Stavoklima Li0 light IR 100 User manual

Li0 light 100/150/200/250 S IR
USER’S MANUAL
STAVOKLIMA Saudi 1
Li0-light
EN
Air Curtain
Li0 light 100/150/200/250 S IR
USER'S MANUAL
Email: [e-mail]
Tel: + 966 (011) 22 00 313
Fax: + 966 (011) 22 00 313 Ext. 116
www.stavoklima.com.sa

Li0 light 100/150/200/250 S IR
USER’S MANUAL
STAVOKLIMA Saudi 2
Li0-light
EN
1.0 Contents
1.0 Contents .............................................................................................................................. 2
2.0 Foreword .............................................................................................................................. 3
3.0 Introduction.......................................................................................................................... 4
3.1 Dimensions ....................................................................................................................... 5
3.2 Product info ...................................................................................................................... 6
3.3 Technical parameters....................................................................................................... 6
4.0 Package contents ................................................................................................................. 7
5.0 Unboxing............................................................................................................................... 8
6.0 Safety precautions ............................................................................................................... 9
6.1 Fire Safety......................................................................................................................... 9
7.0 Unit description.................................................................................................................. 10
8.0 Installation.......................................................................................................................... 11
8.1 Required tools ................................................................................................................ 13
8.2 Wall mounting................................................................................................................ 14
8.3 Mounting options........................................................................................................... 16
8.4 Suspended mounting..................................................................................................... 18
8.5 Connecting the unit........................................................................................................ 19
8.6 Commission .................................................................................................................... 22
9.0 Remote controller.............................................................................................................. 23
9.1 Buttons............................................................................................................................ 23
9.2 Control Range................................................................................................................. 24
9.3 Fan Speed Regulation..................................................................................................... 25
9.4 Door Contact .................................................................................................................. 25
9.5 Windy mode ................................................................................................................... 25
9.6 Cold Saving mode........................................................................................................... 26
9.7 Power.............................................................................................................................. 26
9.8 Batteries.......................................................................................................................... 26
10.0 Maintenance ...................................................................................................................... 27
10.1 Filter maintenance ......................................................................................................... 27
10.2 Maintenance schedule................................................................................................... 29
11.0 Troubleshooting................................................................................................................. 30
12.0 Important Warnings........................................................................................................... 32
13.0 Contact Info........................................................................................................................ 32

Li0 light 100/150/200/250 S IR
USER’S MANUAL
STAVOKLIMA Saudi 3
Li0-light
EN
2.0 Foreword
Thank you for choosing Stavoklima!
At Stavoklima we believe in quality, performance and cost-effectiveness. All our products are
hand-build in the Czech Republic, in the heart of Europe, from the best components available.
We produce all the metal parts ourselves from carefully selected metal sheets using high-end
metal processing machines. We apply very strict quality control from the very beginning of the
production process to the moment of delivery to your door. Customer’s satisfaction is our
highest priority.
The core component of every air curtain are the fans. Inside every Stavoklima unit you will find
long-lasting maintenance-free fans from the World fan industry leader –German company
Ziehl-Abegg. All fans are ErP2015 compliant –provide high energy efficiency with respect and
protection to the environment.
The custom-made control unit reflects over 25 years of experience and presents wide variety
of control options with high level of reliability ensuring a quality product with a long lifespan.
All internal electronics comply with SASO directives and the latest standards.
Stavoklima air curtains are made to last & keep occupants comfortable while minimizing
negative environmental impacts. We bring you the European standard of indoor climate
protection.
”Open your doors for the public without compromising the comfort. ”
Compliance chart:
ErP 2015
Fan efficiency European norm
CE mark
Compliant with European Standards
SASO Certificate
Certified for Saudi Arabian
STAVOKLIMA® Quality Control
Stavoklima-specific high-degree quality assurance program

Li0 light 100/150/200/250 S IR
USER’S MANUAL
STAVOKLIMA Saudi 4
Li0-light
EN
3.0 Introduction
The Li0 light air curtain is an ideal solution for shops, boutiques, restaurants, households, banks
and hotels where cost-effective protection of inner climate is required. The Li0 light air curtain
is designed for wall mounting over the door with alternative ceiling mounting options
(accessory for ceiling mounting not part of the standard delivery) and offering wide variety of
control options.
An air curtain is a device which generates an engineered stream of guided air through a
doorway or an opening acting as a separator of two adjacent areas against energy loss,
humidity, and mass exchanges.
Taking into account the door dimensions and climate consideration, only a well-made air
curtain with appropriately designed system will create the tight barrier across the entire height
and width of the opening helping to contain conditioned air when the door or entrance is
opened.
Every unit is equipped with automated directable outlet louvre with three presets of air flow
vector for normal operation, windy mode and cold saving mode. The air curtain can be
operated manually using the remote controller or automatically via magnetic door contact. The
supplied remote controller is IR-based technology and works only if the transmission directed
to the air curtain. In conjunction with supplied door contact it constitutes an autonomous
system that is switched ON only when needed. The integrated delayer complements the
longevity of the unit and provides stable operation in situations where doors are opened and
closed with high frequency.
The Li0 light air curtain is designed to operate indoor in temperatures between 0°C and +54°C.
The housing is made from powder coated galvanized steel sheet, contains inside (1) the electric
box, (2) accelerating fans, (3) a plenum, and (4) the outlet louvre. Available lengths 1, 1.5, 2 &
2.5 meters.
The unit is fully capable of running 24/7. The default paint is RAL 9006 (silver metallic). Custom
build is available with different RAL colors targeting all decoration criteria.
‘’Going above and beyond customer expectations.”

