StarTech.com MSDREADU3CA User manual

Manual Revision: 11/06/2015
For the latest information, technical specications, and support for
this product, please visit www.startech.com/MSDREADU3CA.
FR: Guide de l’utilisateur - fr.startech.com
DE: Bedienungsanleitung - de.startech.com
ES: Guía del usuario - es.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
IT: Guida per l’uso - it.startech.com
MSDREADU3CA
MicroSD to USB 3.0 Card Reader Adapter -
USB-C and USB-A
*actual product may vary from photos

Instruction manual
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Changes or modications not expressly approved by StarTech.com could void the user’s
authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.

Instruction manual
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other
protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not
represent an endorsement of a product or service by StarTech.com, or an endorsement of the
product(s) to which this manual applies by the third-party company in question. Regardless
of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby
acknowledges that all trademarks, registered trademarks, service marks, and other protected
names and/or symbols contained in this manual and related documents are the property of
their respective holders.

Instruction manual
i
Table of Contents
Introduction............................................................................................1
Packaging contents.................................................................................................................................. 1
System requirements............................................................................................................................... 1
About USB 3.0 and USB 3.1 Gen 1....................................................................................................... 1
Product diagram ....................................................................................2
Use the MSDREADU3CA........................................................................4
Eject a microSD card..............................................................................4
Technical support...................................................................................5
Warranty information............................................................................5

Instruction manual
1
Introduction
The MSDREADU3CA provides a quick and easy way to transfer photos and videos from
a microSD™ card to a computer or tablet that’s enabled with a USB-C™ port or a USB-A
port.
Packaging contents
• 1 x microSD to USB 3.0 card reader adapter - USB-C and USB-A
• 1 x instruction manual
System requirements
• microSD card
• Host device (USB Type-C™ or Type-A enabled computer or tablet, or a smartphone
with host functionality)
System requirements are subject to change. For the latest requirements, please visit
www.startech.com/MSDREADU3CA.
About USB 3.0 and USB 3.1 Gen 1
USB 3.0 is also known as USB 3.1 Gen 1. This connectivity standard oers speeds up to
5Gbps.
About card support
The MSDREADU3CA supports the following card types:
• microSD
• microSDHC™
• microSDXC™

Instruction manual
2
Product diagram
USB-C plug
Eject button
USB 3.0 A plug
Port cover
microSD card slot

Instruction manual
3
Product diagram
microSD card slot

Instruction manual
4
Use the MSDREADU3CA
1. Flip up the port cover.
2. Gently slide a microSD card into the microSD slot on the MSDREADU3CA until you
feel resistance and the card is fully inserted. No part of the microSD card should stick
out of the end of the card reader.
Tip! To protect and prevent the loss of the microSD card, you should place the port
cover over the USB Type-A and microSD port when not in use.
3. Do one of the following:
• Connect the USB Type-C plug on the MSDREADU3CA to the USB Type-C port on
your host computer.
• Connect the USB Type-A plug on the MSDREADU3CA to the USB Type-A port your
host computer.
Eject a microSD card
1. Follow the instructions for the operating system that you’re running to safely
remove the MSDREADU3CA from your computer.
2. Flip up the port cover.
3. Slide the Eject button on the MSDREADU3CA towards the Type-A port to eject the
microSD card.
4. Grasp the microSD card and remove it from the MSDREADU3CA.
Tip! When you’re not using the microSD card slot on the MSDREADU3CA, replace the
port cover over the port to protect it from damage.

Instruction manual
5
Technical support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
www.startech.com/support and access our comprehensive selection of online tools,
documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty information
This product is backed by a two-year warranty.
StarTech.com warrants its products against defects in materials and workmanship
for the periods noted, following the initial date of purchase. During this period,
the products may be returned for repair, or replacement with equivalent
products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
ocers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of prots, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.

Hard-to-nd made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you nd the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
Visit www.startech.com for complete information on all StarTech.com products and
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.