Stairville CLB4 User manual

Compact LED-Bar
4 TriPAR CLB4
LED lighting set
user manual

Musikhaus Thomann e.K.
Treppendorf 30
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
08.02.2013

Table of contents
1 General notes............................................................................................................................................... 5
2 Safety instructions..................................................................................................................................... 8
3 Features....................................................................................................................................................... 12
4 Installation.................................................................................................................................................. 13
5 Starting up.................................................................................................................................................. 18
6 Connections and operating elements........................................................................................... 21
7 Operation.................................................................................................................................................... 24
7.1 Starting up the device.................................................................................................................... 24
7.2 Device functions............................................................................................................................... 24
7.3 Foot switch......................................................................................................................................... 25
7.4 Main menu.......................................................................................................................................... 26
7.5 Menu overview................................................................................................................................. 33
7.6 Functions in 2-channel DMX mode........................................................................................... 35
7.7 Functions in 3-channel DMX mode........................................................................................... 36
7.8 Functions in 4-channel DMX mode........................................................................................... 37
Table of contents
Compact LED-Bar 4 TriPAR CLB4
3

7.9 Functions in 7-channel DMX mode........................................................................................... 37
7.10 Functions in 8-channel DMX mode........................................................................................ 40
7.11 Functions in 14-channel DMX mode (mode 4)................................................................... 41
8 Technical specifications....................................................................................................................... 43
9 Troubleshooting...................................................................................................................................... 44
10 Cleaning....................................................................................................................................................... 46
11 Protecting the environment.............................................................................................................. 47
Table of contents
LED lighting set
4

1 General notes
This user manual contains important information on safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to other users, be sure
that they also receive this manual.
Our products are subject to a process of continuous development. We therefore reserve the
right to make changes without notice.
General notes
Compact LED-Bar 4 TriPAR CLB4
5

This section provides an overview of the symbols and signal words used in this user manual.
Signal word Meaning
DANGER! This combination of symbol and signal word
indicates an immediate dangerous situation
that will result in death or serious injury if it is
not avoided.
WARNING! This combination of symbol and signal word
indicates a possible dangerous situation that
can result in death or serious injury if it is not
avoided.
NOTICE! This combination of symbol and signal word
indicates a possible dangerous situation that
can result in material and environmental
damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Symbols and signal words
General notes
LED lighting set
6

Warning signs Type of danger
Warning – danger zone.
General notes
Compact LED-Bar 4 TriPAR CLB4
7

2 Safety instructions
This device is intended to be used as an electronic illumination effect using LED technics. Use
the device only as described in this user manual. Any other use or use under other operating
conditions is considered to be improper and may result in personal injury or property damage.
No liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
Intended use
Safety
Safety instructions
LED lighting set
8

DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or fire. If in doubt, seek advice from a regis‐
tered electrician.
Safety instructions
Compact LED-Bar 4 TriPAR CLB4
9

WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons
should avoid looking at strobe lights.
NOTICE!
Risk of fire
Do not cover the device nor any ventilation slots. Do not place the device near
any direct heat source. Keep the device away from naked flames.
Safety instructions
LED lighting set
10

NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or fire.
Safety instructions
Compact LED-Bar 4 TriPAR CLB4
11

3 Features
The LED lighting set is particularly suitable for lighting applications in clubs or discos, on rock
stages as well as in theatres and musicals.
Special features of this device:
n4 LED spots with 7 TRI-Colour LEDs each
nControl via DMX (6 different modes)
n16 preprogrammed automatic shows
nSound control
nMaster / slave mode
nEasy transport, easy mounting
nAn additional carrying bag is included.
Features
LED lighting set
12

4 Installation
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the device against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
NOTICE!
Risk of overheating
Always ensure sufficient ventilation.
The ambient temperature must always be below 40 °C (104 °F).
Installation
Compact LED-Bar 4 TriPAR CLB4
13

NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX output to audio devices such as mixers or amplifiers.
Installation
LED lighting set
14

The unit offers a 3-pin XLR socket for DMX output and a 3-pin XLR plug for DMX input. Please
refer to the drawing and table below for pin the assignment of a suitable XLR plug.
Pin Configuration
1 Ground, shielding
2 Signal inverted (DMX–, ‘cold signal’)
3 Signal (DMX+, ‘hot signal’)
DMX connections
Installation
Compact LED-Bar 4 TriPAR CLB4
15

The four sports (1 … 4, right to left) are pre-mounted on the T-bar.
A Locking screw for fixing the inclination angle.
B Locking screw for fixing the spots on the T-bar and the horizontal orientation
(dispersion direction).
C Electrical connection of the spot at the T-bar (pre-mounted).
Pre-mounted spots
Installation
LED lighting set
16

D 1/4" phone socket to connect a foot controller.
E Flange 36 mm to attach the T-bar on a tripod.
Installation
Compact LED-Bar 4 TriPAR CLB4
17

5 Starting up
Establish all connections as long as the unit is switched off. Use the shortest possible high-
quality cables for all connections.
Starting up
LED lighting set
18

Connect the DMX input of the device to the DMX output of a DMX controller or another DMX
device. Connect the output of the first DMX device to the input of the second one, and so on
to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain
is terminated with a resistor (110 Ω, ¼W).
Connections in DMX mode
Starting up
Compact LED-Bar 4 TriPAR CLB4
19

When the display is flashing in ‘DMX’ mode, no DMX signal is received. Perhaps the DMX con‐
troller is off or the wiring is incorrect. If the display lights up solid, the device is receiving a valid
DMX signal.
When you configure a group of devices in master/slave mode, the first unit will control the
other units for an automatic, sound-activated, synchronized show. This function is ideal when
you want to start a show immediately. Connect the DMX output of the master device to the
DMX input of the first slave device. Then connect the DMX output of the first slave device to
the DMX input of the second slave device and so on.
DMX indicator
Connections in master/slave
mode
Starting up
LED lighting set
20