StarTech.com PEX1PCI1 User manual

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 12/12/2018
For the most up-to-date information, please visit: www.startech.com
Installation
NOTE: If the spare PCIe bracket is used, the bracket on the PCI card
must be removed. Full prole PCI cards may not t in the system.
1. Insert the low prole PCI card into the white PCI Slot connector on
the top of the adapter card.
2. Install the adapter card into the motherboard PCIe x1 slot.
Packaging Contents
• 1x PCI Express to PCI Card
• 1x Spare Full Prole Bracket
• 1x Instruction Manual
System Requirements
• PCI Express enabled computer system
• Microsoft Windows® 2000/XP/Vista/7
PEX1PCI1
PCI Express to PCI Card
*actual product may vary from photos
NOTE: PCIe slots are backwards compatible with smaller PCIe cards,
so a x4 or greater slot can be used.
3. Connect the 4 pin power connector to the computer power supply.
4. Power on the computer and load the operating system.
NOTE: No drivers are needed to install the adapter card. It only acts
as a bridge adapter for the PCI card.
*Installation photos are for
reference only*

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow
the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Specications
Bus Interface PCI Express 1.0a (Host)
PCI rev 2.2 (Device)
Chipset ID Pericom - PI7C9X118SL
PCI Card Bus 32-Bit, 33 MHz
Power Connector 4-Pin LP4 Molex
Operating Temperature 0 ~ 850C
Operating System Support Windows® 2000/XP/Vista/7