STARKE ARVID Inlift User manual

Inlift
Version 1
05/10/07
Instructions for Use

General use and safety regulations:
• Maximum load must not be exceeded.
• Place the load centrally on the Inlift.
• Always secure the load with clampers.
• Check the load rings and lifting equipment before use.
• Make sure that the load supports are correctly assembled.
• Under no circumstances may any person be allowed under the load.
• Use the necessary safety equipment.
• Always use an approved safety harness system when using the Inlift Frame.
General maintenance and care instructions:
• All mobile parts must be greased once a month.
• Check all mobile parts as well as wheels and other
material at least once a year.
• Remove any outer rust and coat with anti-corrosive paint..
• Replace worn parts.
• Check the lifting rings with crack indication spray.
• When unsure, contact Alia AB.
Dear Customer!
Thank you for choosing a STARKE ARVID® product.
We have more than 25 years of experience within the construction business. We develop,
manufacture and sell equipment intended for professional material management. Starke
Arvid´s product assortment includes a total of 20 different products.
Browse in at www.starkearvid.se

Lifting ring
Folding pole
Three-part chain
Fork socket for loading of
gypsum boards
Re-adjustable
load supporters
Lifting ring
Cotter pin for folding of folding poles
Coated steel wheel
Lifting ring

Alia AB
Box 93
SE-459 22 LJUNGSKILE Phone: [phone]
Fax: [phone]
offi[e-mail]
www.starkearvid.se
Inlift
Articlel no: 20000
Maximum load: 2500 kg
Width: 1000/1300 mm
Height (without load supports): 630 mm
Length: 4250 mm
Weight: 325 kg
Produced and
marketed by:
Technical Data
Service/Extra parts:
A number of retailers for STARKE ARVID® products are available for your basic security. If you have
any questions regarding service or extra parts turn to you nearest retailer or directly to ALIA AB.
Gaurantee:
Under the condition that all instructions for use have been followed,
we offer a one-year guarantee according to NL 01.
The product may not be modied by the user.