maintenance and installation, please contact the Spencer
Customer Care Service on tel. [phone], fax [phone], e-mail [e-mail] or
write to Spencer Italia S.r.l. - Strada Cavi, 7 - 43044 Collecchio (Parma) - ITALY. In order to
facilitate the assistance service, please always indicate or communicate the serial number (SN)
shown on the label applied on the box or on the device.
1.5 Demolition
When the devices are no more suitable for being used, if they haven’t been contaminated by any
particular agents, they can be disposed of as normal solid waste, otherwise follow the current
regulations about demolition.
This symbol refers to the accessory SK13013D
Alarm for SKID Series evacuation chairs
DISPOSAL OF WASTE BATTERIES
This symbol on the battery or on the packaging indicates that the battery provided with this product
shall not be treated as household waste. By ensuring these batteries are disposed of correctly, you
will help prevent potentially negative consequences for the environment and human health which
could otherwise be caused by inappropriate waste handling of the battery. The recycling of the
materials will help to conserve natural resources. At the end of their life hand the
batteries over to the applicable collection points for the recycling of waste batteries. For more
detailed information about recycling of this product or battery, please contact your local Civic Office,
your household waste disposal service or the shop where you purchased the product.

3
1.6 Labelling
Each device has got an identifying label, positioned on the device itself and/or on the box. This label
includes information about the Manufacturer, the product, CE mark, lot number (LOT). It must never
be removed or covered.
2. WARNINGS
2.1 General warnings
The product must be used by trained personnel only, having attended specific training for this
device and not for similar products.
Training routines must be registered on a special register in which the names of those trained, of
the trainers, date and place are indicated. This register which will certify the eligibility of the
operators to use the Spencer device has to be kept for a period of 10 years after the disposal of
the device itself. This register will be made available to the Competent Authorities and/or
Manufacturer if requested.
Spencer Italia S.r.l. is always available for conducting training courses.
Before carrying out any kind of operation on the appliance (training, installation, use), the
operator must carefully read the enclosed instructions, paying particular attention to the correct
safety precautions and to the procedures to be followed for installation and for correct use.
If the instructions belong to another device and not the device received, inform the Manufacturer
immediately and avoid use of the device.
In the case of any doubts as to the correct interpretation of the instructions, please contact
Spencer Italia S.r.l. for any necessary clarifications.
Do not allow untrained personnel to help when using the device as they may cause injury to the
patient or themselves.
Perform the required maintenance and to respect the life span of the device, as indicated by the
Manufacturer in the User’s Manual.
Before each use of device the perfect operating state of the device must be checked as specified
in the Instruction manual. If any damage or abnormalities which could in any way influence the
correct functioning and the safety of the device, of the patient and or of the user are detected,
the device must be immediately removed from service and the Manufacturer must be contacted.
If any failure or incorrect functioning of the device is detected, it must be immediately substituted
with a similar item so that the rescue procedures are guaranteed without any interruption.
Use of the device in anyway other than described in this manual is forbidden.
Do not alter or modify in any way the appliance; any such interference could cause malfunctions
and injury to the patient and/or rescuer.
The appliance must not in any way be tampered with (modification, adjustment, addition,
replacement). In such cases all responsibility will be denied for any malfunctions or injuries
caused by the appliance itself; moreover CE certification and product warranty will be considered
void.
Those who modify or have modified, prepare or have prepared medical appliances in such a way
that they no longer serve the purpose for which they were intended, or no longer supply the
intended service, must satisfy the valid conditions for the introduction onto the market.
Handle with care.
Ensure that all the necessary precautions are taken in order to avoid the hazards that can arise
as the result of contact with blood or body fluids.
Register and store with these instructions: lot number, place and date of purchase, first date of
use, date of checks, name of users, any comments.
When the device is being used, the assistance of qualified staff must be guaranteed.
Never leave an unassisted patient. The presence of at least one operator is essential at all times
when the medical device is in use.
Do not store the device underneath any heavy objects which could cause structural damage.
Store in a cool, dry, dark place and do not expose to direct sun.
Store and transport device in its original packaging.
The device not be exposed to or come into contact with any source of combustion or inflammable
agents.
Position and adjust the device taking care not to cause any obstruction to rescuers and or any
other rescue equipment.
Attention: laboratory testing, post production tests, instruction manuals cannot always consider
every possible scenario for use. This means that in some cases the performance of the product
could be notable different from results to date obtained. Instructions are continually being