Li0 light 100/150/200/250 S IR
USER’S MANUAL
STAVOKLIMA Saudi 5
Li0-light
EN
3.1 Dimensions

Li0 light 100/150/200/250 S IR
USER’S MANUAL
STAVOKLIMA Saudi 6
Li0-light
EN
3.2 Product info
Li0 light is the core product of the Li product line. It is designed for standard door size not higher
than 2,7 meters. It houses radial fans with outstanding performance with additional noise-
cancelling materials applied to the critical parts of the unit. The air volume is being equally
distributed across the entire width of the outlet thanks to specifically angled air chamber
(plenum).
3.3 Technical parameters
Technical specifications
Li0 light IR 100
Li0 light IR 150
Li0 light IR 200
Air volume
(fan speed 4, 3, 2, 1)
m3/h
1989
3073
4176
1500
2174
3001
1249
2009
2499
822
1449
1777
Length
mm
100
150
200
Power
V
230
230
230
Number of fans
pcs
2
3
4
Nominal power
kW
0,7
1
1,4
Nominal current
A
3
4,5
6
IP protection level
IP
22
22
22
Controller
type
IR
IR
IR
Outlet width
mm
60
60
60
Noise level at 3 m
dB
60
61
62,5
Weight
kg
37,8
49,4
64,3
fan speed voltage: stage 4 - 230V, stage 3 - 180V, stage 2 - 160V, stage 1 - 120V
fans: safety margin 15% for 60 Hz voltage frequency
Selected product

Li0 light 100/150/200/250 S IR
USER’S MANUAL
STAVOKLIMA Saudi 7
Li0-light
EN
4.0 Package contents
Every unit is packed in a paper box made of recycled cardboard protected by cardboard fins.
The air curtain housing is wrapped around in a LDPE bag for additional moisture protection.
The contents of the packaging are the following:
Li0 light air curtain (1x)
Remote controller (1x)
Allen key (2x)
Wall suspension(2x) with screws (4x)
Power cord (1x)
Door contact (1x)
User’s manual (1x)

Li0 light 100/150/200/250 S IR
USER’S MANUAL
STAVOKLIMA Saudi 8
Li0-light
EN
5.0 Unboxing
Before unboxing, please check the integrity of the packaging itself. If you spot any visible
damage (dents, creases, deformations, bent corners, etc.) do not continue the unboxing
process and report these to the supplier. Unboxing a damaged packaging without reporting
back to the supplier passes the responsibility for the condition of the contents of the packaging
onto the end user.
During unboxing, check carefully the contents of the packaging and inspect all the parts
identified in the previous chapter. If you received extra accessories (aside of the packaging),
use common sense and/or supplier’s instructions to unbox & inspect these.
Make a record of any damaged parts and report back to the supplier.
Transport and handling must be performed with a relevant equipment with adequate capacity.
The packaging should be handled with care and by personnel with relevant qualification only.
WARNING: Follow the instructions on labels placed on the unit. Packaged
units must not be tilted or placed in positions other than as delivered or
recommended by the manufacturer. The packaging also bears the serial
number and type of the unit for easy identification of the unit type.
RECYCLING: Please recycle the packaging in compliance with your local
environmental standards.
STORAGE: Storage conditions for unopened packaging is temperature range
from -10 °C to+50 °C, humidity50-85% non-condensing.

Li0 light 100/150/200/250 S IR
USER’S MANUAL
STAVOKLIMA Saudi 9
Li0-light
EN
6.0 Safety precautions
Observe the generally applicable country-specific regulations, in particular CSN 12 2002 and
other related regulations. The unit must be disconnected from the mains when performing any
service. Connections and grounding of the unit or its parts must comply especially with CSN
332190, 332000-5-51, 33 2000-5-54. Any electrical servicing must be performed by personnel
with professional qualification in accordance with Section 6 of CBU Regulation no. 50/78 Coll.
6.1 Fire Safety
Observe the country-specific standards and applicable regulations. In particular CSN 061008 –
Fire safety of appliances and heat sources, CSN 730823 Fire-technical properties of materials –
degrees of combustibility. Install the unit 150 mm from combustible materials of classes B, C1,
C2, 400 mm from easily combustible materials (class C3), and 1000 mm in the direction of
radiation (air outlet of the unit).

