Stairville 640R User manual

LED Pixel Rail Drive 640R
Controller
User Manual

Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
Internet: www.thomann.de
23.09.2022, ID: 474676 (V2)

Table of contents
1 General information................................................................................................................................. 5
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 6
1.3 Symbols and signal words............................................................................................................... 7
2 Safety instructions..................................................................................................................................... 9
3 Features....................................................................................................................................................... 12
4 Installation and starting up................................................................................................................ 13
5 Connections and controls................................................................................................................... 18
6 Operating.................................................................................................................................................... 22
6.1 Menu overview................................................................................................................................. 26
6.2 Functions in 10-channel DMX mode........................................................................................ 27
6.3 Functions in 55-channel DMX mode........................................................................................ 28
6.4 Network connection....................................................................................................................... 29
7 Technical specications....................................................................................................................... 30
8 Plug and connection assignment.................................................................................................... 32
9 Cleaning....................................................................................................................................................... 34
10 Protecting the environment.............................................................................................................. 35
Table of contents
LED Pixel Rail Drive 640R 3
Controller

4LED Pixel Rail Drive 640R
Controller

1 General information
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under www.thomann.de.
General information
LED Pixel Rail Drive 640R 5
Controller

1.1 Further information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search Use the search function in the electronic version to nd the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
1.2 Notational conventions
This manual uses the following notational conventions:
General information
6LED Pixel Rail Drive 640R
Controller

The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’ , ‘OFF’ .
1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Letterings
Displays
General information
LED Pixel Rail Drive 640R 7
Controller

Warning signs Type of danger
Warning – high-voltage.
Warning – danger zone.
General information
8LED Pixel Rail Drive 640R
Controller

2 Safety instructions
This device is used to control Pixel Rail Strips (item no.: 449739). Use the device only as
described in this user manual. Any other use or use under other operating conditions is consid‐
ered to be improper and may result in personal injury or property damage. No liability will be
assumed for damages resulting from improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Safety
DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking
hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and
choke! Never let children unattended use electrical devices.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts
inside. Do not use the device if covers, protectors or optical components are missing or damaged.
Intended use
Safety instructions
LED Pixel Rail Drive 640R 9
Controller

DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a protective contact plug. Do not modify the mains cable
or the plug. Failure to do so could result in electric shock/death or re. If in doubt, seek advice from a registered electrician.
NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked ames.
NOTICE!
Operating conditions
This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid
direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specied in the chapter
‘Technical specications’ of this user manual. Avoid heavy temperature uctuations and do not switch the device on immediately
after it was exposed to temperature uctuations (for example after transport at low outside temperatures). Dust and dirt inside can
damage the unit. When operated in harmful ambient conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by
qualied service personnel at regular intervals to prevent overheating and other malfunction.
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC
outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly injure the
user. Unplug the device before electrical storms occur and when it is unused for long periods of time to reduce the risk of electric
shock or re.
Safety instructions
10 LED Pixel Rail Drive 640R
Controller

NOTICE!
Fire hazard due to exceedance of the maximum current
The device can power other devices of identical construction. The current consumption of all other devices connected in series must
not exceed the values indicated in the technical specications. Otherwise you risk injuries and irreparable damages to the device.
Only connect so many identical devices that the maximum current consumption is not exceeded. Ensure the sucient dimensioning
(wire cross section) of the power cables used for all devices connected in series.
NOTICE!
Possible damage due to installation of a wrong fuse
The use of dierent types of fuses can cause serious damage to the unit. Fire hazard! Only fuses of the same type may be used.
NOTICE!
Possible staining
The plasticiser contained in the rubber feet of this product may possibly react with the coating of your surface and after some time
cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the surface and use a suitable underlay if neces‐
sary, i.e. felt pads or similar.
NOTICE!
Wiring
Follow the wiring instructions in the user manual.
NOTICE!
Compatible devices
This device may only be operated with the Stairville Pixel Rail 40 RGB MKII LED-strip (item no. 449739).
Safety instructions
LED Pixel Rail Drive 640R 11
Controller

3 Features
nController for up to 16 pixel rail strips (maximum four per output) of the type
Stairville LED Pixel Rail 40 RGB MKII (Item no.: 449739)
nControl protocols: DMX (10/55 channels), ArtNet (4x480 channels), RDM
nOperating modes: Stand Alone (30 programmes), Master / slave
nIn and outputs: DMX, RJ45 (ArtNet)
nOperating via buttons and display on the unit
nLockable connections (Power Twist) for self-supply and to supply further devices
nConvection cooling
nRobust die-cast aluminium housing, black
Features
12 LED Pixel Rail Drive 640R
Controller

4 Installation and starting up
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
Connect the units to be controlled via suitable DMX or RJ45 data cable to the device. A max‐
imum of 30 additional DMX devices may be serially connected to each serial port.
Create all connections while the device is o. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
The device is designed for mounting in 19" racks, it occupies two rack units (RU).
The following gures show the connection conguration of the pixel strips in the various oper‐
ating modes.
Rack mounting
Connection examples
Installation and starting up
LED Pixel Rail Drive 640R 13
Controller

120 Ω
120 Ω
DMX IN
DMX OUT
DMX OUT
DMX IN
DMX IN
DMX OUT
PUSH
4
5
PUSH
PUSH
4
5
PUSH
PUSH
4
5
PUSH
Master
Slave
Slave
Master / Slave operation
Installation and starting up
14 LED Pixel Rail Drive 640R
Controller

ARTNET IN
ARTNET IN
PUSH
4
5
PUSH
PUSH
4
5
PUSH
ARTNET OUT
Control via ArtNet
Installation and starting up
LED Pixel Rail Drive 640R 15
Controller

120 Ω
DMX OUT
DMX IN
DMX OUT
DMX IN
DMX CONTROLLER
PUSH
4
5
PUSH
PUSH
4
5
PUSH
NOTICE!
Possible data transmission errors
For error-free operation make use of dedicated DMX cables and do not use ordi‐
nary microphone cables.
Never connect the DMX input or output to audio devices such as mixers or ampli‐
ers.
Control via DMX
Installation and starting up
16 LED Pixel Rail Drive 640R
Controller

A maximum of four Stairville LED Pixel Rail 40 RGB MKII may be connected per output. The
maximum permissible total cable length of 80 m must not be exceeded. Keep cable runs as
short as possible to ensure trouble-free operation.
Bar 3Bar 2Bar 1 Bar 4
Bar 3Bar 2Bar 1 Bar 4
LED Pixel
Rail Drive 640R
Notes on wiring
Installation and starting up
LED Pixel Rail Drive 640R 17
Controller

5 Connections and controls
Pixel Rail Drive 640R
ö #
$%&'
Front panel
Connections and controls
18 LED Pixel Rail Drive 640R
Controller

1 Display
2[SIGNAL] | Indicator LED. This LED lights up on incoming signal.
3[MODE] | Activates the main menu and toggles between menu items. Closes an opened submenu.
4[ENTER] | Selects an option of the respective operating mode, conrms the set value.
5[UP] | Increases the displayed value by one.
6[DOWN] | Decreases the displayed value by one.
Connections and controls
LED Pixel Rail Drive 640R 19
Controller