4
updated and are under tight surveillance of fully qualified staffs with adequate technical
formation.
With reference to the D. Lgs. 24th February 1997, n. 46 emended by D. Lgs. 25/01/2010, n. 37 –
Acknowledgement of Directive 93/42/CEE and 2007/47/CE, we remind both public and private
operators that they are obliged to report any accident that involves any medical device to the
Ministry of Health and to the Manufacture as specified and within time given by the European
regulations.
In addition, both public and private operators are obliged to inform the Manufacturer of any
measures that should be adopted to make the steps necessary to guarantee the safety and the
health of the patients and the users o any medical device.
2.2 Specific warnings
Establish a maintenance program and periodic testing, identifying an reference employee. The
person to whom the ordinary maintenance of the device is entrusted must ensure the basic
requirements foreseen by the Manufacturer in the user’s manual.
Training routines must be registered on a special register in which the names of those trained,
of the trainers, date and place are indicated. This register which will certify the eligibility of the
operators to use the Spencer device has to be kept for a period of 10 years after the disposal of
the device itself. This register will be made available to the Competent Authorities and/or
Manufacturer if requested.
If any failure or incorrect functioning of the device is detected, it must be immediately
substituted with a similar item so that the rescue procedures are guaranteed without any
interruption.
Before each use of device the perfect operating state of the device must be checked as specified
in the Instruction manual. If any damage or abnormalities which could in any way influence the
correct functioning and the safety of the device, of the patient and or of the user are detected,
the device must be immediately removed from service and the Manufacturer must be contacted.
When the device is being used, the assistance of qualified staff must be guaranteed.
Never leave an unassisted patient. The presence of at least one operator is essential at all times
when the medical device is in use.
The device not be exposed to or come into contact with any source of combustion or inflammable
agents.
Store in a cool, dry, dark place and do not expose to direct sun.
Do not store the device underneath any heavy objects which could cause structural damage.
Store and transport device in its original packaging.
Position and adjust the device taking care not to cause any obstruction to rescuers and or any
other rescue equipment.
For blocking and transporting the patient, follow the procedures approved by the Emergency
Medical Service.
Always respect the maximum load capacity, indicated in this user's manual.
Do not operate if the weight is not correctly distributed.
Upstairs movement, without having to lift the device, is allowed only with the PRO SKID-E
model.
When using the device for evacuation over stairways or simple transport, at least two operators
with suitable physical conditions are needed.
2.3 Contraindications and side effects
The use of this device, if used as described in this manual, does not present any contraindications or
collateral effects.
2.4 Physical requirements of the operators
The Spencer SKID-E, PRO SKID-E, PRO SKID-E MAX, SKID-E READY, SKID-OK and SKID-OK MAX
evacuation and transport chairs are for professional use only. Operators using the device must
possess the following minimum requirements:
• physical capacity for using the device.
• be able to grab the device firmly with both hands
• have robust back, arms and legs for lifting, pushing and pulling the evacuation chair
• have a good muscular coordination
Every operator has to be trained in safe and efficient patient transport techniques.

