Stealth Cam STC-I430IR User manual

STC-I430IR
User’s Manual
Toll Free Customer Support 1-877-269-8490
.stealthcam.net
Version 1.0 04/08

STC-I430IR
www.stealthcam.net Toll Free 877-2 9-8490 2
For Customer Service or Warranty Information Call Toll Free
877-269-8490
Stealth Cam, LLC
P.O. Box 539504
Grand Prairie, TX 75053-9504
www.stealthcam.net
Stealth Cam Limited Warranty
Your Stealth Cam scouting camera is covered by a 90 days Limited Warranty
on parts and labor from the date of original purchase, and purchases must be
made through an authorized dealer. The warranty covers defects in
workmanship and materials. The warranty does not apply to units, which have
been damaged or abused intentionally or unintentionally. A purchase from
individuals or unauthorized internet sites voids the warranty.
Tampering with or altering the unit will void the warranty. Any unauthorized
service will void warranty. Original sales receipt must be produced for any
warranty service and a Return Authorization (RA) number must be obtained
from customer service at 877-2 9-8490 prior to returning product.

STC-I430IR
www.stealthcam.net Toll Free 877-2 9-8490 3
Manual Contents
Camera overview 4
Camera kit contents 7
Battery and memory Installation 8
Definitions 12
Set up and programming 14
Camera use 19
Mounting the camera 20
Viewing & Deleting images 25
Memory compatibility chart 32
Technical Specs 33
General Information 3
Image capacity chart 38
Moon Phase Chart 40

STC-I430IR
www.stealthcam.net Toll Free 877-2 9-8490 4
Camera overvie
Front housing image with major parts indication.

STC-I430IR
www.stealthcam.net Toll Free 877-2 9-8490 5
Open view image with major parts indication
For use with Stealth Cam cable
only. (sold separately)

STC-I430IR
www.stealthcam.net Toll Free 877-2 9-8490 6
Side view with major parts indication

STC-I430IR
www.stealthcam.net Toll Free 877-2 9-8490 7
Camera kit contents
• Model STC-I430IR Digital Scouting Camera
• User Manual.
• USB cable.
• Strap.

STC-I430IR
www.stealthcam.net Toll Free 877-2 9-8490 8
Battery & memory installation
The Stealth Cam STC-I430IR Advanced Digital Scouting Camera is
designed to operate using two different types of battery power options.
NOTE: Always have camera in the OFF position when installing or
removing batteries. Removing battery while the camera is in operation
may damage the camera.
Batteries “C” cell:
The internal battery compartment accepts x “C” cell batteries. Be
sure to use high quality brand name alkaline batteries. Install batteries
with correct polarity (+/-) as noted inside the battery compartment.
Warning:
Do not use different Voltage lead
acid battery other than the one specified in
this section. Doing so will damage the camera
and will void the warranty.

STC-I430IR
www.stealthcam.net Toll Free 877-2 9-8490 9
12V Lead Acid external battery
The STC-I430IR is equipped with an external power jack designed to
accept a barrel plug cable to attach to a sealed lead acid battery. (sold
separately). This will enhance the camera’s field life. Battery cable and
complete 12V Lead Acid battery kits are available wherever Stealth
Cam scouting cameras are sold or call toll free 877-2 9-8490. Only
Stealth Cam external battery accessories are recommended.
• Insert the external battery barrel plug into the DC 12V jack on
the bottom of camera housing
• Turn the camera power on.
 Please make sure the voltage and polarity (+/-) are correct
before connection. Incorrect voltage or polarity (+/-) will
damage the camera.
Please note: When both internal and external batteries are connected,
the camera will draw power from the higher voltage
source first.

STC-I430IR
www.stealthcam.net Toll Free 877-2 9-8490 10
Memory Options
Your STC-I430IR camera is equipped with 32MB built in flash memory.
The camera is also equipped with an expandable media card slot
capable of accepting up to 2GB SD card (sold separately). With no
memory card inserted into the slot, the camera will use the built in
32MB memory. If an SD card is inserted into the slot then the camera
will bypass the built in memory, and utilize the SD memory for image
storage. The front counter display will show the number of images on
the built in memory unless the expansion card is inserted at which point
the counter will only show the number of images in the expansion card.
Inserting SD card
ake sure camera is in the OFF position whenever adding or
removing memory.
• Insert SD memory card in to the SD card slot completely and in
the correct direction, as shown by the SD picture printed at the
side of the housing.
• To remove the SD memory card, depress the SD card and pull
out the card gently.

STC-I430IR
www.stealthcam.net Toll Free 877-2 9-8490 11
 SD cards must be clean (no images from other sources). If
you are using the SD card from other cameras, please
make sure to format the SD card in your computer using
FAT formatting, not FAT32, prior to use in the camera.
New cards are good to use straight from the package.