Li0 light 100/150/200/250 S IR
USER’S MANUAL
STAVOKLIMA Saudi 10
Li0-light
EN
7.0 Unit description
The description of the individual parts of the unit is for informative purposes only.
Disassembly of the unit should be performed by authorized personnel only!
Inlet grill and IR receiver plastic cover
Positionable outlet louvre with a pull bar linked to actuator
Radial fans with condenser and connection rack
Control unit cabinet with IR receiver
Wall-mounting bracket
Filter bracket with removable filter
1
2
3
4
5
6
1
2
3
4
5
6
7

Li0 light 100/150/200/250 S IR
USER’S MANUAL
STAVOKLIMA Saudi 11
Li0-light
EN
Air curtain chassis with angled air chamber (plenum) and service door
8.0 Installation
The air curtain is suspended at four suspension points located on both sides of the
unit ‒ two on top right and two on the top left side. Connection is performed using 4 screws
with standard M8 threads. These screws are included. During the installation, always make sure
all screws and fasteners are used and properly tightened.
Use adequate wall plugs and anchors only. Consider carefully the installation situation and the
suitability of used fasteners and anchors as well as the strength of the structure. Make sure the
wall is capable of supporting the weight of the unit. The manufacturer is not liable for
improperly used wall plugs or other inappropriate fastening or suspending material. Do not
install in humid, biological treatment or explosive areas where an aggressive atmosphere may
be present. Do not touch the fan blades!
Follow all local safety regulations and use common sense to avoid injury of self or others.
Before installation, perform the following:
1) Consider carefully the strength and load capacity of the supported structure. Make sure
the wall/ceiling is capable of supporting the weight of the unit. Do not attach to drywall,
plaster board, suspended ceilings, etc.
2) The air curtain is intended to be installed and mounted horizontally. Do not mount in
other positions!
3) Determine the exact mounting location. The unit must be installed in the center of
selected clearance, keeping the opening sealed along the entire length of the air curtain.
Do not exceed the recommended installation height and width!
4) Use adequate wall plugs and anchors only, with suitable tools for installation and lifting.
5) During lifting and installation, do not stand underneath the unit.
6) The air curtain is suspended at four suspension points located on the top of the unit. All
suspension points must be used and secured.
7) Make sure all screws and fasteners are used and properly tightened.
8) The unit has to be kept clean and dry while being installed.
9) The air curtain must be close as possible to the upper edge of the opening.
10) The air stream barrier must not be obstructed with upper door frame or sliding doors
for all automated air flow vector (normal operation, windy mode and cold saving mode).
Please apply these installation instructions for later re-installation, to be available throughout
the life of the unit.
7

Li0 light 100/150/200/250 S IR
USER’S MANUAL
STAVOKLIMA Saudi 12
Li0-light
EN
For proper performance, do not install the unit any higher than 2,7 meters.
WARNING: Installation is performed at one's own risk. Any damage resulting
from inappropriate handling is not covered by the warranty.

Li0 light 100/150/200/250 S IR
USER’S MANUAL
STAVOKLIMA Saudi 13
Li0-light
EN
8.1 Required tools
In order to successfully install the air curtain, additional tools are needed. Make sure the
selection of the tools corresponds to the material of the wall. If not, alter the required tools list
accordingly.
List of recommended tools:
Electric drill tool (1x)
Not part of the packaging
Wall plug and M8 screw (4x) or other
fasteners suitable for given situation
Not part of the packaging
Allen key (1x)
Chemical anchor (1x)
Not part of the packaging
Water Level (1x)
Not part of the packaging
Screwdriver (1x) or multi-purpose tool
Not part of the packaging
Meter measure (1x)
WARNING: Any damage resulting from the use of unsuitable tools or
inadequate fasteners is not covered by the warranty.

