StarTech.com IDECASE35F Manual

3.5” External IDE Drive Case
IDECASE35F
IDECASE35U2 Instruction Guide
The Professionals’ Source For Hard-to-Find Computer Parts
EEXXTTEERRNNAALLDDRRIIVVEECCAASSEE
* Actual product may vary from photo
* IDECASE35U2 shown

FCC COMPLIANCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

1
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Connecting Your External Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Using Your External Case . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2
Introduction
Thank you for purchasing a StarTech.com 3.5” external storage device. Designed for 3.5”
hard drives, this device allows you to quickly connect and disconnect your hard drives,
making data storage, backup, and sharing easier than ever before. The IDECASE35U2
features USB 2.0 capabilities, meaning you’ll experience super-fast data transfer speeds
of up to 480 Mbits/sec. The IDECASE35F uses FireWire technology to reach data transfer
speeds of up to 400 Mbits/sec. With full Plug and Play capabilities, each device is a snap
to install and use.
Features
•IDECASE35U2 transfers data at speeds up to 480 Mbits/sec and is compatible with
most PC computers
•IDECASE35F transfers data at speeds up to 480 Mbits/sec and is compatible with
most PC and Mac computers
•Uses compact, lightweight aluminum design for easy storage and portability
•Complies with Plug and Play specifications
•Backed by StarTech.com’s one-year warranty
Before You Begin
To ensure a quick and easy device installation, please read through this section carefully
before attempting to install the device.
WARNING! Hard drives require careful handling, especially when being transported. If
you are not careful with your hard disk, lost data may result. Always handle your hard
drive and the storage device with caution. Hard drives, like all computer equipment, can
be severely damaged by static electricity. StarTech.com recommends that you wear an
anti-static strap when installing any computer component. If an anti-static strap is
unavailable, discharge yourself of any static electricity build-up by touching a large
grounded metal surface (such as the computer case) for several seconds. Do not bump,
jar, or drop the device. Do not set any liquids near the product: if spilled they could
damage the internal electronics. Do not disconnect any cables or power sources while the
hard drive is active: this can result in data loss and possible damage to the hard drive.
Always make sure that your hard drive is fully spun down before removing the device.
System Requirements
•IDECASE35U2: An IBM-compatible computer running Windows XP/2000/Me/98
with an open USB 2.0 port
•IDECASE35F: An IBM-compatible computer running Windows XP/2000/Me/98 or a
Mac computer running OS 8.6 or higher with an open FireWire port
•A3.5” IDE hard disk drive

3
Contents
•1x external storage device
•1x cable (USB 2.0 or FireWire)
•1x power adapter
•1x assorted screws/replacement parts
NOTE: Notebook users may need to purchase a separate 4-to-6 pin FireWire cable in
order to connect the IDECASE35F. Check your computer’s user manual for more details.
StarTech.com carries a wide range of FireWire cables to suit your needs. Visit
www.startech.com and click on the “Cables & Wiring” tab at the top of the screen.
Installation
This section will guide you through the installation of your external drive case. Please
read through the instructions carefully and complete each step in the order listed.
Installing the Hard Drive
NOTE: Before installing the hard disk in the case, make sure that you have properly
configured your hard disk according to your hard disk manufacturer’s specifications.
1. Make sure that the external case is not plugged in and that you are grounded.
2. Using a mini Phillips screwdriver, remove the two screws from the back of the
external case. Slide the caddy free of the aluminum case by pulling on the clear
plastic tab until the caddy is free from the case.
3. Connect the caddy’s power connector to your hard drive’s power port.
4. Plug the caddy’s IDE ribbon to your hard drive’s IDE port, making sure the red stripe
is on pin 1. If you are unsure of the location of pin 1, consult your hard drive
manufacturer.
5. Gently place the hard drive in the caddy, making sure that the screwholes in the hard
drive are aligned with the screw holes in the caddy. Secure the hard drive in place
using the provided screws.
6. Gently slide the caddy back into the aluminum case and re-attach the caddy to the
case using the screws you removed in Step 2.

