Stairmaster StepMill SM5 User manual

SM5/SC5 Touch Screen Console Quick Reference
Sheet
1. How to Access the Maintenance Menu
A. Touch the upper left corner of the touchscreen.
B. Touch the upper right corner of the touchscreen.
C. Touch the Stairmaster logo in the middle of the touchscreen.
D. The Maintenance Screen will display.
2 Maintenance Screen

3 Defaults
The Default screen allows the user to customize the defaults for Quick Start.
Defaults are
Weight –173
Workout Time 20 Minutes
Age 35
Target HR% 80
Start Level 1
Step Rate 20 Min
4 Customize
Change Units - Allows the user to change the
Units Metric/English
Languages –Allows the user to change 8
different Languages: English, German, Italian,
Dutch, French. Portuguese, Spanish, Japanese.
5 Machine Status
Maintenance Status shows the Run Hours,
Workouts, Floors, Unit Configuration
Stepmill/Stepclimber, and Maintenance Hours
on the left side. All Processor, software etc is
located on the right side.

6 R and D is not Available.
7 Diagnostics
Diagnostics contains:
Alt Test On/Off –Alternator test
Tach Test 2000 Desired 0000Actual
Heart Rate Test
8 Maintenance Logs
Maintenance records Location 5 Slots
9 Configuration
Equipment Type –StepMill/StepClimber
Max Time 20- 180
CSAFE
Cursor On/Off –allows screen cursor

10 Utilities
TV Tuner Setup –TV configuration/Setup
Load Software - Software load point USB
Touch Screen Calibration –used to setup initial touch screen position
Reset Configuration Resets configuration to factory
Real Time Clock set up unit clock Day and Date
11 TV Tuner Setup
A. Standard setup
B. DTVCable should be set
Press Scan button to scan for channel Control Menu allows additional channels, additional volume controls
Screen positioning

Programs Available
Building Floors Option
USB/Sound Jack
CSAFE Connection