Stairville CLB4 User manual

Compact LED-Bar
4 TriPAR CLB4
LED lighting set
user manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
17.08.2015, ID: 298052 (V2)

Table of contents
1 General notes............................................................................................................................................... 5
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 7
2 Safety instructions..................................................................................................................................... 9
3 Features....................................................................................................................................................... 15
4 Installation.................................................................................................................................................. 16
5 Setup.............................................................................................................................................................. 21
6 Connections and controls................................................................................................................... 24
7 Operation.................................................................................................................................................... 30
7.1 Starting up the device.................................................................................................................... 30
7.2 Device functions............................................................................................................................... 30
7.3 Footswitch.......................................................................................................................................... 31
7.4 Remote control................................................................................................................................. 32
7.5 Operating controls on the unit................................................................................................... 34
Table of contents
Compact LED-Bar 4 TriPAR CLB4
3

7.6 Menu diagram................................................................................................................................... 41
7.7 Functions in 2-channel DMX mode........................................................................................... 43
7.8 Functions in 3-channel DMX mode........................................................................................... 44
7.9 Functions in 4-channel DMX mode........................................................................................... 45
7.10 Functions in 7-channel DMX mode........................................................................................ 45
7.11 Functions in 8-channel DMX mode ....................................................................................... 47
7.12 Functions in 14-channel DMX mode...................................................................................... 48
8 Technical specifications....................................................................................................................... 50
9 Plug and connection assignments.................................................................................................. 51
10 Troubleshooting...................................................................................................................................... 52
11 Cleaning....................................................................................................................................................... 54
12 Protecting the environment.............................................................................................................. 55
Table of contents
LED lighting set
4

1 General notes
This manual contains important instructions for the safe operation of the unit. Read and follow
the safety instructions and all other instructions. Keep the manual for future reference. Make
sure that it is available to all those using the device. If you sell the unit please make sure that
the buyer also receives this manual.
Our products are subject to a process of continuous development. Thus, they are subject to
change.
General notes
Compact LED-Bar 4 TriPAR CLB4
5

1.1 Further information
On our website (www.thomann.de) you will find lots of further information and details on the
following points:
Download This manual is also available as PDF file for you to download.
Keyword search Use the search function in the electronic version to find the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the
customer service will gladly assist you.
General notes
LED lighting set
6

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’, ‘OFF’.
1.3 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal words that are
used in this manual.
Letterings
Displays
General notes
Compact LED-Bar 4 TriPAR CLB4
7

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in death or serious
injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – danger zone.
General notes
LED lighting set
8

2 Safety instructions
This device is intended to be used as an electronic illumination effect using LED technics. The
device is designed for professional use and is not suitable for use in households. Use the
device only as described in this user manual. Any other use or use under other operating con‐
ditions is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sufficient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Intended use
Safety instructions
Compact LED-Bar 4 TriPAR CLB4
9

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
Safety
Safety instructions
LED lighting set
10

DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a pro‐
tective contact plug. Do not modify the mains cable or the plug. Failure to do so
could result in electric shock/death or fire. If in doubt, seek advice from a regis‐
tered electrician.
WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons
should avoid looking at strobe lights.
Safety instructions
Compact LED-Bar 4 TriPAR CLB4
11

NOTICE!
Risk of fire
Do not cover the device nor any ventilation slots. Do not place the device near
any direct heat source. Keep the device away from naked flames.
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and
strong vibrations.
Safety instructions
LED lighting set
12

NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or fire.
NOTICE!
Risk of fire due to incorrect polarity
Incorrectly inserted batteries may destroy the device or the batteries.
Ensure that proper polarity is observed when inserting batteries.
Safety instructions
Compact LED-Bar 4 TriPAR CLB4
13

NOTICE!
Possible damage by leaking batteries
Leaking batteries can cause permanent damage to the device.
Take batteries out of the device if it is not going to be used for a longer period.
Safety instructions
LED lighting set
14

3 Features
The LED lighting set is particularly suitable for lighting applications in clubs and discotheques,
on rock stages, in theatres and musicals.
Special features of this device:
n4 spots with 7 TRI-Colour LEDs each
nControl via DMX (6 different modes), buttons and display on the unit and remote control
n16 preprogrammed automatic shows
nSound control
nMaster / Slave mode
nEasy transport, easy mounting
nAn additional carrying bag is included
Features
Compact LED-Bar 4 TriPAR CLB4
15

4 Installation
Unpack and carefully check that there is no transportation damage before using the unit. Keep
the equipment packaging. To fully protect the device against vibration, dust and moisture
during transportation or storage use the original packaging or your own packaging material
suitable for transport or storage, respectively.
NOTICE!
Risk of overheating
Always ensure sufficient ventilation.
The ambient temperature must always be below 40 °C (104 °F).
Installation
LED lighting set
16

NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐
fiers.
Installation
Compact LED-Bar 4 TriPAR CLB4
17

The four sports (1 … 4, right to left) are pre-mounted on the T-bar.
A Locking screw for fixing the inclination angle.
B Locking screw for fixing the spots on the T-bar and the horizontal orientation
(dispersion direction).
C Electrical connection of the spot at the T-bar (pre-mounted).
Pre-mounted spots
Installation
LED lighting set
18

D 1/4" phone socket to connect a foot controller.
E Flange 36 mm to attach the T-bar on a tripod.
The infra red receiver for the IR remote control signals is located on the front panel of the
device. Make sure that it is not obstructed.
Infra red sensor for the IR
remote control signal.
Installation
Compact LED-Bar 4 TriPAR CLB4
19

Press the lock of the battery holder to the centre of the housing and pull out the battery holder
like a drawer. Insert the battery. The battery is correct if the positive pole points to the housing
base of the remote control. Slide the battery holder back into the remote until it clicks into
place.
When shipping, the battery is already installed in the remote and protected against discharge
by a transparent plastic foil. Remove the plastic foil prior to first use.
Inserting the battery into the
remote control
Installation
LED lighting set
20