StarTech.com USB32HDCAPRO User manual

Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: May 20, 2021 7:17 PM
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Product ID (USB32HDCAPRO)
Product Diagram
Front View
Back View
USB 3.0 Capture Device for HDMI® Video
Product Information & Requirements
For the latest drivers, software, manuals, product information, technical specications,
and declarations of conformance, please visit:
www.StarTech.com/USB32HDCAPRO
• HDMI video source with cabling x 1
• HDMI display with cabling (optional for video passthrough) x 1
Package Contents
• USB 3.0 capture device for HDMI video x 1
• 3.3 ft [1 m] USB 3.0 cable x 1
• 3.3 ft [1 m] HDMI cable x 1
• Quick-Start Guide x 1
Installation
Driver Installation
Navigate to www.StarTech.com/USB32HDCAPRO and select the Drivers/Downloads
tab to locate and download the latest Driver.
Software Installation
Navigate to www.StarTech.com/USB32HDCAPRO and select the Drivers/Downloads
tab to locate and download the latest Windows Video Capture Software and the
accompanying Software User Guide.
Hardware installation
1. Connect an HDMI cable (sold separately) to the output port on your video source
device and to the video adapter’s HDMI In port.
2. Connect the included USB cable to the video adapter’s USB port, and to a USB port
on your computer system.
3. Your computer will automatically detect the USB drivers for the video adapter and
install them.
4. To preview the video source that’s being sent through the capture device, by
connecting an HDMI cable (not included) to the video adapter’s HDMI Out port and
to an HDMI display.
*Product may vary from images
HDMI
In
port
Audio
In
port
USB
port
HDMI Out
port *Product may vary from images
To use the video adapter in USB mode, ensure the software installation steps
have been completed before you connect the adapter to your computer.

Regulatory Compliance
FCC - Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could
void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss
of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the
product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the
limitations or exclusions contained in this statement may not apply to you.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com Ltd.
45 Artisans Crescent
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Road
Brackmills,
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands