Splitvolt EGB 11-016 Setup guide

Splitvolt™ Extension and Adapter Cables
QuickStart User Guide
Extension models: EGB 11-016 / EGB 22-016 / EGB 33-016
Extension models: EGB 11-026 / EGB 22-026 / EGB 33-026
Adapter models: AGB 12-003 / AGB 31-003
Please read this manual before use.
Splitvolt, Inc.

Splitvolt™ Extension and Adapter Cables
Splitvolt™ extension cables are the perfect companion for Level 2 fast charging of your electric vehicle (EV) at home. At 16’5”
(5 meters) or 26’2” (8 meters) long, these extension cables let you safely extend the distance between your EV and your
dryer or other 240V socket.
Splitvolt adapter cables enable the flexibility to connect an EV charger equipped with a NEMA 10-30 interface to a NEMA
14-30 (dryer) or 14-50 socket.
Contact information
Splitvolt, Inc. [email protected]
3250 Victor Street, Unit B www.splitvolt.com
Santa Clara, CA 95054
Splitvolt™ Extension Cable
Models covered in this guide
If you’re using a standard 30-amp dryer plug, choose the length of the extension 16’5” (5 meters) or 26’2” (8 meters) model
whose male end corresponds to your plug type (NEMA 10-30 or 14-30). If your electrician has installed a standard 50-amp
circuit, choose one of the 14-50 models.
Splitvolt, Inc. 2
Model
SKU
UPC
Male NEMA
Female NEMA
Length
Electrical
Splitvolt EGB 11-016
EGB-11-016-30A-00
850019012606
10-30
10-30
16’5”
(5 meters)
240V 30A
Splitvolt EGB 11-026
EGB-11-026-30A-00
850019012637
10-30
10-30
26’2”
(8 meters)
240V 30A
Splitvolt EGB 22-016
EGB-22-016-30A-00
850019012613
14-30
14-30
16’5”
(5 meters)
240V 30A
Splitvolt EGB 22-026
EGB-22-026-30A-00
850019012644
14-30
14-30
26’2”
(8 meters)
240V 30A
Splitvolt EGB 33-016
EGB-33-016-50A-00
850019012620
14-50
14-50
16’5”
(5 meters)
240V 50A
Splitvolt EGB 33-026
EGB-33-026-50A-00
850019012651
14-50
14-50
(26’2”)
(8 meters)
240V 50A

Features and capabilities
●Convenience: the long 16’5” (5 meters) or 26’2” (8 meters) extension cable gives you more flexibility in charging your EV
●Connects to 240V NEMA 10-30 or 14-30 30-amp dryer plug found in most homes, or NEMA 14-50 plug if you have
upgraded 50-amp circuitry
●Cable specification: STW-10AWG (30 amp) or STW-8AWG (50 amp), ensuring all-weather use
●Safety certifications: UL certified
●Warranty: a full 1-year warranty is included for peace of mind
●Ease of use: just plug it into your dryer plug or other 240V plug and connect it to your EV charger
Specifications
Splitvolt, Inc. 3
Description
EGB 11-016, EGB 11-026
EGB 22-016,
EGB 22-026
EGB 33-016, EGB 33-026
Length
16’5” (5 meters) (EGB 11-016, 22-016, 33-016)
26’2” (8 meters) (EGB 11-026, 22-026, 33-026)
Interfaces
(1 male, 1 female)
NEMA 10-30
NEMA 14-30
NEMA 14-50
Cable type
STW service: elastomer oil resistant jacket, all-weather
Certification
UL
Color
Black
Wire gauge
10AWG
8AWG
Wire diameter (per solid conductor)
2.588 mm
3.264 mm
Wire cross-sectional diameter
5.261 mm2
8.367 mm2