4
Connecting Your External Case
1. Make sure that your system is turned off.
2. Plug one end of the USB/FireWire cable into an open port on your computer. Plug
the other end into the port on the case.
3. Plug the power adapter into the case and plug the other end into an available power
source.
4. Power the device by flicking the small button on the back to the ON position.
5. Turn your computer on.
Driver Installation
IDECASE35U2
The most up-to-date drivers for this device are available as a free download from our
website. Go to www.startech.com and click on the Downloads link for more information.
NOTE: Depending on your OS and the configuration of your system, the instructions
below may not be identical to the instructions you see on your screen.
1. Windows will automatically detect the new hardware. Click Next.
2. Select the default “Recommended” option and click Next.
3. Insert your driver disk into the disk drive. Make sure that the correct location is
checked and click Next.
4. When Windows finds the appropriate driver, click Next then Finish to complete the
driver installation process.
IDECASE35F
PC Users
While there are no software drivers required for most versions of Windows, Windows
98SE users should download the “1394 Storage Supplement” from the Microsoft website.
Go to www.microsoft.com/windows98/downloads and click on the “Windows 98
Downloads” link. Under “Recommended Updates”, click on “Windows 98 Second
Edition 1394 Storage Supplement” and follow the instructions provided by Microsoft to
complete the update.
Mac Users
Make sure that you have downloaded the appropriate FireWire extension from Apple
before attempting to install this product. Visit www.apple.com and click on the Support
tab or contact Apple for details.

5
Using Your External Case
IDECASE35U2
When the new drive is connected, it will appear as an icon on the bottom right of your
screen. You can double-click the icon for information on the drive. The device will also
appear under your “My Computer” window. You can now use the drive as your would
any other drive on your system.
When you want to remove your external case, first make sure that there is no activity on
the hard drive contained in the case. Do not remove or shut down the case if the green
activity LED is on. When you are certain the hard drive has “spun down,” right-click the
drive icon and click on “Safely remove device.” When the icon is removed from your
screen, turn off the power to the external drive by flicking the power button on the back
to the OFF position and disconnect the USB V2.0 cable.
IDECASE35F
Windows Users
When the new drive is connected, it will appear as an icon on the bottom right of your
screen. You can double-click the icon for information on the drive. The device will also
appear under your “My Computer” window.
When you want to remove your external case, first make sure that there is no activity on
the hard drive contained in the case. Do not remove or shut down the case if the green
LED is on. When you are certain the hard drive has “spun down,” right-click the drive
icon and click on “Safely remove device.” When the icon is removed from your screen,
turn off the power to the external drive by flicking the power button on the back to the
OFF position and disconnect the FireWire cable.
Mac Users
When the new drive is connected, it will appear as an icon on your desktop. You can
double-click or right-click on the icon for information about the drive.
When you want to remove your external case, first make sure that there is no activity on
the hard drive contained in the case. Do not remove or shut down the case if the green
LED is on. When you are certain the hard drive has “spun down,” unmount the drive by
dragging the icon into your Trash folder. When the icon is removed from your screen,
turn off the power to the external drive by flicking the power button on the back to the
OFF position and disconnect the FireWire cable.
NOTE: The green LED on the front of the case indicates that there is activity on the hard
drive.

6
Technical Support
The following technical resources are available for this StarTech.com product:
On-line help:
We are constantly adding new information to the Tech Support section of our web site. To
access this page, click the Tech Support link on our homepage, www.startech.com. In the
tech support section there are a number of options that can provide assistance with this
card.
Knowledge Base - This tool allows you to search for answers to common issues using
key words that describe the product and your issue.
FAQ - This tool provides quick answers to the top questions asked by our customers.
Downloads - This selection takes you to our driver download page where you can
find the latest drivers for this product.
Call StarTech.com tech support for help: 1-519-455-4931 or 00-800-7827-8324.
Support hours: Monday to Friday 9:00AM to 5:00PM EST (except holidays)
Warranty Information
This product is backed by a one-year warranty. In addition, StarTech.com warrants its
products against defects in materials and workmanship for the periods noted below,
following the initial date of purchase. During this period, the products may be
returned for repair, or replacement with equivalent products at our discretion. The
warranty covers parts and labor costs only. StarTech.com does not warrant its products
from defects or damages arising from misuse, abuse, alteration, or normal wear and
tear.
Limitation of Liability
In no event shall the liability to StarTech.com Ltd. (or its officers, directors, employees or
agents) for any damages (whether direct or indirect, special, punitive incidental,
consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss,
arising out of related to the use of the product exceed the actual price paid for
the product.
Some states do not allow the exclusion or limitation of incidental or consequential
damages. If such laws apply, the limitations or exclusions contained in this statement
may not apply to you.

Revised: April 14, 2003