Standard Furniture Carrington 17024 User manual

Page: 1/2
MADE IN VIETNAM

Page: 2/2
MADE IN VIETNAM
A:Chair Back
1
5
3
7
2
5
3
7

Page: 1/3
MADE IN VIETNAM

Page: 2/3
MADE IN VIETNAM
A:Chair Back
1
5
3
7
2
5
3
7

Step 3
Page: 3/3
MADE IN VIETNAM
6
4
8
8
3
6
Step 2: Attach Arm rest (D) to the Seat Cushion (B) by using Flat Washer (4), Lock Washer (6), Allen Bolt (3) Secure
by Allen Key (8)
Attach Arm rest (D) to Chair Back (A) by using Lock Washer (6), Allen Bolt (3) Secure by Allen Key (8)

ASSEMBLY INSTRUCTIONS
Read instruction carefully prior for assembly
Thank you for purchasing this product . Be sure to check all packing material carefully for small parts that
may have come loose inside the carton during shipment .
Remove all components from pack and place on soft surface to prevent
scratch during assembly. Identify and count all parts as specified below
PARTS LIST:
No. Description Quantity
A
B
Hutch
Page: 1/2
MADE IN VIETNAM
It is recommended to use two people during the assembly process.
Buffet
1
2
Hutch(A)
Hardware pack location(s): Inside the box

ASSEMBLY INSTRUCTIONS
Page: 2/2
MADE IN VIETNAM

ASSEMBLY INSTRUCTIONS
Read instruction carefully prior for assembly
Thank you for purchasing this product . Be sure to check all packing material carefully for small parts that
may have come loose inside the carton during shipment .
Remove all components from pack and place on soft surface to prevent
scratch during assembly. Identify and count all parts as specified below
PARTS LIST:
No. Description Quantity
A
B
Table Top
Post
Page: 1/2
MADE IN VIETNAM
Base
It is recommended to use two people during the assembly process.
Extender top
C
D
EWood connector
Ø5/16" x 40mm
Table Top Extender Top
Post
Base

ASSEMBLY INSTRUCTIONS
Page: 1/2
MADE IN VIETNAM
STEP 2:
5
2
3
4
1
4
23
Step1: Place Post (C) on the floor. Attach Base (D) to Post (C) by using Flat washer (3), Lock Washer (2), Allen Bolt (5),
Secure by Allen Key (4).
Post(C)
Base(D)
Step 2: Attach Wood connector (E) to Post (C) by using Flat Washer (3) , Lock Washer (2), Allen Bolt (1) Secure by
Allen Key (4).
Wood connector(E)
Base(D)
STEP 1:

ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
STEP 4:
STEP 5: STEP 6:
Page: 2/2
Step 4: Pull out Table Top (A) each side .
Step 5: Put Extender top (B) on Table Top (A) . Step 6: Push two side tops that reach these leafs then lock
them by using Sash lock .
OPEN
1
4
21
3
Step 3: Attach Wood connector (E) to Wood
connector of Table Top (A) by using Flat Washer (3) ,
Lock Washer (2), Allen Bolt (1) Secure by Allen Key (4).
STEP 3:
Extender top(B)