5
Loading techniques, in case of extremely heavy patients, uneven terrains or unusual situations, may
require more than the usual two operators.
Before deciding the roles of the operators during the use of the device, their capabilities
must be evaluated.
3. PRODUCT DESCRIPTION
3.1 Intended use
The evacuation chairs Spencer SKID-E, PRO SKID-E, PRO SKID-E MAX, SKID-E READY, SKID-OK
and SKID-OK MAX are devices for seated patient transport, in cases in which another cumbersome
device can not guarantee adequate and safe transport. The use of passive belts that slide on the
stairs ensure a high safety level requiring no effort which permits safe and reliable evacuation during
emergency operations.
Designed for quick movement over stairways (downstairs and upstairs), but useable for normal
transport as well.
Intervention of the patient on the device is not expected.
3.2 Main components
n°
Component
Material
SKID-
E
PRO
SKID-E
PRO
SKID-E
MAX
PRO
SKID-E
AIR
SKID-E
READY
SKID-
OK
SKID-
OK MAX
1
Front footrest
aluminium
●
●
●
●
●
●
●
2
Rear left handle group
aluminium
●
●
●
3
Rear right handle group
aluminium
●
●
●
4
Front telescopic left handle
group
aluminium
●
●
●
5
Front telescopic right
handle group
aluminium
●
●
●
6
Blocking system rear
handles (n° 2)
aluminium
●
●
●
7
Seat sheet
PVC
●
●
●
●
●
●
●
8
Backrest sheet
PVC
●
●
●
●
●
●
●
9
Extendible handle
aluminium
●
●
●
●
●
●
10
Rear wheels Ø 200 mm (n°
2)
rubber coated
polyurethane
●
●
●
●
11
Front wheels Ø 100 mm
pivoting with brake (n° 2)
polypropylene
●
●
●
●
●
●
●
12
Slide with belt (n° 2)
covered
rubber
●
●
●
●
●
●
●
13
Rear wheels Ø 200 x 32
mm (n° 2)
polypropylene
●
14
Front wheels Ø 150 x 32
mm (n° 2)
rubber coated
polyurethane
●
●

6
3.3 Models
SK20001E SKID-E Evacuation chair with silver frame and black sheet
SK10001E PRO SKID-E Evacuation/transport chair with yellow frame and black sheet
SK10201E PRO SKID-E Evacuation/transport chair with silver frame and black sheet
SK20101E SKID-E READY Evacuation chair with fixed backrest, yellow frame and black sheet
SK20002E SKID-OK Evacuation chair
SK10002E PROSKID-E AIR Evacuation chair with yellow frame and black sheet
SK10202E PROSKID-E MAX T/SILVER load capacity 250 kg
SK20005E SKID-OK MAX load capacity 250 kg
3.4 Technical data
Characteristics
SKID-
E
PRO
SKID-E
PRO
SKID-E
MAX
PRO
SKID-E
AIR
SKID-E
READY
SKID-
OK
SKID-
OK
MAX
Width (mm)
530
550
550
410
530
520
520
Length (mm)
900
1110
1110
1110
900
900
900
Length with opened handles (mm)
-
1450
1450
1450
-
-
-
Height with opened backrest (mm)
1600
1600
1600
1600
1600
1540
1540
Height with closed backrest (mm)
1070
1070
1070
1070
-
1040
1040
Thickness closed (mm)
330
330
330
330
330
175
175
Weight (kg)
12,7
14,2
14,2
13,8
13,5
10
10
Maximum load capacity (kg)
150
150
250
150
150
150
250
Fig. A
Fig. B

7
3.5 Reference standards
Reference
Title of document
MDD 93/42/CEE
European Directive about Medical Devices
MDD 2007/47/CEE
Modifications to 90/385/CEE Directive about active
implants, Directive 93/42/CEE about medical devices
and Directive 98/8/CE about the introduction of biocides
onto the market
Legislative Decree 24/02/1997, n. 46
Application of the 93/42/CEE Directive about Medical
Devices
Legislative Decree 25/01/2010, n. 35
Modifications and additions to the 20/02/97 Decree n.
46
UNI EN ISO 9001
Managing systems for quality: requirements
UNI EN ISO 9000
Managing systems for quality: basis and vocabulary
UNI EN ISO 13485
Medical Devices - Managing systems for quality –
Requirements for regulamentation requirements
UNI EN ISO 14971
Application of risks managing to medical devices
UNI CEI EN 980
Graphic symbols used for medical devices labelling
UNI CEI EN 1041
Information supplied by the medical devices
manufacturer
CEI EN 62366
Medical Devices - Application of the utilisation
characteristics of engineering to medical devices
MEDDEV 2.4/1a-b
Guideline for the classification of medical devices
NB-MED 2.5.1 /Rec 5
Technical Documentation
MEDDEV 2.7.1
Clinical Data
MEDDEV 2.12/1
Medical Devices vigilance system
UNI EN 14155
Clinical evaluation of the medical devices for human
beings - Part 2: Clinical evaluation plans
BS OHSAS 18001
Managing systems for safety and health at workplace
3.6 Environmental conditions
Functioning temperature: from -15 to +50 °C
Storage temperature: from -20 to +60 °C
Relative humidity: from 15 to 90%
4. OPERATING INSTRUCTIONS
4.1 Transport and storage
Before transporting the appliance, make sure that it is correctly packaged ensuring also that there
are no risks of shocks, bumps or falls during the transport itself.
Keep the original packaging for use in case of any further transport and for storage. Damage to the
appliance caused during transport and handling is not covered by the guarantee. Repairs or
replacement of the damaged parts are the responsibility of the client. The device must be stored in a
dry, cool area away from direct sunlight. It must not be placed in contact with any substances or
chemical agents which could cause damage and reduce safety characteristics.
During storage take care not to put heavy materials onto the device. In no way and under no
circumstances should the device be considered as a work top.
4.2 Preparation
On receipt of the product:
Remove the packaging and display the material so that all components are visible.
Check that all the components/pieces on the accompanying list are present.
The appliance must be checked before every use so as to reveal any working abnormalities and/or
damage caused by transport and/or storage.
Therefore, before using the device, check:
• General functionality of the device
• Fixation of nuts and bolts
• State of use of the wheels and braking system
• State of use of the caterpillar belts and slide
• State of use of restraints, seat and headrest
• Functionality springs

