StarTech.com ST7300USBME User manual

Instruction Manual
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 05/18/2016
For the most up-to-date information, please visit: www.startech.com
Packaging Contents
• 1x 7-Port Industrial USB 3.0 Hub
• 1x USB 3.0 A - B Cable
• 1x DIN Rail Mounting Kit
• 1x Terminal Block (2 Wire)
• 1x Instruction Manual
Installation and Operation
Supplying external power is highly recommended to ensure
sucient power/current is delivered to each USB 3.0 port; however,
the hub can be powered by the connected host computer for low
power consuming USB devices.
1. If already inserted into the hub, gently yet rmly pull the terminal
block connector housing from the hubs casing.
2. Using a small screwdriver (Phillips or Flat Head), loosen the screws
for the terminal block connectors.
3. Connect the power and ground wires from your DC power source
to the proper terminal block connectors and fasten the screws.
The terminals are marked on the hubs casing.
Note: Ensure the polarity of the input power is correctly matched
with the terminal block pins to ensure proper function.
4. Reinsert the terminal block housing into the hubs casing. The
“Power” LED on the hub should then light up green.
5. Using the provided USB 3.0 A - B cable, connect the hubs USB 3.0
host port to an available USB port on your host computer system.
Note: If connected to a USB 2.0 host port, the hub will only operate
at USB 2.0 speeds.
6. Your computers operating system should detect the USB hub and
automatically install it.
7. Connect your USB peripherals to the USB 3.0 hub ports.
8. If desired, mount the hub on your DIN rail, or your wall.
System Requirements
• USB-enabled computer system with an available USB port
• 2-wire 7~48V DC power source
• OS Independent
Product Overview
Front View
ST7300USBME
7-Port Industrial USB 3.0 Hub with ESD Protection
Power LED USB 3.0 Host Port
USB 3.0 Hub Ports
2-Wire Terminal
Block-included
(7~48V DC Input)
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per StarTech.com
ST7300USBME o cerca il tuo prodotto tra le migliori offerte di Hub

FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the
equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)
to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all
trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and
access our comprehensive selection of online tools, documentation, and downloads.
For the latest drivers/software, please visit www.startech.com/downloads
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be
returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages
arising from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,
consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not
allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.
DIN Rail Mounting:
1. Fasten and secure the provided DIN rail clips and screws to the
rear of the hubs casing, and then mount on your DIN rail.
Wall-Mounting:
1. Fasten and secure the hub to your wall using the hubs integrated
wall-mounting holes and screws.
Wall-mounting holes
DIN Rail Clips