Li0 light 100/150/200/250 S IR
USER’S MANUAL
STAVOKLIMA Saudi 14
Li0-light
EN
8.2 Wall mounting
Please follow these steps in order to mount the air curtain on the wall:
1) Using the meter measure and water level, mark the drilling points for the wall brackets
on the wall. Follow the drilling spacing at the bottom of this page.
2) Drill the holes for wall plugs and anchors. Always use adequate drill bit for selected wall
plugs.
3) Apply chemical anchor inside the drill holes.
4) Insert the wall plugs into the wall.
5) Screw in the M8 screws or equivalent fasteners. Do not fully tighten (allow approx.
1 cm distance between the screw head and the wall).
6) Put the wall brackets in place. Use wider openings at the bottom of mounting holes to
pass through the screw heads and gently press the wall brackets down. The brackets
will lock in the place. The horizontal mounting flaps should face inwards (see picture
below).
7) Tighten the screws. If done properly, the wall bracket should be tightly attached to the
wall.
8) Allow the chemical anchor to harden (if used).
9) Lift the air curtain using appropriate handling tools.
10) Use supplied screws to attach the air curtain to the wall bracket and tighten all the
screws using the supplied Allen key.
Drilling spacing and recommended mounting

Li0 light 100/150/200/250 S IR
USER’S MANUAL
STAVOKLIMA Saudi 15
Li0-light
EN
The supplied wall brackets offer two mounting
options depending on the desired distance from
the wall. Select the closest set of mounting holes
to minimize the offset of the unit.
The unit should be supported for the entire time
until all four screws are properly fastened.
When mounted, make sure the unit is stable and
fit for operation. Check the wall around the
mounting points regularly.
WARNING: Use suitable lifting equipment and keep the unit secured for the
entire time of the installation. Any damage resulting from the use of
inadequate lifting equipment or handling is not covered by the warranty.
ALTERNATIVE MOUNTING: If conditions does not allow wall mounting,
please contact the supplier for alternative mounting options.
OPTIMAL MOUNTING: For the best sealing effectiveness, an air curtain must
be installed at its optimum. In order to achieve the best performance, make
sure the unit is centered above the door, it covers the entire width of the
door and it is mounted in proximity of the top of the door. The offset of the
door should be minimal.

Li0 light 100/150/200/250 S IR
USER’S MANUAL
STAVOKLIMA Saudi 16
Li0-light
EN
8.3 Mounting options
The wall brackets have two sets of mounting holes. One set allow mounting in 5 cm distance
from the wall. The other set moves the unit 8 cm from the wall:
5 cm offset
8 cm offset

Li0 light 100/150/200/250 S IR
USER’S MANUAL
STAVOKLIMA Saudi 17
Li0-light
EN
There are two alternative mounting options for the supplied wall brackets:
Standard mounting
Reverse mounting

Li0 light 100/150/200/250 S IR
USER’S MANUAL
STAVOKLIMA Saudi 18
Li0-light
EN
Respect the minimal distances from the ceiling and the wall in order to use the full potential
of the unit:
Air inlet must be at least 200 mm far from the wall to ensure unobstructed air movement.
8.4 Suspended mounting
To hang the unit from a ceiling:
1) Four threaded inserts are located on the top of the unit for top suspension mounting.
2) Determining the height of four Suspension Rods required and where they are to be
located. The suspension rods are not provided with the unit.
3) Take the time to meet the load, weight, studding connectors, and chemical anchors
requirements.
4) Additional hanging elements, extension kits, and washers might be needed with regard
to ceiling height, air curtain’s weight, fasteners, strength and load capacity. Hanging
elements and extension kits are not provided.
5) Allow the chemical anchor to harden (if used).
6) Lift the air curtain using appropriate handling tools.
7) Mount and level the air curtain by screwing four suspension rods into the threaded
inserts located at the top corners of the unit.
8) The unit should be supported and secured for the entire time of installation.

Li0 light 100/150/200/250 S IR
USER’S MANUAL
STAVOKLIMA Saudi 19
Li0-light
EN
8.5 Connecting the unit
The air curtain requires connection to electrical network of 220 V (AC) at 60 Hz using TYPE G
electrical connector (UK plug) with circuit breaker rated to 13 A. Therefore a BS 1363 electrical
socket is required (British Standard 13 A socket-outlet) for powering the air curtain:
BS 1363 (TYPE G) socket BS 1363 (TYPE G) plug
Connecting points are located on the top of the unit. Please use only supplied power cable and
door contact.
Air curtain shall be installed in accordance with national wiring regulations. Overload or
shortage of power circuit could cause an electric shock or a fire. When drilling into the wall or
ceiling, do not cut or damage hidden wires and other utilities. Connection to a higher voltage
will result in fire, electric shocks, and damages.
Power failure during operation will stop the unit completely, the unit will resume operation
according to the last sets prior to power failure.

Li0 light 100/150/200/250 S IR
USER’S MANUAL
STAVOKLIMA Saudi 20
Li0-light
EN
WARNING: Connecting is performed at one's own risk. Prior to connecting
the air curtain to the electrical network, check the integrity of all supplied
cables. If you detect any damage, do not connect the unit and contact the
supplier. Any damage resulting from inadequate handling is not covered by
the warranty.
Connection points (Power + door contact)