8
If the device respects these conditions, it may be considered ready for use.
4.3 Functioning
4.3.1 Opening the device
1. Put the device in vertical position (fig. C) and pull out the extendible rear handle until it is blocked
automatically using the purpose made locking hooks (this operation is not necessary for the SKID-E
READY model).
2. Loosen the restraints, to free the "chair".
3. Grab with one hand the seat and the extendible handle with the other, push both parts away from
each other, until the chair is completely opened. The evacuation chair is now ready to be placed
safely on the floor
4. Unblock the brakes of the two front Ø 100 mm wheels. The device is now ready for use.
4.3.2 Closing the device
If the device is not occupied by the patient:
1 - Using both breaks, block both front Ø100 mm wheels turned in inside direction.
2 - Only PRO SKID-E and PRO SKID-E MAX models: Disengage the rear handles (if positioned
as in fig. E - F) by inserting the hooks in the blocking system (fig. G).
3 - Take position at the rear side of the chair, push both levers in order to unblock the extending
handle and push it downwards along the special nylon guides.
4 - Grab the "seat" and the backrest and push them towards one another until the closed position is
reached.
Fig. C
Fig. D

9
5 - Attach the belt around the body which will block the seat in position.
4.3.3 Patient transport on stairways - Downstairs
1 - Apply the procedure described in paragraph 4.3.1.
2 - Grab the main handle firmly with both hands and let the patient sit on the chair. Make sure
during this operation that both front Ø 100 mm wheels touch the ground.
3 - Secure the patient to the device using the special safety belts for the head and the body.
4 - Move close to the stairs and position on the side with the handrail. The first operator always
keeps his hands on the handle firmly and follows the downstairs movement of the device,
maintaining continual speed control and grip for a safe downstairs movement.
The second operator should not be in front of the device (in front of the patient), but on
the side of the device and to a certain distance (a few steps down), he must
drive down operations in an optimal manner and must be prepared to intervene if
necessary, without ever compromising his safety.
5 - Maintain a constant pressure in downward direction. This will improve the stability of the device
(fig. H).
6 - When the descent has terminated, position the wheels correctly on the surface in order to
guarantee safe and easy horizontal maneuvering.
Fig. G
Fig. H
Fig. E
Fig. F
Fig. G

