StarTech.com PCIX1PEX4 User manual

Warranty Information
This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or
replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products
from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages
(whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out
of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or
consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
PCIX1PEX4
PCI-X to x4 PCI Express Adapter Card
Installation Guide
Packaging Contents
• 1 x PCIX1PEX1 adapter card
• 1 x Spare Full Height Bracket
• 1 x Installation Guide
System Requirements
• PCI-X enabled computer system with
available PCI-X slot
• Computer chassis with full height expansion
card slots
Installation
1. Insert the low profile PCIe card into the PCIe slot connector on the top of the adapter card.
NOTE: The PCI-X bus can only handle up to x4 PCIe speeds. Faster cards will run at reduced
speeds.
*actual product may vary from photos
1
Manual Revision:09/08/2010
For the most up-to-date information, please visit www.startech.com

2. Set the jumpers on the card to manually force the PCI-X
clock speeds between 33 MHz and 133 MHz, if necessary.
33 MHz
133 MHz
(default)
Specications
Bus Interface
PCI-X 1.0 and PCI 3.0
(64-bit 3.3V slot connector)
PCI Express 1.0a
Chipset ID PLX PEX8114
Connectors x16 PCI Express slot
Operating
Temperature -40°C ~ 85°C (-40°F ~ 185°F)
Storage
Temperature -65°C ~ 150°C (-85°F ~ 302°F)
Dimensions
(LxWxH) 164.0mm x 40.0mm x 20.0mm
3. Install the adapter card into a PCI-X slot on the motherboard and secure the card bracket to the
computer chassis.
4. Power on the computer and load the
operating system. The PCIe card
should function as though connected
directly to the motherboard natively.
2