Spinlock XTR0812/1 Operating and maintenance manual
Description
A mid load rope holding clutch, for conventional and low stretch lines of
8-12mm. Product codes denote rope range in mm.
See www.spinlock.co.uk for full technical specification.
Use
Open the handle fully forward to the thread line through the clutch. With the
handle closed, the clutch will hold the rope automatically as the load is eased
from the winch. (Allow for a forward rope movement of up to 20mm (1”) as the
cam engages. Gripping performance on new rope will improve with use.
To Release: XTR clutches have a two stage release action. For the first stage
you feel no load on the handle. The second stage releases the line.
Installation
(11/32”) holes.
try to ensure that the most heavily loaded lines have the least deflection.
ex
raising the clutch using a wood or delrin (t.m.) pad.
nuts and washers.
watertight seal and easy removal.
fixings.
.
Powerclutch XTR
ées par
Spinlock.
öffentlichten Vertrags-
Bedingungen.
conditions.
Maintenance
maintenance in a harsh marine environment.
Service
To help ensure a long working life for every Spinlock product, we supply easily
installed parts and performance upgrades through Spinlock stockists worldwide.
See www.spinlock.co.uk for full listing.
General Guidance
Safety
Please take care to follow these important safety rules:
load.
product.
Safety Warning
Ltd.
Description
allongement de 8-12mm. Le code du produit correspondant à l'échelle des
Utilisation
Montage
utilisation.
Entretien
Service
contact avec Spinlock pour tout complément d'information.
Instructions
cordage utilisé, les cordages les plus gros et les plus fermes sont en général ceux
Sécurité
première fois.
ceci pour rait causer des dégats corporels et matériels.
Notice de securite
Description
A mid load rope holding clutch, for conventional and low stretch lines of
8-12mm. Product codes denote rope range in mm.
See www.spinlock.co.uk for full technical specification.
Use
Open the handle fully forward to the thread line through the clutch. With the
handle closed, the clutch will hold the rope automatically as the load is eased
from the winch. (Allow for a forward rope movement of up to 20mm (1”) as the
cam engages. Gripping performance on new rope will improve with use.
To Release: XTR clutches have a two stage release action. For the first stage
you feel no load on the handle. The second stage releases the line.
Installation
(11/32”) holes.
try to ensure that the most heavily loaded lines have the least deflection.
ex
raising the clutch using a wood or delrin (t.m.) pad.
nuts and washers.
watertight seal and easy removal.
fixings.
.
Beschreibung
ü
8-12mm.
Gebrauch
fiert die Leine.
Installation
Lage des Stoppers ermittelt werden.
aufweisen.
leichter öffnen.
.
Unterhalt
-
Buchsen.
Service
Sicherheit
Leine, Rigg und Stopper.
Sicherheits-Hinweis
Warranty
-
Garantie
réserve des conditions, limitations et exceptions ci-dessous. Toute pièce se
années sera remplacée ou réparée par Spinlock.
Garantie
ü
XTR ACCESSORIES
Model Max SWL at max line
diameter
Line Dia Weight Fasteners
XTR0812/1
SPECIFICATION
L
20
C
L
20
28
77
R110
6
6
pushed down
ensuring wire loop remains
hooked onto handle
1. Place handle on forward axle
slide forwards in slot until fully
inserted
2. Twist handle slightly to
loosen handle cap
3. Remove handle cap