Splitvolt™ Adapter Cable
Models covered in this guide
Features and capabilities
●Convenient 1’7” (half-meter) length
●Allow connectors to be adapted from NEMA 14-30 to 10-30 or from NEMA 10-30 to 14-50.
●NOTE: When using an AGB 31-003 adapter cable you must manually set your car / EV charger to a maximum charge rate
of 24amps.
●Cable specification: STW-10AWG (30 amp) or STW-8AWG (50 amp), ensuring use in all-weather conditions
●Safety certifications: UL certified components
●Warranty: a full 1-year warranty is included for peace of mind
●Ease of use: just plug it into your dryer plug or other 240V plug and connect it to your EV charger
Specifications
Disclaimers, Warranty, and Troubleshooting
Disclaimers
By using this product, you acknowledge that it is an early-release version that is made up of UL safety certified parts.
Extension cables should be protected from cuts, puncture, sharp bends, crushing weight, or excessive exposure to weather. They should never be
submerged in water. If you suspect an extension cord has been damaged, immediately cease use and replace it or have it inspected by a qualified
electrician.
Using extension cables with 240V power over long distances, or daisy-chained together, may reduce voltage outside of the 220V-240V operating
range.
The EGB 11 and EGB 22 models of this product are designed to operate at a maximum continuous charging rate of 24 amps on a standard
household 30-amp circuit, according to the National Electrical Code (NEC). Exceeding this rate can lead to damage or risk of fire.
The EGB 33 models are designed to operate at a maximum continuous charging rate of 40 amps on a standard household 50-amp circuit,
according to the National Electrical Code (NEC). Exceeding this rate can lead to damage or risk of fire.
When using an AGB 31 adapter cable you must manually set your car / EV charger to a maximum charge rate of 24 amps. Failure to do so can
result in over-powering of the circuitry and tripping of your home electrical breaker, or risk of fire.
Splitvolt, Inc. 4
Model
SKU
UPC
Male NEMA
Female NEMA
Length
Electrical
Splitvolt AGB 12-003
AGB-12-003-30A
850019012705
14-30
10-30
1’7”
(.5 meters)
240V 30A
Splitvolt AGB 31-003
AGB-31-003-30A
850019012712
10-30
14-50
1’7”
(.5 meters)
240V 30A
Description
AGB 12-003
AGB 31-003
Length
1’7” (.5 meters)
26’2” (8 meters)
Interfaces
Male 14-30 x Female 10-30
Male 10-30 x Female 14-50
Cable type
STW service: elastomer oil resistant jacket, all-weather
Certification
UL certified components
Color
Black
Wire gauge
10AWG
8AWG
Wire diameter (per solid conductor)
2.588 mm
3.264 mm
Wire cross-sectional diameter
5.261 mm2
8.367 mm2

These products are for use with standard home wiring that is built and maintained to the latest National Electrical Code (NEC) safety standards. If
you suspect that your home wiring does not meet code, or is worn-out or damaged in some fashion, contact an electrician for a safety inspection
prior to using this product.
1-year limited warranty
Splitvolt, Inc warrants that this product shall be free from defects in material, workmanship and assembly, under normal use, in accordance with
the specifications and warnings, for a period of one year from the date of purchase. This warranty does not cover damages as a result of an
accident; resulting from the use or misuse of parts not manufactured or sold by Splitvolt, Inc; or resulting from modification of the Splitvolt
Extension Cable or Adapter Cable.
These warranties extend only to the original purchaser of the product and are not transferable. To exercise your rights under this warranty, you
must provide proof of purchase in the form of an original sales receipt that shows the product name and the date of purchase. These warranties
apply only to natural purchasers of Splitvolt cables for personal, family, or household use, not to commercial, institutional, or industrial
purchasers. These warranties are valid only in the United States. In no event shall Splitvolt, Inc. be liable for any direct, indirect, incidental, special,
consequential, or multiple damages arising out of the use of the Splitvolt cable devices.
Troubleshooting
If you are experiencing difficulty, please check our website (www.splitvolt.com), and then contact us if you are still unable to
resolve.
Need more help?
Please visit www.splitvolt.com, email [email protected], or call [phone] and leave a message with your contact
information, product model number and the issue you are experiencing.
Splitvolt, Inc. 5