STARKE ARVID 23000 User manual

Instructions for Use
Board & Material Lift
Version 1
05/10/07

General use and safety regulations:
• Maximum load must not be exceeded.
• Place the load centrally on the lifting beam.
• Check for any damage to the wire before use.
• Check for any damage to the castor.
• Use the necessary safety equipment.
• Check the winch according to separate instructions for use.
• Under no circumstances may the lift be driven with a raised load.
• In order to avoid pinning in connection to winching the plastic coated handle should be held.
• When winching down, make sure that the trolley follows smoothly down and does not catch and fall.
General maintenance and care instructions:
• All mobile parts must be greased once a month.
N.B.! there are special greasing and care instructions for the winch, see separatet instructions for use.
• Check all mobile part as well as welding joints, wheels and other material at least once a year.
• Remove any outer rust and coat with anti-corrosive paint..
• Replace worn parts.
• When unsure, contact Alia AB.
Dear Customer!
Thank you for choosing a STARKE ARVID® product.
We have more than 25 years of experience within the construction business. We develop,
manufacture and sell equipment intended for professional material management. Starke
Arvid´s product assortment includes a total of 20 different products.
Browse in at www.starkearvid.se

Pin for changing of base area
Winch
2 off. braked castors
Beam attachment, adjustment to
horizontal/angled postition
Adjustable sheet beam
Handle for manoeuvring of
Board Lift
Adjustable beam
attachment Trolley

Adjustable chassis
Beam attachment In order to avoid pinching risks when winching,
hold the plastic-coated handle.
Winch
Plastic-coat-
ed handle
Extender
Extra
Equipment

Alia AB
Box 93
SE-459 22 LJUNGSKILE Phone: [phone]
Fax: [phone]
offi[e-mail]
www.starkearvid.se
Board & Material Lift Board &
Material Lift Extra Equipment:
Extender
Articlel no: 23000
Maximum load: 100 kg
Maximum load with extender: 50 kg
Width: 810 mm
Length: 810 mm
Heigth: 2040 mm
Lifting height, lower level: 850 - 3,350 mm
Lifting height, upper level: 1,250 - 3,750 mm
Lifting height with extender, lower level: 1,950 – 4,450 mm
Lifting height with extender: 2,450 - 4,950 mm
Weight: 54 kg
Wheels (type): (dubble braked castor with bearings)
2 off. 100 mm
2 off. braked 100 mm
Produced and
marketed by:
Technical Data
Service/Extra parts:
A number of retailers for STARKE ARVID® products are available for your basic security. If you have
any questions regarding service or extra parts turn to you nearest retailer or directly to ALIA AB.
Gaurantee:
Under the condition that all instructions for use have been followed,
we offer a one-year guarantee according to NL 01.
The product may not be modied by the user.