STC-I430IR
www.stealthcam.net Toll Free 877-2 9-8490 12
Definitions
• Time out: To set the amount of time in minutes the camera will
sleep between PIR triggering.
• IR Emitter:
o Auto – IR LED turns on base on surrounding light
conditions.
o Off – Turn off IR Emitter.
• Capture mode:
o 1P ~ 9P : 1 to 9 burst mode image capturing per PIR
triggering.
o Video: 5 to 90 seconds adjustable video per PIR triggering.
• Resolution:
o 4.0M : Select this option to capture a 4.0M pixels image.
(High image quality)
o 1.3M : Select this option to capture a 1.3M pixels image.
(Low image quality)

STC-I430IR
www.stealthcam.net Toll Free 877-2 9-8490 13
o 0.3M : Select this option to capture a 0.3M pixels image.
(Base image quality)
o Video resolution (320 x 240): This is the resolution during
video capturing.
• Batteries Status: It shows the battery status.
o Full: It shows the battery is full.
o Lo : It shows the battery is low and front Low Battery
indicator will also blink.
 When the camera has detected low batteries, (Batteries are
lower then 5.8 +/-0.2Volts) the camera unit will power off
within 30 seconds automatically. Please replace with new
batteries; otherwise the camera will not work properly.
• Day and Time: Displays the date and time that you have set
on still image. For AVI it will appear on the last frame. (Using
Quick Time Player or Real Player).
• Moon phase and Temperature: Displays the moon phase and
temperature. For AVI it will appear on the last frame. (Using
Quick Time Player or Real Player).

STC-I430IR
www.stealthcam.net Toll Free 877-2 9-8490 14
Set up and Programming
When the camera is first turned on the internal LCD screen
displays the camera status. The follo ing information is present
on this screen.
IR Emitter Mode Control:
The camera is pre-programmed ith Auto IR Emitter setting.
• Switch the camera to ON position.
• To turn off the IR Emitter mode, press the [UP]
button once within 30 seconds. icon will
appear on the top of the screen.
• To turn on the IR Emiiter mode back to Auto setting, press the
[UP] button the second time. icon will appear on the top of
the screen.
If no buttons are pressed after 30 seconds, the LCD screen will
power down to conserve battery life and enter 1 minute count
down to enter PIR detection mode. To re-power the display

STC-I430IR
www.stealthcam.net Toll Free 877-2 9-8490 15
screen, press and hold the UP or DOWN button until the status
screen appears.
Programming the Stealth Cam STC-I430IR
Switch the camera to the ON position. LCD screen will display the
camera status screen. Press the MENU button within 30 seconds to
enter programming mode.
If MENU button is not pressed within 30 seconds, camera will
automatically enter PIR detection mode.
Set the Resolution: The first program setting is resolution. The word
RESOLUTION will be blinking
• Press [OK] button to choose the selection
• Press the [UP] or [DN] button to select the desired resolution
(HIGH/LOW/BASE) and press [OK] to save and exit to
CAPTURING setting
Set the Capturing sequence. The Stealth Cam STC-I430IR can be
programmed to shoot 1~9 pictures per triggering or 5~90 seconds
of video.

STC-I430IR
www.stealthcam.net Toll Free 877-2 9-8490 16
• This word CAMERA will be blinking
• Press [OK] button to choose picture mode then press the [UP]
or [DN] button to select the desired capture setting (number of
pictures per triggering).
• Press [OK] to confirm your selection.
• If you want to choose video mode, when the word CAMERA is
blinking, press [UP] to choose video mode. Now the word
VIDEO will be blinking. Press [OK] to confirm your selection.
• Press [UP] or [DN] button to select the desired video length
(from 5 seconds to 90 seconds in 5 seconds increment)
• Press [OK] to save and exit to TIME OUT setting.
Set the Time out:
• The word TIME OUT will be blinking
• Press [OK] button to choose the selection. The digit will now
be blinking ready for change.

STC-I430IR
www.stealthcam.net Toll Free 877-2 9-8490 17
• Press [UP] or [DN] button to increase or decrease the time
value in minutes from 01 to 59 minutes.
• Press [OK] to save the setting and exit to Date & Time setting.
Set Date and Time: This camera uses the 24hr military time
format.
• The DATE will be blinking. Press [OK] one more time to enter
time setting first.
• Minute digit will be blinking. Press [UP] or [DN] to increase or
decrease the minute value (0 – 59)
• Press [OK] to confirm the minute setting and enter hours
setting.
• Hour digit will be blinking. Press [UP] or [DN] to increase or
decrease the hour value (00 – 23)
• Press [OK] to confirm the hour setting and enter month setting.
• Month digit will be blinking. Press [UP] or [DN] to increase or
decrease the month value. (1 - 12)

STC-I430IR
www.stealthcam.net Toll Free 877-2 9-8490 18
• Press [OK] to confirm the month setting and enter date setting.
• Date digit will be blinking. Press [UP] or [DN] to increase or
decrease the date value. (01 – 31)
• Press [OK] to confirm the date setting and enter year setting.
• Year digit will be blinking. Press [UP] or [DN] to increase or
decrease the year value. Once this is done, press [OK]. You’ll
see the word {dEL} blink. Now press [MENU] to exit program
setting and back to status screen.
At the end of each program set up selection, you may press
[MENU] to exit and return to camera status ready screen for the 1
minute count do n mode to enter PIR capturing.

STC-I430IR
www.stealthcam.net Toll Free 877-2 9-8490 19
Using the camera
Once all program setting has been completed your Stealth Cam is
ready for field use.
Getting started
It is recommended that you mount the camera 4-5 ft off the ground
with the camera pointed at a slight downward angle. Be sure to avoid
mounting the camera facing east or west as the rising and setting of
the sun could produce false triggers and overexposed images. Clear
all branches and other debris away from the front of the camera so
as not to block the camera lens or PIR sensor.
PIR Coverage Area
Diagram

STC-I430IR
www.stealthcam.net Toll Free 877-2 9-8490 20
Mounting the camera
Mounting the camera ith Tree Scre (Optional Accessory sold
separately)
• Hand twists the screw into the tree or post at the desired
position.
• Attached the camera to the screw by turning the camera onto
the mounting screw to the desired position.
• Tighten the stabilizer nut.