StarTech.com ET90110WDM System manual

10/100 Mbps Fiber to Ethernet Single Mode WDM Media Converter (SC) *** Includes both Endpoints ***
StarTech ID: ET90110WDM
Are you looking for a cost-effective way to deploy or increase the capacity of a fiber cabling solution?
The ET90110WDM allows you to use one single-mode fiber cable for two-way communication at distances
up to 20 Km, reducing fiber cabling costs. Alternatively, you can effectively double the capacity
of your existing fiber infrastructure without the need to install new cabling.
Includes two endpoints required for a single installation.
Applications and Solutions
> Bridging two Ethernet networks using a single fiber cable
Features
> Single mode design allows signals to be transmitted up to 20 Km
> WDM (Wave Division Multiplexing) technology allows the use of a single fiber cable for both sending
and receiving of data (Tx/Rx), reducing the amount of cable required by half
Specifications
> Connector Types 1 - Fiber Optic SC Female
> Connector Types 1 - RJ45 Female

> Product Height 10.24 in [260 mm]
> Product Length 19.29 in [490 mm]
> Carton Quantity 8
> Shipping (Package) Weight 2.43 lb [1.1 kg]
> Product Weight 33.53 oz [950 g]
> Product Width 15.75 in [40 cm]
> Wavelength Tx: 1310 nm / Rx: 1550 nm
> BER < 10^-10
> Sensitivity -32 dBm
> Output Power -18 dBm
> Power Margin 14 dB
> Return Loss -14 dBm
> Supported Cable Type 9/125 um Single Mode (SC Connector)
> Ethernet Network Interface 10/100 Mbits/sec. (via auto-negotiation)
> Switching Mechanism Store and Forward
> Additional Features Link-loss forwarding, loop-back test, remote monitor status
> Network Standards Compliance IEEE 802.3 10Base-T, 802.3u 100Base-TX, 100Base-FX
> MBTF 38,000 hours (minimum)
> Power Adapter 12VDC, 1A