10
4.3.4 Patient transport on stairways - Upstairs (PRO SKID-E and PRO SKID-E MAX
MODELS ONLY)
This operation is possible with the PRO SKID-E model only.
1 - Apply the procedure described in paragraph 4.3.1.
2 - Secure the patient to the device using the special safety belts for the head and the body.
3 - The first operator behind the device, has to block the rear handles (fig. G), rotating the hook
downwards and fixing it to the hinge between slide and frame (fig. E - F).
4 - The second operator, in front of the chair, has to grab the front telescopic handles at the front
and move them by pushing the button.
5 - Using adequate lifting techniques, the operators must simultaneously lift the chair and start
transport (fig. I).
For this type of transport the presence of a third operator is recommended in order to
guide the other two.
4.4 Troubleshooting
PROBLEM
CAUSE
REMEDY
The device does not unblock
from open or closed position
during the opening or closing
procedure
The functional geometry has
been compromised or
damaged
Try complete lubrication and
check if the problem has
been solved; if not, take
immediately the device out of
service and contact the
Spencer customer care
service
Difficulties extracting and
inserting the telescopic
handles (PRO SKID-E and
PRO SKID-E MAX models)
Presence of foreign bodies in
the slide or breakage in
aluminium part
Clean accurately; if this does
not solve the problem,
do not use the device for
upstairs transport
and contact the Spencer
customer care service
The headrest extendible
handle does not block in
open position
Breakage of springs of the
blocking system
Take the device immediately
out of service and contact
the Spencer customer care
service
Difficulties in controlling the
device during downstairs
transport
Damage of the sliding belt
system
Take the device immediately
out of service and contact
the Spencer customer care
service
Structural damage
Improper use or untrained
personnel
Take the device immediately
out of service and contact
the Spencer customer care
service
Fig. I

11
5. MAINTENANCE AND CLEANING
5.1 Cleaning
Failure to carry out cleaning operations may involve the risk of cross infection due to the presence of secretions
and/or residuals.
The operator must always wear adequate personal protection such as gloves and mask etc. during
all checking and cleaning procedures.
The metal parts exposed to external influences are treated superficially and/or painted in order to obtain better
resistance. Clean the exposed parts with delicate soap and a sponge and dry with a soft cloth. In order to
obtain a shiny finish of the frame parts, use shiny creams and waxes for vehicles. We advice the use of the
polishing detergent Spencer STX 99.
Do not use high-pressure water. It may penetrate joints and eliminate lubricants, increasing the risk of
corrosion of components.
Rinse carefully with warm water to remove all traces of detergents. Failure to do so could compromise the
product and its life span. The device must be left to dry completely before storage. To dry the product after
washing, or if used in a humid atmosphere, do not use direct sources of heat or flame.
5.2 Maintenance
Establish a maintenance program and periodic testing, identifying an reference employee. The person who
carries out the maintenance of the appliance has to guarantee the basic requirements indicated by the
Manufacturer in the following paragraphs.
All maintenance activities, both precautionary and special, must be registered on documents including technical
reports about operations. This register has to be kept for a period of at least 10 years after the disposal of the
device itself. This register will be made available to the Competent Authorities and/or Manufacturer if
requested.
With reference to the D. Lgs. 24th February 1997, n. 46 emended by D. Lgs. 25/01/2010, n. 37 –
Acknowledgement of Directive 93/42/CEE and 2007/47/CE, we remind both public and private operators that
they are obliged to report any accident that involves any medical device to the Ministry of Health and to the
Manufacture as specified and within time given by the European regulations. In addition, both public and
private operators are obliged to inform the Manufacturer of any measures that should be adopted to make the
steps necessary to guarantee the safety and the health of the patients and the users o any medical device.
5.2.1 Precautionary Maintenance
The person who carries out the precautionary maintenance of the appliance (user in person,
Manufacturer/supplier or a third party) has to guarantee the following basic requirements:
Technical knowledge of the appliance and of the periodic maintenance procedures as described in these
instructions.
Specific qualifications and training in the maintenance operations of the appliance in question.
The use of components/replacement parts/accessories that are either original or approved by the supplier,
in such a way that each operation causes no alteration or modification to the appliance.
Possession of the checklist of operations carried out on the appliance.
Guarantee complete adherence to the instructions of the Directive 93/42/CEE which includes also the
obligation towards the Manufacturer to maintain post sales records and traceability of the appliance if
requested.
During all checking, maintenance and cleaning procedures, the operator must wear adequate
personal protection such as gloves, mask, glasses etc.
Check ups to be performed before every use:
• Functionality of the device
• Fixation of nuts and bolts
• State of use (moving parts, wheels, restraints, seat, headrest, sliding system, belts)
• Correct lubrication of moving parts
The inspection frequency is determined by factors such as legal requirements, the type of use,
frequency of use, environmental conditions during use and storage. Please note that you must do the
cleaning as described in paragraph 5.1 and verify functionality before and after each use. Spencer Italia S.r.l.
declines any responsibility for the proper functioning or damages caused to the patient or user by the use of
devices not subject to routine maintenance, warranty and will void the compliance to the Medical Device
Directive 93/42/CEE.

