StarTech.com ICUSB1284D25 User manual
Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 02/06/2015
For the most up-to-date information, please visit: www.startech.com
ICUSB1284D25
6 ft. USB to DB25 Parallel Printer Adapter Cable
*actual product may vary from photos
Packaging Contents
• 1 x USB to Parallel Printer Cable
System Requirements
• Intel-compatible 486DX-66 MHz CPU or higher with an available
USB port
• Windows® 8 (32/64bit), 7 (32/64), Vista (32/64), XP(32/64), 2000,
ME, 98SE; Windows® Server 2008 R2; Mac OS 10.0 – 10.8; Linux
2.6.x – 3.9.x
Installation
Windows / Mac OS
NOTE: Installation on a computer that is running Windows 2000
and later), or Mac OS 10.4 (and later) is automatic
1. Connect the USB to Parallel cable to an available USB port - do
not connect the printer to the cable yet.
2. The OS will detect the cable and install the necessary software
automatically.
Windows 98SE
1. Open a web browser and go to www.startech.com/downloads.
2. Enter the product ID “ICUSB1284D25”and click Search.
3. Select the product from the search results, and download the
available Prolic_PL2305.zip le.
4. Once downloaded, extract the contents using your preferred
utility.
5. Connect the USB to Parallel cable to an available USB port - do
not connect the printer to the cable yet.
6. Windows will detect the adapter and prompt for drivers.
7. Browse to the location that the download was saved and select
the “Prolic_PL2305.zip\MS_pl2305_Win98”folder as the location
to search for drivers.
8. Windows will automatically install the drivers from the download.
Setting Up a Printer Device
1. Turn o your printer. Plug the DB25 connector of the USB to
Parallel Printer cable into your printer or printer cable.
2. Turn your printer and computer on.
3. Plug the USB connector of the cable into the USB port of your
computer.
4. If you have already installed a printer device before click “Start”,
“Settings”,“Printers”. Right-click the default installed printer and
click on “Properties”. The properties dialog box of the installed
printer will appear on your screen.
5. Click the details folder tab and change the printer port to
LPT2:USB to Parallel Port (Win98SE) or USB001 (WinXP *Note that
there may be other USB00x ports, so you may need to try each
one).
6. If you do not have a printer installed yet, click “Start”, “Settings”,
“Printers”, “Add Printer”. The Add Printer Wizard will start and
assist you in installing a new printer device. Select the printer
manufacturer and model name from the list provided by the
wizard or use the driver disk supplied with your printer.
7. When prompted which port the printer will use, click on LPT2:USB
to Parallel Port (Win98SE) or USB001 (WinXP *Note that there may
be other USB00x ports, so you may need to try each one).
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access
our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned
for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow
the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
Specications
Bus Interface USB 1.x
Connectors 1 x USB type A male
1 x 25-pin D-Sub (DB25) female
Maximum Data Transfer Rate 1.5Mbps
Power Adapter USB powered
Operating Temperature 5°C ~ 40°C (41°F ~140°F)
Storage Temperature -20°C ~ 70°C (-4°F ~ 158°F)
Humidity 0% ~ 80% RH
Cable Length 1.8m / 6ft
Operating System Support
Windows® 8 (32/64bit),
7 (32/64), Vista (32/64),
XP(32/64), 2000, ME, 98SE
Windows® Server 2008 R2
Mac OS 10.0 – 10.8
Linux 2.6.x – 3.9.x