12
The person responsible for every day maintenance can only substitute the spare parts indicated on
paragraph 6.2 "Spare Parts". All other substitutions or repairs can be carried out only by the
manufacturer or by a centre authorised by the manufacturer.
5.2.2 Periodic maintenance
If the correct revision is not carried out, the device MUST BE PUT OUT OF SERVICE, because the CE branding
will no longer be considered valid and consequently it is no longer compliant with the safety standards declared
by the manufacturer at time of purchase.
Spencer Italia S.r.l. will take no responsibility for the incorrect functioning or any damage caused by a device
that has not undergone regular revision.
For any operations that are not carried out directly by the manufacturer but by an authorised centre, we have
to underline that a report regarding all operations carried out must be requested. This will permit both Spencer
Italia S.r.l. and the end user to keep a log book regarding the operations carried out on the device.
5.2.3 Special servicing
Only the Manufacturer or centres with written authorisation are authorised to complete any special
servicing operations.
For any operations that are not carried out directly by the Manufacturer but by an authorised centre, we have
to underline that a report regarding all operations carried out must be requested. This will permit both Spencer
Italia S.r.l. and the end user to keep a log book regarding the operations carried out on the device
5.2.4 Life span
The device, if used as indicated in the instruction manual, has an average life span of 5 years starting from the
purchase date.
The life span of the device can be extended for up to another 5 years following the annual revision.
General revisions must be carried out by the manufacturer or by a centre authorized by the manufacture. If
such annual revisions are not carried out, the device MUST BE DISPOSED AND THIS EVENT MUST BE
NOTIFIED TO THE MANUFACTURER.
Spencer Italia S.r.l. will accept no responsibility for the incorrect functioning and/or damage caused by the use
of any device which has not been serviced by the manufacturer or authorized centre, or of any device for which
the life span is expired
6 ACCESSORIES AND SPARE PARTS
6.1 Accessories
SK14000B Wall bracket
SK21000E Transport bag (SKID-E, PRO SKID-E and PRO SKID-E MAX)
SK13013D Alarm system for SKID Series evacuation chairs
SK13018C Strap for ankles
6.2 Spare parts
SK11000B Backrest sheet
SK12000B Seat sheet
ST00427A Pair of black belts with Derlin buckle
ST21400A 100 mm Ø wheel with brake
ST30428B Lower wheel carrier in black nylon
ST30429B Higher wheel carrier in black nylon
ST30449A Black PVC handle

13
ATTACHMENT A –TRAINING REGISTER
The product must be used by trained personnel only, having attended specific training for this device
and not for similar products.
Keep this document at least 10 years from the end of life of the device.
Operator’s
name
Training date
Training method
(user’s manual,
during service,
former class, etc)
Trainer
Basic
training
Advanced
training

14
ATTACHMENT B –MAINTENANCE REGISTER
Keep this document at least 10 years from the end of life of the device.
Perform the required maintenance and to respect the life span of the device, as indicated by the
Manufacturer in the User’s Manual.
Code and description of the device
Purchase date
Lot (LOT)
Bought by
SERVICE
DATE
KIND OF SERVICE
(Maintenance/
check/
extension of life span)
OPERATIONS MADE ON
THE DEVICE
RESULT
PERSON IN
CHARGE OF
SERVICE
(Operator/Auth
orized centre/
Manufacturer)
Warning
The information contained in this document could be modified without any warning and is not to be intended as a commitment on behalf of
Spencer Italia S.r.l. Spencer products are exported to many countries and the same identical regulations are not always valid. For this reason
there could be differences between the description here described and the product actually delivered. Spencer continually strives to reach the
perfection of all items sold. We therefore hope you will understand if we reserve the right, at any time, to modify the shape, equipment, lay-out
or technical aspects that are herein described.
© Copyright Spencer Italia S.r.l.
All rights reserved. No part of this document can be photocopied, reproduced or translated into another language without the written approval
of Spencer Italia S.r.l.